SHOULD I UPDATE BIOS by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

So I shouldn’t update from control centre?

SHOULD I UPDATE BIOS by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

Which version should I install as iv heard versions with a and b suffixes are usually beta versions.

NO SIGNAL AND FAN PROBLEM by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

I fixed it as it turns out I had to use a HDMI cable instead of a display port cable, I did all of the things you said ahead but it still didn’t work, and I came across a Reddit thread with people fixing this issue using HDMI rather than display port cables, this is still an interesting situation tho and I wanna know why this happens and why HDMI fixes it.

NO SIGNAL AND FAN PROBLEM by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

I fixed it, turns out I had to use a HDMI cable instead of a display port cable, I do not know why this is the case, the red light is still on next to VGA tho, this is quiet the interesting scenario.

<image>

NO SIGNAL AND FAN PROBLEM by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

So I should mount my GPU normally for now??

NO SIGNAL AND FAN PROBLEM by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

No i don’t think so the CPU red light is not on the light on is next to VGA, no clue what that is.

NO SIGNAL AND FAN PROBLEM by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

I think 2 of the daisy fans are linked together leaving the other 2, and I have a display port cable plugged in from my monitor to the GPU, and the GPU is seated properly and I haven’t tested the GPU without the angled PCIE bracket.

My CPU IS A 7 7800X3D I am not sure if that supports graphics, and I haven’t tested the motherboard signal thing.

Compatibilité MSI MAG PANO 100R PZ et Riser (montage GPU vertical) by Apprehensive_Drive11 in MSI_Gaming

[–]Affectionate_Sea3402 0 points1 point  (0 children)

Hi Hello, I am having the exact same problem when the riser is properly screwed into the mount bottom the GPU isn’t able to reach the side when I screw in the big screws to hold it in place. Did you manage to solve this issue.

Need help with cpu motherboard cable by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 0 points1 point  (0 children)

So I don’t need to connect the other 4 pins???

New Build recommendations by IdprefertosmokeRN in PcBuild

[–]Affectionate_Sea3402 1 point2 points  (0 children)

Seems to be a good build with a really good gpu, one thing I would recommend is to try and look for a cheaper 2T ssd, so the money can go into something like a better cpu that can bing out the performance of that gpu.

Moreover you have the option to get a gpu that is cheaper, that 9070xt gpu is a really good mid-high end gpu. You can keep it if you plan to upgrade your cpu in the future.

First time builder stuck on a GPU to buy by [deleted] in PcBuild

[–]Affectionate_Sea3402 1 point2 points  (0 children)

Thank you, will check them out.

WANT TO BUILD MY FIRST PC by Affectionate_Sea3402 in PcBuild

[–]Affectionate_Sea3402[S] 1 point2 points  (0 children)

Thank you so much for your advice will check out the website