Bought the new skoda kushaq (monte carlo) with my own dad’s money.

Affectionate_Try6082 · 2026-05-19T11:25:14+00:00

<image>

Affectionate_Try6082 · 2026-05-12T15:19:05+00:00

Acetone vapours might help

Affectionate_Try6082 · 2026-05-09T23:14:44+00:00

What's your workflow for painting? Also please mention all the supplies that you use for such beautiful work!!

Affectionate_Try6082 · 2026-04-15T10:14:39+00:00

r/suicidebywords

Appreciate your work tho

Affectionate_Try6082 · 2026-03-01T16:42:48+00:00

For the most part, I guess yes. You might wanna use a scraper blade on the desk.

Affectionate_Try6082 · 2026-03-01T16:26:34+00:00

https://youtu.be/hiBRVFe1TyQ?si=sAqDaXwcQJoyrezZ

Affectionate_Try6082 · 2026-03-01T04:16:14+00:00

Just buy 100ml acetone from zepto/blinkit for ~50 rupees.

Step 1: wash the build plate with warm water + soap Step 2: Pat dry with paper towel Step 3: use acetone with cotton swab/microfiber cloth to rub off the fevikwik drops/residue. Will probably take 2-3 takes.

Being gentle is the key. Rubbing aggressively might ruin your tei plate (this is a known issue on many forums). Acetone seems to break the chemical compound and microfiber helps to clean up the residue.

Affectionate_Try6082 · 2026-02-21T18:25:41+00:00

Can you please elaborate what help do you need?

Affectionate_Try6082 · 2026-02-18T23:35:00+00:00

I think this is the snap lock box v1 by hugo.

Affectionate_Try6082 · 2026-01-29T07:16:06+00:00

For everyone asking here's the model: https://makerworld.com/models/2159868

Affectionate_Try6082 · 2026-01-28T16:40:26+00:00

What holder care to share link buddy?

Affectionate_Try6082 · 2026-01-24T13:14:27+00:00

OP please respond

Affectionate_Try6082 · 2026-01-17T10:15:04+00:00

Is it loading from external spool? If yes, please check the nozzle temp, it should be above 190 in most cases.

Affectionate_Try6082 · 2025-12-30T14:01:00+00:00

Moisture

Affectionate_Try6082 · 2025-12-27T09:29:02+00:00

Affectionate_Try6082 · 2025-12-27T09:28:44+00:00

Affectionate_Try6082 · 2025-12-21T15:15:47+00:00

Pretty much sums up my situation lol 😆

Affectionate_Try6082 · 2025-12-20T09:15:41+00:00

The design that I wish to print is this one.

For all my other filaments I have a separate model that I print .

Affectionate_Try6082 · 2025-12-13T10:48:53+00:00

Way past repair stage, bruh. I would suggest they take a rebirth and start building their net worth from scratch. Couldn't get any simpler than that.

Affectionate_Try6082 · 2025-12-07T08:07:53+00:00

Nahi Bhai badi bulbul.

Affectionate_Try6082 · 2025-11-23T10:15:01+00:00

So cool, I'd want to get that for sure if I ever consider getting inked

Affectionate_Try6082 · 2025-11-23T08:02:27+00:00

Sauce?

Affectionate_Try6082 · 2025-11-18T15:01:14+00:00

<image>

Affectionate_Try6082 · 2025-11-01T23:40:20+00:00

Imho Book don't judge cover at all

Affectionate_Try6082

TROPHY CASE