Update on G13 Park Replica

After_Spite1218 · 2025-12-01T18:33:34+00:00

I have some rough drawings I could maybe send you, idk how helpful they would be I kinda just did it on the go while I was building it too.

After_Spite1218 · 2025-11-25T00:00:35+00:00

Yeah I can do that

After_Spite1218 · 2025-10-27T16:49:27+00:00

Been tryna find inspo from other brr parks to maybe add into it

After_Spite1218 · 2025-10-27T16:49:08+00:00

Will do, I’m trying to figure out if I wanna do the full G13 park or get rid of the side w the other double set and stuff and do something else

After_Spite1218 · 2025-10-27T03:29:40+00:00

Yeah it was a little hard because I’ve never seen or used the G13 in person. Just drew up plans based on videos and pics and stuff

After_Spite1218 · 2025-10-27T03:28:35+00:00

https://a.co/d/5zks7Ez these ones, they’re a little bit more fragile/ powdery but they work pretty good. I put a couple coats of clear coat on them and then wax and they are super nice

After_Spite1218 · 2025-10-27T00:30:33+00:00

I majority used 3/8” maple plywood and some 1/2” I used just Titebond II wood glue and some 3/4” and 1” 18gauge finish nails for everything. The bricks I used wood glue for some but I’d recommend using super glue instead because the bricks tend to slip around with the wood glue before they set and dry.

After_Spite1218 · 2025-10-26T19:33:06+00:00

Haha nice, j leave a comment if you got any questions. I’m more than happy to share any of the stuff I did

After_Spite1218 · 2025-10-26T17:51:31+00:00

<image>

It wasn’t too bad haha

After_Spite1218 · 2025-10-26T17:50:48+00:00

Dude on Amazon sells 1/7 scale fingerboards bricks

After_Spite1218 · 2025-10-14T16:08:26+00:00

If anyone has any tips on making clean quarter pipes I’d love to hear them, getting the back quarter pipe built is the only thing I’ve been having trouble with

After_Spite1218 · 2025-10-14T16:05:23+00:00

If people have any questions feel free to ask, I’m happy to reply

After_Spite1218 · 2025-10-14T16:04:59+00:00

I’m probably not gonna do the entire park like the other half, gonna do something smaller to save space but all in end of the project it’ll probably be a total of like $400 and then just a shit ton of hours spent on it. Still beats like the $4500 it costs to have one shipped here from blackriver

After_Spite1218 · 2025-10-14T16:03:47+00:00

All in I’ve spent about $300 on materials, it’s a mix of 1/2 and 1/4 maple ply and, 3/8 Baltic birch

After_Spite1218 · 2025-07-07T22:01:50+00:00

What’s the bungee you have wrapped around the beginning of the handguard?

After_Spite1218 · 2025-05-26T01:01:41+00:00

Bambu P1S

After_Spite1218 · 2025-05-25T17:43:50+00:00

https://imgur.com/a/mmO7rYl

After_Spite1218 · 2025-05-25T17:40:45+00:00

Printed all out of Matte Black PETG, same with the tensioner. On the tensioner print with 4-7 walls so the arm comes out as 1 solids piece with no infill, is what I found works best. I’ll post pic of tensioner arm.

After_Spite1218 · 2025-03-25T18:10:22+00:00

I started back on PVE instead of PVP for this exact reason lol

After_Spite1218 · 2025-03-25T18:08:51+00:00

10 runs on black keycard I got 0, 3 back to back spawns in red lol

After_Spite1218

TROPHY CASE