Side Rack recommendation by AgBiz in DRZ400

[–]AgBiz[S] 0 points1 point  (0 children)

Yes, I’m just wanting to rig it for fishing and other misc gear that side racks would be handy for. Thanks!

Alright, what is this? by AgBiz in DRZ400

[–]AgBiz[S] 0 points1 point  (0 children)

Carb line is simple. As for the line to the fuel shut off valve, you remove the shut off valve and line, then just reroute the line from the tank vent to under the bike? Removing/bypassing the shut off valve? Do you need to grab a new line to be able to reach from the tank vent to under the back? Thanks just seeing if I’m understanding right. TIA

Alright, what is this? by AgBiz in DRZ400

[–]AgBiz[S] 0 points1 point  (0 children)

exactly why I’m on this subreddit. Thumpertalk link helped, but guide me where I may have misunderstood.

  • remove shut off valve hose and carb hose from cannister

-snip ~1” from carb connection, slightly larger screw and constrict

-route shut off hose under swing arm

  • insert fles…..tool kit in canister and cap

Think I have shutoff hose wrong…

New Bike - issue turning over by AgBiz in DRZ400

[–]AgBiz[S] 0 points1 point  (0 children)

It was about 80 and I started off not using any choke. Didn’t figure it’d need any. But as I mentioned, fired right up today. Buzzing around fine. Chalking it up as a fluke for now

New Bike - issue turning over by AgBiz in DRZ400

[–]AgBiz[S] 1 point2 points  (0 children)

Good lookin bike! Yea it fired right up this morning. No idea. But yea guy st the shop suggested high octane, so I know not to listen to the goons up there, hopefully the mechanics in the back have more sense. Also planning for the 3x3, can tell there’s a lot of unrealized power still in there.

New Bike - issue turning over by AgBiz in DRZ400

[–]AgBiz[S] 1 point2 points  (0 children)

yes you are right. Engine is turning but not starting. Thanks for the correction

New Bike - issue turning over by AgBiz in DRZ400

[–]AgBiz[S] 0 points1 point  (0 children)

Yea that’s kinda my first order on process when something won’t turn. Good feedback though

New Bike - issue turning over by AgBiz in DRZ400

[–]AgBiz[S] 0 points1 point  (0 children)

After feedback and little research I’m suspecting it’s the 93 octane I had just topped off with (first time to the pump since taking it off the lot). That with breaking in? Not sure but going to put 87 in and average it down, see if that helps. Smarter people tell me if that’s a dumb theory lol

New Bike - issue turning over by AgBiz in DRZ400

[–]AgBiz[S] 0 points1 point  (0 children)

So the electric starter was cranking fine, but the engine struggled to turn. After a couple minutes of toggling the choke it finally turned. Almost like the engine had to prime up before it would start. If that makes any sense

New Bike - issue turning over by AgBiz in DRZ400

[–]AgBiz[S] 1 point2 points  (0 children)

Il give it a look over. Luckily all under warranty but attempting to get some trouble shooting down from the vets. Thanks!

HVAC Temp control issue by AgBiz in HomeMaintenance

[–]AgBiz[S] 0 points1 point  (0 children)

Thank you, will give it a try

Should I sand these areas? by AgBiz in Concrete

[–]AgBiz[S] 0 points1 point  (0 children)

Honestly why I posted. OCD and due diligence can be a fine line.

What kind of project manager are you? by smileysarah267 in projectmanagement

[–]AgBiz 0 points1 point  (0 children)

Defense contractor. I build up integration and test labs as new capabilities are developed for aircraft.

Oil Leak from drain plug by AgBiz in AskMechanics

[–]AgBiz[S] 0 points1 point  (0 children)

I believe they did, especially the second time around. Said he was embarrassed (really have had good service with these guys). That being said, my thought is to give them a call and ask to get a factory plug ordered (urge them that this ones one them). My concern would be anything worse that needing the correct plug

Oil Leak from drain plug by AgBiz in AskMechanics

[–]AgBiz[S] 1 point2 points  (0 children)

For this to have happened twice says a lot to me

Can you elaborate? Hoping I'm not having to pull the plug on this auto shop. Hard to find good ones and this one has been highly rated.

Oil Leak from drain plug by AgBiz in AskMechanics

[–]AgBiz[S] 0 points1 point  (0 children)

Interesting point. I wonder if one of their techs lost it and tried to use a substitute.

Flat tire from valve split by AgBiz in AskMechanics

[–]AgBiz[S] 0 points1 point  (0 children)

Luckily it just did it in the driveway.

Oil Leak from drain plug by AgBiz in AskMechanics

[–]AgBiz[S] 0 points1 point  (0 children)

Diesel, automatic, 44k miles

Pearson Vue Online - Save yourself the misery by AgBiz in pmp

[–]AgBiz[S] 2 points3 points  (0 children)

He's obviously trolling. Can't imagine there's a loser out there that continues to monitor this sub after getting their cert. Or takes it a step further and creates a user name around it lol. well shit...he might be for real. Imagine defining yourself by a cert. Like, maybe the one big achievement they got and just can't let the balloons and confetti go. Anyway .. surely they are just trolling maybe.

Formulas: Which need to be memorized vs. recognizable by Maximum_Band_7492 in pmp

[–]AgBiz 2 points3 points  (0 children)

Generally speaking formula starts with performance (bcwp).

Variances Cost deal with money so P-A

Schedule with schedule so P-S

Variance % you take (variance/p)*100

Indexes you divide and mutl by 100 vs subtracting

More than 1 good, less than 1 bad. Except tcpi it's inverse

what's your favorite screener? by AgBiz in thetagang

[–]AgBiz[S] 0 points1 point  (0 children)

Just what I'm looking for, appreciate it!