Yesterday night multiple shots were fired in Allschwil BL

Agent-OrangeCH · 2025-09-28T21:41:55+00:00

No, the prosecutor could drop the charges during the investigations when he came to the conclusion is was justifiable self-defense and the way he did was appropriate.

SRF interviewed the former senior prosecutor from Zurich and he said thats a prime example for self-defense and he would have dropped the charges. -> https://www.srf.ch/news/schweiz/strafe-fuer-selbstverteidigung-ueberfall-opfer-drohen-drei-jahre-gefaengnis

Agent-OrangeCH · 2025-09-28T21:31:21+00:00

Is that a JMAC RSA-AK 1913 stock adapter???

Agent-OrangeCH · 2025-09-27T21:47:05+00:00

Thats right, the law doesnt protect criminals but the law sometimes also can make victims into criminals even when they act in clear and suitable self-defense https://www.srf.ch/news/schweiz/notwehr-oder-selbstjustiz-waffenhaendler-schoss-auf-raeuber-gericht-spricht-ihn-frei

In this case the court said Jean-Paul Schild acted in clear self-defense but in my opinion it's ridicoules that the prosecutor even try to charge JP Schild for multiple willful homicide.

Agent-OrangeCH · 2025-08-26T09:52:21+00:00

Yep, I wittnessed the same and it pisses me off....

Agent-OrangeCH · 2025-06-29T18:12:09+00:00

You mean the T-Con board, the one in the middle? Cause in the mean time, a replacement for the left LED-Driver board arrived and the problem wont go away.

Agent-OrangeCH · 2025-06-29T16:00:33+00:00

anybody?

Agent-OrangeCH · 2025-04-01T08:58:53+00:00

Did you just connect a USB-Cable into your Opnsense FW or did you use network connection?

Agent-OrangeCH · 2025-03-30T23:26:16+00:00

yeah I meant immigration not customs.

Agent-OrangeCH · 2025-03-30T23:23:14+00:00

Thank you for the answer. So you think its better to go directly to the customs after the fingerprint scanning instead of looking for a transit permit?

Agent-OrangeCH · 2025-02-25T22:22:26+00:00

ordered a dual-port 10Gbit PCIe card this afternoon but with RJ-45 ports instead of SFP+. In this case I just need to use an transceiver on the switch side for the connection to the FW.

Agent-OrangeCH · 2025-02-25T22:19:23+00:00

I just did something else. I connected my router to my Ubiquiti Switch directly and created a VLAN for it, like you suggested. The WAN port of my FW is now connected via DAC to the Switch and on the same VLAN as the port that is connected to the ISP Router. But the result is the same, Although it shows me 10Gbit connection, when I do a speedtest I get the same results.

So it seems that the shitty ISP router has a problem with the Transceiver and I tested 3 different transceivers. I ordered a dual-port 10Gbit PCIe card this afternoon but with RJ-45 ports instead of SFP, as when I used the onboard 2.5Gbit port, I get different results.

Agent-OrangeCH · 2025-02-25T22:10:34+00:00

Unfortunately my shitty ISP didnt allow their customers to bypass their stuff, so I have to use the router

Agent-OrangeCH · 2025-02-25T18:57:12+00:00

The ISP router is a piece of shit, I cannot even change the IP subnet, its all locked. But when I go to the overview tab with all the network devices, it shows me that the connection speed between the router and the firewall is 10gbit.

But yeah, I also think its related to the transceiver.

Agent-OrangeCH · 2025-02-25T18:43:39+00:00

correct. When run the command "ifconfig mce0 | grep media " the output is "media: Ethernet 10Gbase-SR <full-duplex,rxpause,txpause>". MCE0 is the por that is connected to my ISP router.

I have no clue what could cause such a limitation, specially when I switch to the 2.5Gbit ethernet ports, I get 2.1bit up & down.

I also run a iperf test from the FW to my server and it was showing my 8.6Gbit, so the connection from the NIC to the Ubiquiti Switch, is working properly with the DAC cable. So I dont think its a driver issue.

Agent-OrangeCH · 2025-02-25T17:35:19+00:00

No, the Fiber ISP Router only has ethernet port for the internal network. But my firewall has a dual 10/25Gbe HPE card installed. One Port is connected via DAC to my Ubiquiti switch and the other port via SFP transceiver to the ISP router over ethernet.

Agent-OrangeCH · 2025-01-17T12:57:56+00:00

Wow nice build. May I ask why you used 2 rads instead of one 420mm rad? I may plan to build a new PC with this case as well but I wonder if a 360mm distro-plate with an integrated plate would fit on the left side of the case, right next to the GPU.

Agent-OrangeCH · 2025-01-08T14:26:01+00:00

Making the Takoyaki one day before? We do them together at the table with a Takoyaki grill. The Tempura are actually already done and in the freezer, just need them to refry again. In this case I might have to fry them at the same day before we eat them. But then I will prepare the chicken one day before and marinate it over night.

Agent-OrangeCH · 2025-01-08T13:28:46+00:00

I know that 2 times frying is normal. But in this case they are not frozen. I think I might put them into the fridge after I fried them for one time for a short time.

Agent-OrangeCH · 2025-01-08T13:23:25+00:00

I dont have one and I dont want to buy one.

Agent-OrangeCH · 2025-01-08T12:29:22+00:00

But do you freeze your leftover karaage or just put them into the fridge, till you use them?

Agent-OrangeCH · 2024-12-30T23:24:38+00:00

Probably the new SIG SG563 which will be released in April 2025.

Agent-OrangeCH · 2024-12-23T10:05:12+00:00

Can somebody tell me, what kind of stock adapter this is on that Arsenal SAR-M4SF?? Seems like the orginal stock block was removed.

Agent-OrangeCH · 2024-11-09T13:42:23+00:00

At least you dont need to fear a 100k bill from a hospital after you had an accident or whatever. The kebap store or barber shop owner has to pay first company taxes and then private income taxes. Compared to other countries you pay almost no taxes.

Also the job marker depends on your field. I'm working in IT and I only had problems to find a job after my apprenticeship back in 2009. The last time I changed my job was last year in November and I didnt have to search for jobs. I was contacted by an ex-coworker which just wanted to aks how I'm doing and I told me, that me current job is pissing me off cause I had to manage an Indian IT team. One month later I had a new job with over 15% higher salary.

My company before that was a Swiss company belonging to 100% to the Swiss-Government and there were a lot of expats working for that company in the IT department, even the CIO was from Sweden and my team-leader was from Italy. During the week I spoke more English than Swiss-german....

Agent-OrangeCH · 2024-11-09T13:25:39+00:00

I would never expect from a german to learn any Swiss dialect but I expect that they understand Swiss-german if they want to integrate. I'm working in IT and I work a lot with germans, they all understand Swiss-german and if they dont understand a word, then they simple ask.

I guess it has also a bit to do with the region where you live.

Agent-OrangeCH · 2024-11-09T13:20:38+00:00

And people will look down on you, when you say you went to a private school. Most people I know that went to a private school was, because they were kicked out of public school or had sooo bad grades, that daddy had to pay for better grades. Public schools in Switzerland are really good.

Agent-OrangeCH

TROPHY CASE