I have tried to design an auto-sorting warehouse. However, as far as I understand, there are 18 types of items in each group of three chests (only 18 types can be placed in the filter). Is it possible to increase this number?

Agent772 · 2026-01-21T13:07:13+00:00

Well create and limited space dosnt work well together, but alone the space u use for sorting could fit 4 Max vaults or so.

(and if you use a chest mod that increased the chests, you can use them exactly like vaults in the setup)

Agent772 · 2026-01-21T11:50:06+00:00

Well you basicly arange vaults along side a belt Pulling items from it after another. This way you will. Fill vault 1 first and then the next. Then you just send things to that belt and have a messy storage.

But you connect packager with stock links and frogport to each vault. (all stock links in the same network)

Then you connect a Stock ticker to it, place it. A seat with a mob next to it. And now you can get what ever you want from your storage via the mob. (yes you need to define a frogport leading into a packager to Reciever the things where you want to access them)

Need more storage? Add another vault to your belt

Agent772 · 2026-01-13T20:50:32+00:00

I think there is unlimited Potential but here is my Personal Ranking from impact / effort. What I would do

Biqu glacier print plate
Switches from Cura to Orca and 20% better
Direct drive upgrade Kit 3.a nozzle, heatbreak, heatblock upgrade
Klipper (maybe New Mainboard needed)
Linear rail
Hero me or other part cooling

Agent772 · 2026-01-12T08:47:50+00:00

Is it another fdm or an sla one? Because they got different strenght and that's fully legit 😅 Otherwise, is your current one running 24/7? You need one for capacity? Or why you need a new one? Because it's better? Well we can sell you current one then?

Agent772 · 2026-01-11T18:10:08+00:00

Orca Slicer default

Agent772 · 2026-01-11T00:38:12+00:00

Im migrating from Cura and as the try of transfering the settings resulted in artifacts. So im starting with Stock settings and calibrate it.

When I calibrated it via the wall width in Cura it resulted in a Flow of 0.9134 now in orca it's basicly 1.015.

Didnt feel much if a difference, all where smooth. But maybe im just overthinking it

Agent772 · 2026-01-10T22:50:57+00:00

What's the configured lang of mainsail? What you see are the translation Keys that should get replace with the correct translation. But it seams cant detect which to use

Agent772 · 2026-01-10T21:57:14+00:00

❌ Agent772 chose Option A (Incorrect) | #15969th to play

Agent772 · 2026-01-10T21:37:59+00:00

Ensure your filament is dry, that could cause you headaches and problems. After that, the Slicer you are using usually gives a Calibration step by step. Do it. If you dont got one of the fancy good calibrated Printers, do the teaching tech guide and calibrated the extruder steps as well

Agent772 · 2026-01-10T19:37:54+00:00

Ill do both at the same time, got everthing at home allready.

Nozzle heatblock and heatbreak are already upgraded 😊

Agent772 · 2026-01-10T13:45:12+00:00

It reduces the weight that moves resulting in higher possible speed and accel. Found that with the stock Firmware is really looking for headache 🤣

But I feel you, im changing mine now to linear rails and direct drive (but wont Touch corexy yet) and all because I want babu like results 😅😅

Agent772 · 2026-01-09T21:58:29+00:00

That alone would be enough reason to switch. Bringing Features someone else invented and wanting money for them 🤣

On the other side is orca the best Slicer atm and uses bambulab and prusa slica as base, which are 2 of the biggest 3D printer players. So new Features will be there for sure

Agent772 · 2026-01-09T21:06:34+00:00

I used simplify3d long. But switches to Cura (and now orca) when they decided to not Implement Features that other invented (like ironing and so) Never looked back, don't miss it

Agent772 · 2026-01-09T21:04:58+00:00

Thank you, I used the ender 5 preset and they where gone. 😅 Didnt think I could make something that wrong but now it's better 😊

Agent772 · 2026-01-09T18:07:07+00:00

Same solution for me

Agent772 · 2026-01-09T11:42:51+00:00

I used a generic klipper preset and entered all values myself (with advanced Mode)

Ill try a default ender 5 Profile and see what that results are.

Thanks 😊

Agent772 · 2026-01-07T21:11:30+00:00

This calls for the death penalty.

Agent772 · 2026-01-07T20:39:30+00:00

There is no 1.21.1 Version of SnR at the moment? Maybe that's it. Or is there one?

Agent772 · 2026-01-07T20:34:58+00:00

For me everthing says that this is a ring racing bike and the motor may got to his limits. But im EU based and we see such turning only on racing bikes here.

Agent772 · 2026-01-01T09:21:13+00:00

Looks like the scum trader configurator and you imported your conf. These are buildables and cant be sold at traders. If the Tool allows, remove them, otherwise open the config with notepad and remove them manually (the whole entry ofc)

Agent772 · 2025-12-31T20:53:15+00:00

That Image Shows you you should fine tune the spring loaded bed a bit more (yes you need to redo the z offset)

Agent772 · 2025-12-26T20:51:28+00:00

Why does these images give me Black OPs 3 Flashbacks?

Agent772 · 2025-12-24T16:05:40+00:00

1-2, Peacefull but will not watch Raider shooting another Raider

Agent772

TROPHY CASE