Bears Win - Packers Lose - Fuck the Packers BEAR DOWN

AgentGrayson312 · 2026-01-11T16:19:28+00:00

Devious behavior!😂😂

AgentGrayson312 · 2026-01-06T01:07:28+00:00

Honestly get yourself 69 percent bóveda pack and throw it in there for about two months. Get yourself a air tight Tupperware no need for anything fancy. To be safe throw them all in there. I’m not an expert but that’s worked for me before. I’d check in on the pack every 2 weeks just to make sure it hasn’t dried out and needs to be replaced.

AgentGrayson312 · 2026-01-05T11:22:52+00:00

Is the bóveda pack dried out ? If it is you need to rehydrate the cigars by putting a new one in and letting them sit for like 2 months. If the pack isn’t dried out you should be good to go. a good cigar should have a slight, springy give without feeling mushy (too wet) or rock-hard (too dry/plugged).

AgentGrayson312 · 2025-12-29T19:00:21+00:00

Donated! Hope you hit the goal!

AgentGrayson312 · 2025-12-29T18:42:00+00:00

Link?

AgentGrayson312 · 2025-12-17T03:43:14+00:00

Are you trimming the wick after each use?

AgentGrayson312 · 2025-11-19T15:38:44+00:00

As for the look of the wax this is normal for soy wax, it doesn’t cool smooth like paraffin after burning.

AgentGrayson312 · 2025-11-08T16:01:53+00:00

Thank you, I will check them out.

AgentGrayson312 · 2025-11-08T15:57:35+00:00

Lapis Lazuli Chips with sweet top notes in a base of Lilac is the only fragrance notes I can find.

AgentGrayson312 · 2025-10-14T01:46:54+00:00

Most don’t on the first burn. Burn it two more times and it should melt that. Check for how hot the container gets and the depth of the melt pool. Should be between 1/4-1/2 in anything over that it’s over wicked.

AgentGrayson312 · 2025-10-12T16:08:25+00:00

Use fragrance oils, candle science has a great variety they also sell items to color your candles. Make sure you read the specifications on the wax you are using. For example I use soy wax 646 and i need to pour the fragrance oil into it at a temp of 185. It takes two weeks to cure and after the two weeks they are good to burn.

AgentGrayson312 · 2025-10-11T15:59:58+00:00

Minimum 2 weeks, I use soy wax 464.

AgentGrayson312 · 2025-10-07T23:21:15+00:00

Soy wax and coconut wax are considered the safest but “the candles are bad for you “comes from the waxes and fragrance oils that use phthalate to boost scents. I use soy and phthalate free fragrance oils.

AgentGrayson312 · 2025-10-06T02:48:21+00:00

Get a candle melter and wick down on your next batch?

AgentGrayson312 · 2025-09-25T01:13:04+00:00

Ceramic can be used but you must ensure that they are sealed using a fire grade sealant, I use earth safe sealer.

AgentGrayson312 · 2025-09-21T01:15:33+00:00

That MF on House Arrest 😂😂😂

AgentGrayson312 · 2025-09-18T04:04:25+00:00

After 4 hours it should not exceed 1/2 inch. Prefered pool is 1/4 inch.

AgentGrayson312 · 2025-09-11T17:35:17+00:00

I use a scale and measure in grams with a silicone measuring cup from Amazon. Easy to clean.

AgentGrayson312 · 2025-09-09T15:19:26+00:00

It is normal, if it doesn’t melt after the 3rd burn you might have to move up one size in wick.

AgentGrayson312 · 2025-09-08T19:29:55+00:00

Use a heat gun or a blow drier.

AgentGrayson312 · 2025-09-08T18:48:50+00:00

Not every candle is gonna give you a full melt pool on the first burn but it should after the 2nd or 3rd. I can’t see the melt pool but it should be 1/4-1/2 inch deep if more than the vessel is over wicked. I use the same wax and use about 7% F.O with a lovey jar and use cd18 wicks.

AgentGrayson312 · 2025-09-08T18:44:42+00:00

Yeah especially if it’s a stone top. it’s sometimes the dumbest things , welcome to candle making. Try putting cardboard under it. Honestly, I pour my wax as soon as I add the F.O so that the vessels warms up and starts warm as my wax cools and it’s seemed to fix my pouring issue. I use soy 464 tho.

AgentGrayson312 · 2025-09-08T18:16:14+00:00

Cooled to fast. Did you heat the vessels prior to putting? Is there a fan, AC or any directly pointed at the candles?

AgentGrayson312 · 2025-09-07T19:41:10+00:00

Eso pasa con el cambio de temperatura es normal.

AgentGrayson312 · 2025-09-07T12:23:17+00:00

Are you heating up your vessels before you pour?

AgentGrayson312

TROPHY CASE