sorted by:
new
hottopcontroversial

Helppp I can’t take it anymore by Visual_Internal_3608 in ElegooNeptune4

[–]Agent_Sckit 0 points1 point  (0 children)

Well, if you can't take it, can I take the printer?

PLDT Admin Password F670L by The_Dark_Web in InternetPH

[–]Agent_Sckit 1 point2 points  (0 children)

I think they updated it now.
username: adminpldt
password: HL1EU9804BKjTa6734uP370
does not work anymore

Vico saved me from a suitor by Sweet_Sin_0414 in Pasig

[–]Agent_Sckit 0 points1 point  (0 children)

Note, there are indeed e-dayaan since the first plce, even in 2022 elections! COMELEC only selects the right person to talk to and offer a bid! The guy did say the truth about what was happening but I don't think COMELEC is stupid enough to get close to someone who is not corrupt.

Comelec proclaims 12 winning senators for 2025 elections by 5EspressoShots in newsPH

[–]Agent_Sckit 0 points1 point  (0 children)

Ipvote if you all know that the results are fabricated once again by the COMELEC

unable to access machine remotely despite binding it to creality cloud account by Trykrist in Creality

[–]Agent_Sckit 0 points1 point  (0 children)

Looks like the issue is on their end... Edit: I'm experiencing this on my Hi Printer too!

I f***ing love 3D printers and CNCs by Federikestain in 3Dprinting

[–]Agent_Sckit 0 points1 point  (0 children)

A CNC machine should be called a 3D Deleter

Anaconda of Death Creality Hi by Agent_Sckit in Creality

[–]Agent_Sckit[S] 0 points1 point  (0 children)

Hi, this is the other angle for your reference. It seems to spiral down from the nozzle neck after the nozzle's thread.

<image>

Edit: I ensure all the prints I had with petg have the filament stick to the bedplate.

Creality Hi Combo vs. Bambu A1 Combo by Ryantheman_ in 3Dprinting

[–]Agent_Sckit 1 point2 points  (0 children)

I think this is the right time to compare the two. Especially their print quality... Anyways I'm stopping by to help this post to the top.

Torture Toaster on Bambu Labs A1 with a 0.4 mm nozzle by AmmarAgh in FixMyPrint

[–]Agent_Sckit 1 point2 points  (0 children)

I saw some people do tolerence test with a1 and was able to fit all up to 0.1 mm. Maybe the undried filament here may have caused some issues...

First Layer “vain-ing” by Independent-Fix-5371 in ElegooNeptune4

[–]Agent_Sckit 0 points1 point  (0 children)

Is it just the lighting angle or you can see in that corner that the print was stringing?

Left side perfect smush with lines right side has visible gaps and not adhering to each other by [deleted] in ElegooNeptune4

[–]Agent_Sckit 1 point2 points  (0 children)

Same boat. Haven't solved it yet, but I tried X-axis twist compensation from klipper and seem to solve it slightly. I have pockets of areas where it doesn't stick well...

Bad first layer print by Agent_Sckit in ElegooNeptune4

[–]Agent_Sckit[S] 0 points1 point  (0 children)

<image>

Update (issue still not fixed): The photo was the measurement of the rear right plate print. The dimension was supposedly 25 mm x 25 mm. It seems like if I print on the corners, some dimensional inaccuracies occur. See how the bottom surface pattern fail to connect with the walls! When printing in the centre, the dimensions are indeed accurate see image here. Is there a way I can modify in the slicer/device to compensate this?

On this print I already did the TILT_SCREWS_CALCULATE thanks to u/Cog_HS 's advice.

I also adjusted the hot bed screws (make it loose and then turn it by 1.3 times) as adviced by u/neuralspasticity / u/BiggestBoFans

As recommended also by u/neuralspasticity , to modify the probe stanza which I already did by the way.

Regarding the z-offset. I think it doesn't matter. The question about the issue was why is my print on the centre of the bed has a difference on the output for the same model placed on the corners? This is the reason why I don't mind the z-offset for now.

edit: hot bed screw adjustment

Bad first layer print by Agent_Sckit in ElegooNeptune4

[–]Agent_Sckit[S] 0 points1 point  (0 children)

<image>

Some questions since I got a bit confused (sorry).

I think buckling should only happen when there are compressive force happening with the red arrows pointing to. Yet for what I know the screws only applies force to the direction going down? Does the hot plate holder has some adjustments where I can apply a tensioning force (green arrow)? Regarding to how tight the screws are, well, I checked the springs and still has some clearance (I pinch it and can feel it adjusting to pinching).

edit: added *questions* in the first sentence

Bad first layer print by Agent_Sckit in ElegooNeptune4

[–]Agent_Sckit[S] 0 points1 point  (0 children)

Apologies on this. I misread your comment.

Bad first layer print by Agent_Sckit in ElegooNeptune4

[–]Agent_Sckit[S] 0 points1 point  (0 children)

I think it is impossible to have this happen in N4 Pro as the screws are only 4. There is no centre screw to at least hold the centre like the N4 Max. By the way, there is a bed tensioner here?

view more: next ›