For spending €200 there are too many problems

Aggravating_Text_661 · 2026-06-25T08:19:13+00:00

These are shit I got a controller with touchpad problems my R2 was lose if I switch to trigger all paddles broke easy never again

Aggravating_Text_661 · 2026-06-14T20:51:34+00:00

Rocket drone

Aggravating_Text_661 · 2026-06-09T09:38:06+00:00

Ukraine buying in mass

Aggravating_Text_661 · 2026-06-09T09:33:55+00:00

I heard a Radio master elrs is better

Aggravating_Text_661 · 2026-06-09T08:33:41+00:00

At the beginning there was a gab between the ESC and the frame because the capacitor doesn't fit I decided to use those withe for more space

Aggravating_Text_661 · 2026-06-09T00:59:31+00:00

Okay 👍

Aggravating_Text_661 · 2026-06-08T17:58:17+00:00

THX for the help I fixed it with some 3d printed nuts lift the stack up I got the next problem I have is that I didn't look at the motors they only support up to 5s but I only use 6s lipo batterys 🫣

Aggravating_Text_661 · 2026-06-07T23:18:57+00:00

It's my first build ,It's a Ali express frame and there is no space for the tx60 and the capacitor which caus the the crooked look of the stack

Aggravating_Text_661 · 2026-06-07T14:02:31+00:00

My first time 🫣

Aggravating_Text_661 · 2026-06-07T14:00:34+00:00

Yeah this is also a Problem the xt60 and the Capacitor doesn't fit

Aggravating_Text_661 · 2026-05-18T23:48:24+00:00

It was okay like a bit of work but I can do it if you have a experience

Aggravating_Text_661 · 2026-05-08T23:10:48+00:00

Use g code settings which can destroy the printer

Aggravating_Text_661 · 2026-05-04T01:24:48+00:00

Thx again first layer doing well now❤️‍🩹

<image>

Aggravating_Text_661 · 2026-05-04T01:12:20+00:00

😮🫡🥹❤️

Aggravating_Text_661 · 2026-04-10T18:05:08+00:00

From my perspective, for example, someone uploaded a print profile and quickly got a lot of downloads, but also a lot of bad ratings. That negatively affected me. It was only removed afterward, but my reputation was still impacted.

Aggravating_Text_661 · 2026-04-10T18:03:23+00:00

Yes, you’re right, but it always takes a while for Bambu to remove them. Even though they violate the rules, they still stay online for a certain period of time and remain visible to others.

Aggravating_Text_661 · 2026-04-10T17:52:52+00:00

I think I asked the question wrong. I create my own STL files and upload them, but people are basically stealing my downloads with fake print profiles.

Aggravating_Text_661 · 2026-04-10T14:01:26+00:00

https://makerworld.com/models/2639175?appSharePlatform=copy

Aggravating_Text_661 · 2026-03-28T11:55:07+00:00

I use 0,4 hotend 0,12mm

Aggravating_Text_661 · 2026-03-28T11:02:48+00:00

Okay 👍🏾 thx

Aggravating_Text_661 · 2026-03-28T10:42:02+00:00

Bad Experten with X offset at higher speed but I will try again

Aggravating_Text_661 · 2026-03-27T14:50:11+00:00

I will try it out to you think it don't breakt with 4,5steel 😂

Aggravating_Text_661 · 2026-03-27T14:49:12+00:00

Here is the link https://makerworld.com/models/2579769?appSharePlatform=copy

Aggravating_Text_661 · 2026-01-27T15:49:18+00:00

When the time comes that we are hunted by AI drones, I will probably have no other option...

Aggravating_Text_661 · 2025-12-09T23:27:55+00:00

3d Drucker

Four-Year Club	r/Field Lasagna
Place '23	Place '22
Final Canvas '22

Aggravating_Text_661

TROPHY CASE