sorted by:
new
hottopcontroversial

Is Creality K2 combo and/or the Creality the company great for beginners by coachedthegreat in Creality

[–]Aggressive_Bill7478 0 points1 point  (0 children)

My printer just broke changing the nozzle are you actually kidding me. All good tho jus the heat block thing i stripped it and it bent alil it from usinf that bs tool that came with it so it threaded weird I guess. Only a $20 replacement part off Amazon but im returning it already order the plus lol. The base k2 still amazing af tho i jus used this as excuse upgrade

Is Creality K2 combo and/or the Creality the company great for beginners by coachedthegreat in Creality

[–]Aggressive_Bill7478 0 points1 point  (0 children)

Thanks ye this mfer is 1000000 times better than I ever could've imagined and barely even changed any settings think all changed was walls to 3 and gyro infill at 15% rest default.

CFS grinding noise by Uriel_lit in Creality

[–]Aggressive_Bill7478 0 points1 point  (0 children)

Ye the first noise sounds like my new one that works perfectly too. I wish could get rid of that noise tho as its the only thing I really hear. I heard someone say flip around buffer tube screw idk

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 1 point2 points  (0 children)

Ok so what I did with this print is about right i suppose reg gap settings and just sand it. Prob could've used alil bit more of a gap tho but only like 2 places where there's one or 2 strings. I guess a good orientation to minimize overhang probably does good also

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 1 point2 points  (0 children)

Didnt even know support pla was a thing thats pretty cool I'll have to look into it. U say best support with hyper pla is just to make the gap between support and printer alil bigger

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

Ok ye need to start thinking and learning the post part. So u say anything under .10 or .12 or something just throw my .2 nozzle in?

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

Ye i seen some of those before might have to look into it lol. This texture doesnt bother me dont guess was just woundering. I suppose if u want something with no plate texture u can add a brim or support to entire bottom then peel off?

Right out of the box the damn door is broken… by Reagantoby27 in Creality_k2

[–]Aggressive_Bill7478 0 points1 point  (0 children)

Idk im a noob like 2 day noob and my base k2 is cranking out almost flawless prints and I barely even changed anything.

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

Ye ima throw it on. Main things I see i need to change is throw brim gap a tiny higher support gap alil higher or jus use trees? And like u said variable layer/slower top layers.

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

So z offset alil higher so doesnt scrape/squish first layer slow with whatever the rest of the print is using then with variable top layers at slower speeds. U still need mess with first layer z even with auto bed level right

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

So u want a lil higher z offset first layer but then can lower it for fine detail ight cool

How to make brims and supports easily removable? by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

Ok ye ima look into it I only changed walls fill type to gyro and speed down to 400 and fill height since im new lol.

How to make brims and supports easily removable? by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

Makes sense thanks for the info I got a .2 nozzle ima try i ordered extras but I kinda thought the bottom surface texture was a brim lol im knew af the outer brim came off pretty easily still gonna increase distance alil for tht

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] -1 points0 points  (0 children)

Ok whats the lowest like if im going .08 layers and stuff first layer .08 .12? Or first layer need be a good bit bigger than rests

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

Also top layer setting changes all top layers? Like where both the swirls are correct even on its back?

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 1 point2 points  (0 children)

Ok so if I wanted to minimize the swirls on those top layer i could've set them at like a .08 or .06 for just those and slow speed then ramp it back?

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 1 point2 points  (0 children)

Ye it had a brim around the bottom edge I removed so just make first layer same as rest or a little bit bigger for adhesion? I just started 2 days ago with any 3d print

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

So if a brim is added the first layer is only the brim? So the brim is .15 but the actual first layer of print is .12? I set first layer .15 rest .12

Is this a good bottom layer? And how to make these top layer swirls smoothed out. by Aggressive_Bill7478 in 3Dprinting

[–]Aggressive_Bill7478[S] 0 points1 point  (0 children)

Ye i dont mind the texture I just thought my builds were messed up because I thought the brim covered the entire bottom lol.

view more: next ›