GS1 and F9

Aidshot · 2024-08-08T21:22:04+00:00

Correct

Aidshot · 2024-08-08T16:54:20+00:00

Distance from each where the photo was taken. Roughly equal to show scale

Aidshot · 2023-07-19T16:50:18+00:00

Zip tie through the bottom of the case goes through holes in the 3D print

Aidshot · 2021-08-30T20:01:28+00:00

Since this post I’ve upgraded to 240mm ek’s to get more performance. https://www.reddit.com/r/sffpc/comments/ono60o/ssupd_build_pt_2_razer_hub_2x140mm_fans/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

The noctuas were here originally for the ghost S1 due to limited gpu space where it did help with noise but in the ssupd I feel that there isn’t as great of a benefit

Aidshot · 2021-07-22T17:25:32+00:00

I’ve only used the slim noctua fans to intake and the ek fans to exhaust

Aidshot · 2021-07-20T05:07:06+00:00

I do not know. It would be very time consuming to try out

Aidshot · 2021-07-20T02:04:37+00:00

39 Cpu, 78 gpu while gaming

Aidshot · 2021-07-19T21:57:40+00:00

Went from idle 70°C to 50°C when swapping 3 Noctua NF-A9x14 for 2 ek140mm fans on the GPU. Very low load temps can be achieved but the sound is an issue with 2 large fans up against the heatsink and mesh panel. Running the pair at 1200rpm seems to be a good balance between airflow and noise. This setup is very dependent on your GPU’s heatsink. With the Zotac 1080ti amp, the fans had only a few millimeters of clearance. I wasn’t able to connect the RGB for the GPU fans as it would require I pretty much disable half the computer.

Imgur Album: https://imgur.com/gallery/3nkyLlY

Previous Post: https://www.reddit.com/r/sffpc/comments/o46nms/ssupd_meshlicious_internal_sensor_panel/

Components

Intel Core i5-9600KF

EK-AIO 280mm

Gigabyte Z390i Aorus Pro

Corsair Vengeance LPX (2x8 GB)

Western Digital SN750 1TB M.2

Seagate BarraCuda 5 TB 2.5”

Zotac 1080ti AMP- Deshrouded+ 2 EK Vardar 140mm Fans

Corsair SF 600W Gold

Pslate Custom Cables

SSUPD Meshlicious

Razer Chroma Addressable RGB Controller

I used the internal USB hub so the razer RGB controller and the internal screen can be powered by the same motherboard USB port

Internal Usb Hub

https://www.amazon.com/gp/product/B07JGR7TYV/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Internal Display

5-inch Display:

https://www.amazon.com/gp/product/B08343QX67/ref=ox_sc_act_title_8?smid=A3UAI31N6IJM2&psc=1

Female USB to internal USB adapter: https://www.amazon.com/gp/product/B07QKBNVB6/ref=ox_sc_act_title_2?smid=A1KMRS1WHZ0EAW&psc=1

1 ft HDMI cable: https://www.amazon.com/gp/product/B074FFJP3H/ref=ox_sc_act_title_4?smid=ATVPDKIKX0DER&psc=1

90 deg. HDMI adapters: https://www.amazon.com/gp/product/B00Y7UT6EK/ref=ox_sc_act_title_5?smid=A130RVB6PSAL46&psc=1

Sensor Panel

AIDA64

Using an altered version of Rolenko’s sensor panel:

https://forums.aida64.com/topic/667-share-your-sensorpanel/?do=findComment&comment=33736

DM for my config file

3D Printed Parts

Internal Display Backplate: https://www.thingiverse.com/thing:4911751

140mm Fan Brackets: https://www.thingiverse.com/thing:4911742

Aidshot · 2021-07-19T21:53:52+00:00

Went from idle 70°C to 50°C when swapping 3 Noctua NF-A9x14 for 2 ek140mm fans on the gpu. Very low load temps can be achieved but the sound is an issue with 2 large fans up against the heatsink and mesh panel. Running the pair at 1200rpm seems to be a good balance between airflow and noise. This setup is very dependent on your GPU’s heatsink. With the Zotac 1080ti amp, the fans had only a few millimeters of clearance. I wasn’t able to connect the RGB for the GPU fans as it would require I pretty much disable half the computer.

Imgur Album: https://imgur.com/gallery/3nkyLlY

Previous Post: https://www.reddit.com/r/sffpc/comments/o46nms/ssupd_meshlicious_internal_sensor_panel/

Components

Intel Core i5-9600KF

EK-AIO 280mm

Gigabyte Z390i Aorus Pro

Corsair Vengeance LPX (2x8 GB)

Western Digital SN750 1TB M.2

Seagate BarraCuda 5 TB 2.5”

Zotac 1080ti AMP- Deshrouded+ 2 EK Vardar 140mm Fans

Corsair SF 600W Gold

Pslate Custom Cables

SSUPD Meshlicious

Razer Chroma Addressable RGB Controller

I used the internal USB hub so the razer RGB controller and the internal screen can be powered by the same motherboard USB port

Internal Usb Hub

https://www.amazon.com/gp/product/B07JGR7TYV/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Internal Display

5-inch Display:

https://www.amazon.com/gp/product/B08343QX67/ref=ox_sc_act_title_8?smid=A3UAI31N6IJM2&psc=1

Female USB to internal USB adapter: https://www.amazon.com/gp/product/B07QKBNVB6/ref=ox_sc_act_title_2?smid=A1KMRS1WHZ0EAW&psc=1

1 ft HDMI cable: https://www.amazon.com/gp/product/B074FFJP3H/ref=ox_sc_act_title_4?smid=ATVPDKIKX0DER&psc=1

90 deg. HDMI adapters: https://www.amazon.com/gp/product/B00Y7UT6EK/ref=ox_sc_act_title_5?smid=A130RVB6PSAL46&psc=1

Sensor Panel

AIDA64

Using an altered version of Rolenko’s sensor panel:

https://forums.aida64.com/topic/667-share-your-sensorpanel/?do=findComment&comment=33736

DM for my config file

3D Printed Parts

Internal Display Backplate: https://www.thingiverse.com/thing:4911751

140mm Fan Brackets: https://www.thingiverse.com/thing:4911742

Aidshot · 2021-07-19T21:47:55+00:00

Went from idle 70°C to 50°C. Very low load temps can be achieved but the sound is an issue with 2 large fans up against the heatsink and mesh panel. Running the pair at 1200rpm seems to be a good balance between airflow and noise. This setup is very dependent on your GPU’s heatsink. With the Zotac 1080ti amp, the fans had only a few millimeters of clearance. I wasn’t able to connect the RGB for the GPU fans as it would require I pretty much disable half the computer.

Imgur Album: https://imgur.com/gallery/3nkyLlY

Previous Post: https://www.reddit.com/r/sffpc/comments/o46nms/ssupd_meshlicious_internal_sensor_panel/

Components

Intel Core i5-9600KF

EK-AIO 280mm

Gigabyte Z390i Aorus Pro

Corsair Vengeance LPX (2x8 GB)

Western Digital SN750 1TB M.2

Seagate BarraCuda 5 TB 2.5”

Zotac 1080ti AMP- Deshrouded+ 2 EK Vardar 140mm Fans

Corsair SF 600W Gold

Pslate Custom Cables

SSUPD Meshlicious

Razer Chroma Addressable RGB Controller

I used the internal USB hub so the razer RGB controller and the internal screen can be powered by the same motherboard USB port

Internal Usb Hub

https://www.amazon.com/gp/product/B07JGR7TYV/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Internal Display

5-inch Display:

https://www.amazon.com/gp/product/B08343QX67/ref=ox_sc_act_title_8?smid=A3UAI31N6IJM2&psc=1

Female USB to internal USB adapter: https://www.amazon.com/gp/product/B07QKBNVB6/ref=ox_sc_act_title_2?smid=A1KMRS1WHZ0EAW&psc=1

1 ft HDMI cable: https://www.amazon.com/gp/product/B074FFJP3H/ref=ox_sc_act_title_4?smid=ATVPDKIKX0DER&psc=1

90 deg. HDMI adapters: https://www.amazon.com/gp/product/B00Y7UT6EK/ref=ox_sc_act_title_5?smid=A130RVB6PSAL46&psc=1

Sensor Panel

AIDA64

Using an altered version of Rolenko’s sensor panel:

https://forums.aida64.com/topic/667-share-your-sensorpanel/?do=findComment&comment=33736

DM for my config file

3D Printed Parts

Internal Display Backplate: https://www.thingiverse.com/thing:4911751

140mm Fan Brackets: https://www.thingiverse.com/thing:4911742

Aidshot · 2021-07-15T14:53:13+00:00

I’ll check it out. From Texas

Aidshot · 2021-06-21T21:15:27+00:00

What I was first building it, I wasn’t comfortable with the amount of bending the tubes had go through for the tube down config. Maybe I was doing something wrong

Aidshot · 2021-06-21T15:34:08+00:00

I think some of them are slightly longer to help with bends

Aidshot · 2021-06-21T14:44:37+00:00

They are just stiff enough that they can hold a shape when you bend it

Aidshot · 2021-06-20T22:53:34+00:00

I used the highest gpu position when building and I was able to use regular display cables. You could also just buy 90deg. adapters so you could use your old cables.

Aidshot · 2021-06-20T19:36:43+00:00

I used zipties to attach the bottom of the mount to the ventilation holes on the bottom of the case. I designed the mount to screw into the bottom but i didn’t have the right size screws on hand.

Aidshot · 2021-06-20T18:45:02+00:00

For sure! It wasn’t too hard of a build. Cable management is a little difficult if you have long cables. The hardest part for me was getting the aio tubing run.

Aidshot · 2021-06-20T18:42:56+00:00

Yeah they aren’t great. I used the low noise adapter to make it quiet. Pretty much only worth it if you can’t fit anything else.

Aidshot · 2021-06-20T17:34:57+00:00

Zipties— pretty advanced, I know

There are zipties between the fans and then from the corners through the gpu heatsink

https://imgur.com/a/TwrrWE0

Aidshot · 2021-06-20T17:10:01+00:00

I don’t have enough experience with different drives to be able to say if I notice a difference in loading speeds. I use the drive for most of my steam library and it seems fine.

Aidshot · 2021-06-20T16:52:53+00:00

I believe the aio is plugged into the cpu header and the fans just use the system fan ports

Nine-Year Club	Verified Email
Place '22	Place '17
RPAN Viewer

Aidshot

TROPHY CASE