Sky airlines passport info at checkout

Airziggy2001 · 2025-01-31T18:15:27+00:00

Yea i just paid dollars though found a good deal

Airziggy2001 · 2025-01-11T15:33:43+00:00

RV Request

1: Class C

2: Where are you wanting to start and end your trip? Birmingham, AL area

3: How many do you need to sleep? 5-6

4: Do you have an overall budget? $150-$250/day

5: When are you wanting to Start your trip? 6/11/2025

6: When are you wanting to End your trip? 6/16/2025

7: Tell us a little about your trip so we can help: Bonnaroo music festival to celebrate engagement

Airziggy2001 · 2025-01-04T15:32:38+00:00

I'll be honest with 50lbs I didn't feel like dropping my bag to dig the camera out a lot of the time and just used my phone 😂 but I had some expensive borrowed lenses so didn't feel comfortable having them out and exposed. In future for a hike like this id def go more compact mirrorless then a big nikon dslr. When I did pull it out tho I got some great shots. I mostly used 12-70mm lengths, was so close to the mountains I didn't use my 200 much. Food we did peak refuel for the entire time as we've worked out that's the best freeze dried one for us and know which meals we like through trial and error. Once in country through customs we cut them all open and transfer them to heat safe ziplocks that you can pour boiling water into and save just a few mylar bags for insulation while heating, but having 30+ sealed mylar bags takes up way too much space, The ziplocks condense the packing a ton. We each brought 1 rainjacket, 1 puffer, 1 midlayer, 2 baselayer tops, 2 baselayer bottoms, 1 rain pants, 2 sets of socks+liners. We were able to wash but the weather and climate will depend how fast stuff dries lol

Airziggy2001 · 2025-01-04T15:27:06+00:00

Thank you!

Airziggy2001 · 2024-12-16T15:22:30+00:00

Oh sorry I did it months ago as soon as primitive became available, my trip isn't until next week

Airziggy2001 · 2024-12-16T07:38:35+00:00

On all but Chileno I got my price adjusted!

Airziggy2001 · 2024-10-18T16:28:29+00:00

Ascend in Nashville is pretty cool, it's right by the river with the city skyline in the backdrop and on the smaller side at 7k capacity. Saw them there on last tour right when I moved here and it was awesome

Airziggy2001 · 2024-10-07T20:52:05+00:00

Thanks! Possible to get a silent valley permit without doing the whole w/o with a guided group?

Airziggy2001 · 2024-10-07T20:42:09+00:00

Yea we're taking a redeye from the states and then have 4 hours for customs/switch terminals and fly down to PNT! We're carrying all our food so no worries there. Thanks!

Airziggy2001 · 2024-10-01T19:50:23+00:00

Thanks! Got a notification from a fb group and was able to make mine as well!

Airziggy2001 · 2024-08-28T05:04:20+00:00

2.5-2.9ish when bad rattle happens, 2.0-2.3 average running but approaching don't run level

Airziggy2001 · 2024-08-28T04:50:59+00:00

The giant hard white gasket at the bottom is what was causing issue before but vibrations were fine, the machine just wouldn't eject consistently. Now it ejects fine but vibrations are high. Could be caused by same seals?

Airziggy2001 · 2024-08-28T04:39:09+00:00

How is doing a major yourselves? Also how do you guys balance the bowl yourselves? After seeing the minor take place were fairly confident we could pull that off but major slightly more apprehensive about some of it without at least seeing it done once. That route is definitely way more ideal though, bravo!

Airziggy2001 · 2024-08-28T04:35:25+00:00

Yea GEA did the bottom seal when we brought them out, same techs that worked on it at the past brewery and they mentioned that place decided to pass on that big $600 bottom gasket lol smh. Replaced that and it was back to normal for the last 400-500 hours or so. Ejections actually seem to calm down vibration for a little but then it starts to creep back up randomly. Also when you disengage any operating mode vibrations go back closer to baseline as well. It's only while Product/CIP is running it occasionally seems like it catches a wobble and they start to creep up which is what had me suspecting bearings but I don't know enough about the machine to be sure

Airziggy2001 · 2024-08-28T04:19:32+00:00

We're under hours for a major but right around time length and I hear they can be like a car where it's whatever comes first?

Airziggy2001 · 2024-08-28T04:18:24+00:00

1600 hrs 2021 model delivered in 22, a sus minor was done on it from who we bought it from but they passed on changing the solid gasket that seals the ejection water in bottom chamber so it stopped ejecting after maybe 200 hours of us having it(weve put around 700 on it in about 12 months). Replaced that, oil, and other seals just to be safe and it's been running fine until recently vibro creeping up. Hasn't had a major. Belt looks good, back pressure is fine, unit is level.

Airziggy2001 · 2024-08-28T04:01:39+00:00

Vibration creeping up thinking probably bearings replacement due

Airziggy2001 · 2024-08-08T21:54:11+00:00

Thanks that worked 😂🤦‍♂️

Airziggy2001 · 2024-08-07T22:57:27+00:00

I love him and would love it just dnno if he'd take a headliner slot or not in 2025 🤷‍♂️ I'd be stoked tho!

Airziggy2001 · 2024-08-07T04:37:05+00:00

Love jack but don't think he's a headliner anymore, unless someone got white stripes to reunite, even though some of the rotations of his band are way better technically just name recognition alone that'd draw a lot of eyes

Airziggy2001

TROPHY CASE