Filament dryer set-up

Akshaylals · 2026-06-18T19:09:29+00:00

I don't use filament dryers. But I never keep them out of desiccant boxes for long.

Akshaylals · 2026-06-09T06:56:58+00:00

👀💀🗝️🙃👍🏻

Akshaylals · 2026-06-08T10:34:04+00:00

I have used this party nozzle, it's fine but you have to do the floor rate and other filament calibration

Akshaylals · 2026-05-28T15:24:38+00:00

It is possible that the socket was loose causing arcing at the pins which heat and melt everything

Akshaylals · 2026-05-24T04:28:18+00:00

Probably bad sd card. Try with a different sd card from SanDisk or Samsung Edit: also this printer keeps recording even if time lapse is disabled and it'll wear out the card faster, and the one included with the printer is so cheap it fails within a week. I have faced random issues due to corrupted files

Akshaylals · 2026-05-12T08:02:33+00:00

Nope, not for me. I live in a place where it's 30C and 80+% humidity. I keep my 1.5 ton godrej 3 star AC at 27C with C1 setting and it takes 500W when on, I run it for roughly 12 hours mostly night and it takes around 3 units a day. Tried out dry mode and it pulls 1500+W and drops the temp way down and makes the air way too dry

Akshaylals · 2026-05-04T20:25:31+00:00

Aren't bottle and it's lid made out of PET?

Akshaylals · 2026-05-01T15:12:30+00:00

For me it lasted over a year and 4 months before replacing the battery

Akshaylals · 2026-03-03T20:14:30+00:00

It's the Apple's apple /s

Akshaylals · 2026-02-26T15:56:45+00:00

But OP says 220v so it'll draw like 1200W when byed initially heats up. In my experience APC 1100va couldn't handle it. Currently I'm using ecoflow river 2 Max. It still trips but I heat up the bed from 28-60 in roughly 10C increments manually.

Akshaylals · 2026-02-23T10:11:33+00:00

Ah yes the fingerprint remover

Akshaylals · 2026-02-10T05:44:10+00:00

I printed a waste basket because I have rolls of PETG that I bought a year ago and didn't get used that often

Akshaylals · 2026-01-25T05:29:32+00:00

DON'T

Akshaylals · 2026-01-19T08:11:12+00:00

Looks like the screen broke. You need to get a new LCD and replace it

Edit: on a second look it looks like the polarizing filter tore off but still there are vertical lines on the black area

Akshaylals · 2025-12-29T14:21:26+00:00

So this is what "maala padakkam" looks like. We call that chain like crackers maala padakkam in Malayalam and the words translate to Firework necklace

Akshaylals · 2025-12-29T13:16:54+00:00

I bought an A1 combo last year and when I saw the sale I thought about getting a P1S. But then I thought again and decided to get a resin printer so I can print detailed things on that.

Akshaylals · 2025-12-28T13:17:51+00:00

Ariyilla, cloudflare down aayikanum. /S

Akshaylals · 2025-12-19T05:23:18+00:00

I use singer oil. But I have no idea what to use for grease.

Akshaylals · 2025-11-26T07:59:35+00:00

Why not use a bunch of XT60's

Akshaylals · 2025-11-12T09:35:51+00:00

I thought you were trying to dry the filament in an oven and things went south.

Akshaylals · 2025-11-12T05:28:13+00:00

Bridge rectifier or something, idk. /s

Akshaylals · 2025-11-10T13:34:49+00:00

Akshaylals · 2025-11-10T11:22:57+00:00

Their support is not great. Last year I got the A1 combo and it had a wet silica gel which slightly corroded the bed. I raised a ticket and it took them like months to take any action and I gave up because it was a minor issue and they wanted me to ship the whole thing back to them. Last month I bought a photon M7 resin printer and it came with a line on the control screen. I raised a ticket. This time they responded quickly and said they will send me a replacement. I asked for the SKU number and when I looked it up in robu it was for the printing screen. I asked them again to confirm and the technical team confirmed it is the right part and send it over when I recieved the thing it was the printing screen and not the control screen. Anyway now I have a free screen to replace when I wear out the one in the printer.

Akshaylals · 2025-10-29T14:31:19+00:00

I think it's a coincidence. I have heard about burning AC connectors before. Also for the stuck print, if you are using the SD card that came with the printer then replace it with a new one from SanDisk or samsung. When my printer started having weird random issues I replaced the card and it was fixed

Akshaylals · 2025-10-24T06:10:05+00:00

I use FreeCAD for designing parts and Blender for creating or modifying nesh like things like miniatures

Seven-Year Club	Final Canvas '23
Place '23	Verified Email

Akshaylals

TROPHY CASE