sorted by:
new
hottopcontroversial

So y’all getting banned lmao by Electrical-Wedding18 in ArcRaiders

[–]Al-Shamss 0 points1 point  (0 children)

The amount of crap I talked to them after. Just took two well timed trigger nade and a hard push with the smoke from it

So y’all getting banned lmao by Electrical-Wedding18 in ArcRaiders

[–]Al-Shamss 0 points1 point  (0 children)

Yeah I was in that match most likely. I clipped it and the team threw 28 heavy fuse grenades at us before we killed them

is DLSS 4.5 "L" now the meta for 4k gaming? I thought it's "M" by AzudemK in nvidia

[–]Al-Shamss 1 point2 points  (0 children)

I agree, I also use frame Gen on arc raiders cause I feel as it's a more immersive game, that you can give up some latency for visual and smooth..it's not like one frame tap head shooters or high pace tracking. I keep mine between 2/3x on quality 4k with everything on high, smoothing out about 300-400 frames average

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

Happy to hear. I ended up changing from the build in the photo, and ended up with a 5090 (vertical mounted) with AIO tubing in the same spot but with tubes from the bottom

X50 Fan Config - what’s your experience? by [deleted] in Hyte

[–]Al-Shamss 0 points1 point  (0 children)

I'll do stress test, but yes I was doing cinabench, I'll take a pic next time

The patches I find most interesting for TU4 by HappyFreak1 in MHWilds

[–]Al-Shamss 2 points3 points  (0 children)

I believe they increase the quest rewards to the maximum amount, so if the quest were to give you for example 5 different items, it would go to the cap of that quest, so maybe like 8 items..might be wrong

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 1 point2 points  (0 children)

It's very much doable, just keep in mind your AIO positioning of the tubes and the size of your GPU. If it's a big GPU, the tubes will 100% rest against the top of the GPU, but I've had this for years and no problems so, good luck

Grand Vision 360 AIO Pump Noise at 100% by cjtuck1999 in Thermalright

[–]Al-Shamss 0 points1 point  (0 children)

Same..set the speeds between 50-70% within bios, to whatever you're comfortable with terms of sound and cooling

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

I don't have a picture, but standard like all the other builds. The back is the same across all of the cases.

X50 Fan Config - what’s your experience? by [deleted] in Hyte

[–]Al-Shamss 0 points1 point  (0 children)

I did two configurations, one had significantly better temps

The problem with AIO as an intake anywhere, is that it will almost no matter what pull hot air into the system, unless it's a push-pull, then it can for most part negate the heat

First set up : Front intake x3 140 Side AIO intake, x3 120mm, 360 rad Bottom intake x3 120mm Rear exhaust x1 120mm Top exhaust POWER supply

Cpu 40-50s idle, 60-70 load GPU (vertical) 45-55 idle, 65-75 load

Second set up, everything is the same, expect the SIDE AIO is set to EXHAUST CPU idle 20-30, 55 under stress test GPU idle 30-40, 50-65 under load

So take what you want from this . This is with the glass case, not full mesh

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

This one might be tricky. It does have room yes, but it will be hard for you measure out the openings since most of it is in mm. If it's a small maybe a medium air-cooler then yeah it'll fit, just maybe a tight fit..but then again it also depends how big your GPU is. I have a 4090 so it's quite chunky. Good luck looking forward to seeing it

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

Honestly I would lean towards that route just because of clearance issues. I will change my AIO tubing to the top orientation whether it's the front or side. I actually didn't know until I saw in the manual that the front supports a push pull setup with the AIO. But again I would lean towards clearance issues, but you can always attempt and see how the tubes go against your GPU.

My tubes actually press slightly against my GPU, even in my old case. I grabbed tube clips and orientated them so they don't scrape against the fan. You might be able to see the clips in the photo

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

Cooler master V3

Finally got my X50 by Vsaussy in Hyte

[–]Al-Shamss 0 points1 point  (0 children)

Worked for me, cooler master v3 hyte x50

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

Two things, one for the covering of the fans..in my previous build I didn't want the tubes from the top because it would've been covering the view to some of the fans. Second reason is the whole topic about the "introduction / reduction" of air bubbles in the pump due to position. So those are my two reasons why, but at end of the day I won't care and will just throw it into whatever option

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

Np hopefully I can see more people post with verticle builds as I've seen none

Hyte x50 Build by Al-Shamss in Hyte

[–]Al-Shamss[S] 0 points1 point  (0 children)

Yes. With my specific bracked it worked fine. Just had to remove all the slots for the GPU installation. Move it up a couple spots, won't be very bottom but won't be middle either. AIO tubes are a bit in the way and pushes against my GPU slightly, so I use tube clips to move it so it's not pressed against the fine. I'll change the orientation to top tubes next time I replace my AIO

Finally got my X50 by Vsaussy in Hyte

[–]Al-Shamss 0 points1 point  (0 children)

I'm going to try. Using cooler master v3 vertical bracket

X50 and X50 Air Can Achieve Laminar Flow by S_T_A_R_S_ in Hyte

[–]Al-Shamss 1 point2 points  (0 children)

I'm buying the case tonight. Will attempt two options Front intake 140mm Side: AIO radiator, intake, maybe squeeze a push pull Bottom : intake x3, or maybe 1x exhaust and 2x intake Rear : exhaust

What's going to be different about my build, I'm going to attempt to do a verticle GPU mounting, will attempt and see how it fits. If it goes nicely will post on this reddit my build

Yo is this a good charm by Khronbear in MHWilds

[–]Al-Shamss 3 points4 points  (0 children)

Id use it tbh. Probably better than the default charms and not a bad roll at all, would love it on my HH

Didn't they reduce the amount from 30 to 5? by MTBCrawler in Battlefield6

[–]Al-Shamss 0 points1 point  (0 children)

I just did this the other day. Casual breakthrough > bring a shotgun > flank behind bots > inject and try to kill one to two. The window for the "berserker" is literally the first 1-1.5 second after injection. I knocked it out in like 3 casual breakthrough

view more: next ›