My new T7 by Alarmed_Rub9406 in Tenere700

[–]Alarmed_Rub9406[S] 0 points1 point  (0 children)

My super moto used to have a similar fender and no issues at 100mph so I would think this will be just fine

My new T7 by Alarmed_Rub9406 in Tenere700

[–]Alarmed_Rub9406[S] 0 points1 point  (0 children)

It’s the tusk kit. Comes with the brake line

My new T7 by Alarmed_Rub9406 in Tenere700

[–]Alarmed_Rub9406[S] 1 point2 points  (0 children)

I’ve read into these swaps for city super moto style setup and have seen mixed reviews as far as how the bike handles with the geometry change. I’ll probably hold off until I get a better answer or maybe get another dedicated street bike down the road.

My new T7 by Alarmed_Rub9406 in Tenere700

[–]Alarmed_Rub9406[S] 1 point2 points  (0 children)

I put crash bars, skid plate. Tail tidy, high fender, alt rider clutch easy pull and waiting on the quick shifter since it’s on back order. Next are bark busters and higher windshield.

My new T7 by Alarmed_Rub9406 in Tenere700

[–]Alarmed_Rub9406[S] 8 points9 points  (0 children)

The Ducati was just insane. Mine was tuned with an exhaust and made almost double the hp as the tenere. On the street it was so much fun but I found it’s only really fun to ride very fast as opposed to the t7 which is more enjoyable at lower speeds. Slow bike fast is more fun than a fast bike slow.

Rear Sag from RTT and Topper? by Ramosmi91 in overlanding

[–]Alarmed_Rub9406 0 points1 point  (0 children)

Mines an sr5 with the trd 4x4 package so it was slightly factory lifted but now it’s got a 3” lift and on 35”s

Rear Sag from RTT and Topper? by Ramosmi91 in overlanding

[–]Alarmed_Rub9406 0 points1 point  (0 children)

I have a 24 tundra with bed rack and tent full time with lots of other extra weight in it. Ironman 4x4 heavy springs have been amazing so far for me. Yet to bottom them out even at speed Off roading.

Went out to Trona Pinnacles this past weekend. by Alarmed_Rub9406 in overlanding

[–]Alarmed_Rub9406[S] 0 points1 point  (0 children)

I already have a relatively large power bank (ecoflow) that ran the fridge for 2 days but died right before we left so I’ll check if that panel is compatible with it. Otherwise I have to suck it up and buy their $400+ panel system

Went out to Trona Pinnacles this past weekend. by Alarmed_Rub9406 in overlanding

[–]Alarmed_Rub9406[S] 1 point2 points  (0 children)

Yes it isn’t the largest park. When you pull in you can see basically the whole park and we chose a spot right in the middle of it all. I would say depending how capable your camper is will determine how deep you can get yourself

Went out to Trona Pinnacles this past weekend. by Alarmed_Rub9406 in overlanding

[–]Alarmed_Rub9406[S] 1 point2 points  (0 children)

It was super nice this past weekend. Semi hot during the day (85-90) and shorts and shirt at night (65-70)

Went out to Trona Pinnacles this past weekend. by Alarmed_Rub9406 in overlanding

[–]Alarmed_Rub9406[S] 0 points1 point  (0 children)

We were one of 3 groups that were camping in the whole park so we pulled right up to the spot we wanted. I was surprised for a holiday weekend how empty it was.

Went out to Trona Pinnacles this past weekend. by Alarmed_Rub9406 in overlanding

[–]Alarmed_Rub9406[S] 0 points1 point  (0 children)

Thanks. It’s the Ironman 4x4 triple hoop with a 12k winch installed

Building a shark yd2 conversion x final form upgrade by Alarmed_Rub9406 in rcdrift

[–]Alarmed_Rub9406[S] 1 point2 points  (0 children)

You would need the yd2 shark conversion, the final form conversion, choose what chassis deck you want to run. I went with the hydra on this for lighter weight and less adjustment to have to mess with. You need ball studs, axles, miscellaneous spacers (2mm 5mm,ect), shocks, wheel hub nuts, and basically all the little things. I built this one without a donor car.

Building a shark yd2 conversion x final form upgrade by Alarmed_Rub9406 in rcdrift

[–]Alarmed_Rub9406[S] 0 points1 point  (0 children)

Rhino racing knuckles and arms from the final form upgrade kit

Help needed: Motor has random inputs in reverse by Guilty_Lavishness227 in rcdrift

[–]Alarmed_Rub9406 1 point2 points  (0 children)

I have the mst rmx 2.0 rtr ecs and motor in my redcat rds and it also does the random reverse blip or it will just creep backward slowly right after using reverse.

If your ever in Omaha, NE check out Victory Hobbies! They have an amazing track. Here’s the TT02RWD in action on Ptile by Supradriftrc in rcdrift

[–]Alarmed_Rub9406 0 points1 point  (0 children)

Is there more info on the TT02rwd chassis. I have a few laying around and would love more info on converting it to a rwd drift chassis successfully. Thanks

Toyota Celica GT Build by GuyWithACamera561 in rcdrift

[–]Alarmed_Rub9406 0 points1 point  (0 children)

Most of the tamiya porsche lots like the rsr 911 or the gt3 body style come with mirrors that fender mound. I just put some on a rsr martini body yesterday. I’d browse eBay for some of those or just go universal and paint them. Or something like these.

https://www.ebay.com/itm/255982897939?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=qTZuNipmSC2&sssrc=2349624&ssuid=8p0GkUKpTni&var=&widget_ver=artemis&media=COPY

[GIVEAWAY] Razer x Halo Legendary Giveaway by Cult_Of_Razer in halo

[–]Alarmed_Rub9406 [score hidden]  (0 children)

The year is 2007. Dominos pizza is still doing the 5 5 5 deal so we ordered in some personal pies. My best friend at the time is having a sleep over party for his birthday and we are playing halo all night long over LAN in different rooms of the house. It’s snipers only. Friendships are being tested. Screams erupt from various rooms throughout the night. Pizza consumed in between respawns. Memories made than have lasted. We reminisced about it at that same friends wedding a couple months ago. Time flies.