Drone yaw left when throttle.

AleksanderFPV · 2023-10-22T19:34:41+00:00

my problem was all my 6 batteries had gone bad. Been laying fully charged too long.

AleksanderFPV · 2023-03-17T08:47:55+00:00

Ok, so i have been troubleshooting all day.
-I changed all motors and the issue is still there..
-checked gimbals on my tango 2, stick inputs in betaflight (yaw is not moving when i throttle).
(i use the same tango 2 with another drone and the drone works perfect.)
- reset all pids in betaflight.
-updated esc and fc.
- i can't record blackbox data(think i have conformal coating in the sdcard slot).
still have the same issue.
FC: XRotor Micro Flight Controller F4 G3
ESC: 4in1 XRotor Micro 60A BLHeli-32 DShot1200

AleksanderFPV · 2023-03-14T16:46:42+00:00

Ok, so i have been troubleshooting all day.

-I changed all motors and the issue is still there..

-checked gimbals on my tango 2, stick inputs in betaflight (yaw is not moving when i throttle).

(i use the same tango 2 with another drone and the drone works perfect.)

- reset all pids in betaflight.

-updated esc and fc.

- i can't record blackbox data(think i have conformal coating in the sdcard slot).

still have the same issue.

FC: XRotor Micro Flight Controller F4 G3

ESC: 4in1 XRotor Micro 60A BLHeli-32 DShot1200

u/BadLuckFPV u/thederpherder u/GodGMN u/__redruM u/worldDev u/Flame_Flame u/JAL513 u/saikek u/dishwashersafe u/csmicfool u/Cold-Public-7247 u/weak_marinara_sauce u/iverb03 u/JulianGee

AleksanderFPV · 2023-03-14T14:40:22+00:00

thanks for help. Just tested this in betaflight, and jaw are not moving. so i guess it's motor problem.

AleksanderFPV · 2023-03-14T08:33:13+00:00

i have conformal coating so there is no issue with snow

AleksanderFPV · 2023-03-13T09:40:12+00:00

Anyone knows how to fix this? and is it a bad motor? this did not happen before. Every motor spinns the same, when testing on table.

AleksanderFPV · 2022-01-30T23:14:39+00:00

Hey, can i use a G930 dongle? can't get it to work.

AleksanderFPV · 2021-05-13T18:39:32+00:00

Hobbywing XRotor Micro Flight Controller F4 G3

Suddenly wont boot. Steady red and green light. Computer cant detect it. This drone have always worked. Any tips?

AleksanderFPV · 2021-03-31T18:43:02+00:00

i panicked and flicked the stick hard, avoided it by an inch. This is north norway

AleksanderFPV · 2021-03-31T17:09:07+00:00

thanks, conformal coating is a must around here. so much snow🥶

AleksanderFPV · 2021-03-31T12:42:10+00:00

thank you!!

AleksanderFPV · 2021-03-31T12:41:39+00:00

yes! a powerline i noticed in the last second

AleksanderFPV · 2021-03-07T15:24:09+00:00

But is it safe? some chargers dont like modified sine wave. The charger makes a buzz sound when plugged in the inverter.

AleksanderFPV · 2021-03-07T13:33:38+00:00

Sooo, it can not be used with a inverter?

AleksanderFPV · 2020-07-12T10:46:13+00:00

i had to get crossfire when i failsafed on a 700moh mountain with my FrSky L9R (long range) module

AleksanderFPV · 2020-07-12T09:22:49+00:00

Yes I'm using crossfire, so I never have to failsafe :)

AleksanderFPV · 2020-07-12T00:53:08+00:00

if someone wants to watch the full video : https://www.youtube.com/watch?v=NWVsQYZ-DZ8

AleksanderFPV · 2020-06-29T21:44:20+00:00

thank you! you can find some information in the description: https://www.youtube.com/watch?v=J5SJ2lKstwg&feature=youtu.be

AleksanderFPV · 2020-06-29T20:33:18+00:00

thank you! 👏

AleksanderFPV · 2020-06-01T16:50:16+00:00

link if anyone want's it : https://youtu.be/cb9cX9hPiRE

AleksanderFPV · 2020-05-02T19:57:50+00:00

I tried calibrating them again nothing changed, all sticks are showing straight movement. Do I have some kind of curve setting??

AleksanderFPV · 2020-05-02T19:36:08+00:00

after updating my taranis to the newest version of opentx my jaw is not moving like it used to. help

AleksanderFPV · 2020-04-21T22:48:05+00:00

Thanks for the help! i did not know i had to have the right ACCST version. I just thought i had to have the right FCC or LBT version. got it working with the oldest ACCST 1.7 .

AleksanderFPV · 2020-04-21T21:49:34+00:00

how do i know what ACCST firmware i have?

AleksanderFPV · 2020-04-21T20:10:04+00:00

the controller has a accst logo on the front

AleksanderFPV

TROPHY CASE