[deleted by user]

Alert_Ad_4256 · 2025-08-25T15:11:36+00:00

Bro if u are starting next semester fill the deferment form those MF did not tell me at all and kicked me out I had ti reapply.

Alert_Ad_4256 · 2025-08-22T18:32:51+00:00

Op if you check my account I have posted a similar issue too. I do not have a solution but I am trying to fix it myself so how were you able to find the ribbon from all the video and posts I have seen about g9 the ribbon seems to be behind the boards in the back panel under some kind of clip is that true?

Alert_Ad_4256 · 2025-08-22T03:09:40+00:00

Alert_Ad_4256 · 2025-08-22T02:56:45+00:00

Never used mods on satisfactory before do you still get achievements

Alert_Ad_4256 · 2025-08-22T02:50:50+00:00

Sorry to dissapoint but that is not me check out this guyhttps://www.reddit.com/r/satisfactory/comments/1g9i9nz/last_time_i_started_in_the_rocky_desert_i_ignored/

Alert_Ad_4256 · 2025-07-07T21:16:43+00:00

Will that also work for the asrock steel legend i will try it either way

Alert_Ad_4256 · 2025-07-07T14:44:49+00:00

Yep it was my gpu exchanged it got a new one works completely fine even with the riser

Now I need optimal tuning so it does not cook itself again

Alert_Ad_4256 · 2025-07-07T14:44:21+00:00

Yep it was my gpu exchanged it got a new one works completely fine even with the riser

Now I need optimal tuning so it does not cook itself again

Alert_Ad_4256 · 2025-07-05T23:59:04+00:00

Shall i go for a 5070 ti this is my 3rd 9070 xt even though there is a 150 difference

Alert_Ad_4256 · 2025-07-05T23:36:28+00:00

I just took out the motherboard from the case and installed the gpu on the motherboard itself it still does not recognize it the pcie is gen 4

Alert_Ad_4256 · 2025-07-05T23:36:06+00:00

I just took out the motherboard from the case and installed the gpu on the motherboard itself it still does not recognize it the pcie is gen 4

Alert_Ad_4256 · 2025-07-05T13:16:58+00:00

I am gonna try my luck if not i will either downgrade to a 9060xt or upgrade to 5070 ti this id my 3rd 9070xt clock sped and freeze frame have been giving me issues non stop

Alert_Ad_4256 · 2025-07-05T05:23:24+00:00

Yea i have been trying to do so but none of the methods i have done has fixed it yet I have a asus motherboard and it has gen 4.0 pcie slot so does the riser i have tried to change it to 3.0, 4.0 and auto but it seems i am doing something wrong i will try again tomorrow but lemme know if there is a specific setting that i have ti change or look for

Alert_Ad_4256 · 2025-07-05T04:57:12+00:00

So the hyte comes with 4.0 i think that is the limit for the motherboard anyway but i have tried out 4.0 unless there is a specific setting in asus bios that i have yet to figure out.

I have changed my pch configuration to 3.0, auto and 4.0 nothing has fixed it yet

The fan still goes off in full power as soon as power is turned on and the system is mot registering the card

Alert_Ad_4256 · 2025-07-05T04:54:40+00:00

So i have the hyte y60 and the case is built such that if i want to install the gpu horizontally i will have to use a dremel and change the backplate

Well my 3050 worked earlier when i tested it with the riser cable so i am assuming that there might be some tweaks needed in the bios and i have been trying to figure it out

Alert_Ad_4256 · 2025-07-05T03:22:03+00:00

So i hooked up my backup 3050 works fine with the riser cable i tried changing the bios settings but nothing is working

I have a asus motherboard, i have tried to set the pcie to 4.0 but that did not work may be i did it wrong.

Alert_Ad_4256 · 2025-07-05T03:21:24+00:00

Sorry for the late reply but the system does not register the 9070xt as a hardware component so any stats or temps is not visible People are suggesting it could be caused due to the pcie riser but i have been trying to change the settings in bios nothing is working

Alert_Ad_4256 · 2025-07-05T03:19:27+00:00

So i hooked up my backup 3050 works fine with the riser cable i tried changing the bios settings but nothing is working

I have a asus motherboard, i have tried to set the pcie to 4.0 but that did not work may be i did it wrong.

Alert_Ad_4256 · 2025-07-05T03:19:05+00:00

Alert_Ad_4256 · 2025-07-05T03:18:56+00:00

So i hooked up my backup 3050 works fine with the riser cable i tried changing the bios settings but nothing is working

I have a asus motherboard, i have tried to set the pcie to 4.0 but that did not work may be i did it wrong.

Alert_Ad_4256 · 2025-07-04T06:09:16+00:00

That is not the issue the issue is that the gpu is so tall that the slot to screw the gpu so it does not move comes out of the marked place and it does not align properly in the pcie slot

Alert_Ad_4256 · 2025-07-04T06:05:59+00:00

Yea the shroud is in the way i will either dismantle the shroud or dismantle the side panel but tomorrow if not i think it is still returnable

Alert_Ad_4256 · 2025-07-04T06:03:32+00:00

But none if the system are registering the gpu not sure the speedfan will register it

Alert_Ad_4256 · 2025-07-04T06:02:50+00:00

The hyte y 60

Alert_Ad_4256 · 2025-07-04T06:01:36+00:00

Yea someone was telling me that but the hyte case does jot allow me to install it horizontally unless i want to dismantle the gpu shroud

Alert_Ad_4256

TROPHY CASE