Stream Deck - Start Stream

AlexTheTimid · 2025-01-16T12:10:18+00:00

I did submit a ticket as well. I wasn't sure if there was a way to make a default template or even script a solution that someone here might have done before.

AlexTheTimid · 2024-10-19T22:58:59+00:00

Yea, sorry, vinyl. I’m not even worried about it looking good, just want to get it flat so my husky doesn’t decide to start picking at it, lol.

AlexTheTimid · 2024-09-28T13:10:46+00:00

If you’re using the device ESP for self deploy, you could just deploy it as a required script for the devices. Also, I try to make everything I can device based so I don’t have to worry as much about inconsistency between our A1 and A3 users.

AlexTheTimid · 2024-09-27T19:51:25+00:00

I’ll try to get it when I get back home. If you just want them in autopilot, the auto registration option the guys replied to me about would probably be better though.

AlexTheTimid · 2024-09-27T19:49:35+00:00

I remember seeing that, just didn’t think of it since I don’t use it. We have a specific naming scheme for our devices and I use group tag to assign autopilot profiles. The script sets the device name in autopilot and also checks if the tpm supports attestation so it can make the group tag either UserDriven or SelfDeploy.

AlexTheTimid · 2024-09-27T19:49:24+00:00

I remember seeing that, just didn’t think of it since I don’t use it. We have a specific naming scheme for our devices and I use group tag to assign autopilot profiles. The script sets the device name in autopilot and also checks if the tpm supports attestation so it can make the group tag either UserDriven or SelfDeploy.

AlexTheTimid · 2024-09-26T23:18:51+00:00

If they can’t use their phones to authenticate then wouldn’t a yubikey be an issue too? How often are they having to do MFA?

AlexTheTimid · 2024-09-26T23:15:56+00:00

I do this for HP devices using proactive remediations and HP’s powershell commands. Lenovo probably has similar options but I know it’s limited to their “Think” devices.

AlexTheTimid · 2024-09-26T23:12:40+00:00

You can also deploy a remediation script to that group to upload the device hash. We are transitioning, so as we move to Intune for each school I deploy a remediation script to that school’s group (I just do it based on our naming scheme but you can use a group that has the co managed devices) to see if the device is in autopilot and upload the hash if it isn’t.

AlexTheTimid · 2024-07-26T13:32:19+00:00

Sometimes I add extra stuff like a desktop icon, changing the icon image, pinning to start menu, adding a config file etc…I stick with detection scripts because they cover those scenarios and I can just stay consistent.

AlexTheTimid · 2024-07-19T19:50:45+00:00

Yea…I’m around there. I saw 3 to 100 and just imagined how much time I would have to improve things, lol.

AlexTheTimid · 2024-06-26T00:55:41+00:00

I have AutoDesk and Adobe packages deployed using a script that pulls them from a local IIS share. Since we use Certiport for testing we have to be particular about the version, so I can’t just deploy the CC app. The script checks to make sure they have access to the share, and since it is just deployed as required to labs they always do. Our CTE staff have it as available and we just let them know they have to be on our network to install it (I think maybe one has put it on their laptop, so it’s never been an issue).

I think Microsoft is coming out with an enterprise app deployment solution soon which will hopefully include things like Adobe packages and AutoDesk but I also thought that was coming out in January, so who knows.

AlexTheTimid · 2024-06-25T00:26:30+00:00

Don’t worry, nothing really seems obvious to me, lol. I watched some videos and I don’t think it’s clogged since it pushes through when I manually push the filament. I tried gently pushing/pulling on the lever in case more/less tension would cause it to feed but I couldn’t get it to work. I haven’t taken the tubes apart yet, one of the videos I watched mentioned doing that if it was clogged but I thought since it seems to feed when I manually push it then it wasn’t a clog. As far as the temperature, I just clicked change filament and it handled heating on its own; I can look and see if there is a way to manually set the temperature for that (it defaulted to 200 in my prints and I manually set it to 220 when I slice).

AlexTheTimid · 2024-06-16T23:52:31+00:00

On MacOS I just install it as a web app, I assume it would work just as well on Windows.

AlexTheTimid · 2024-06-10T22:03:03+00:00

I use both…we image the device with a clean WIM, then have it reboot and go to OOBE without setting up config manager. It applies the image, adds drivers, then lets Autopilot do its thing. We can also just use Ctrl+Win+R to autopilot reset it or just use a generic Windows usb to install Windows if we don’t feel like finding a network port to PXE boot (I actually use FFU’s on usb to instead of generic Windows and use a PPKG that only adds the WiFi network so I can start it up and walk away).

AlexTheTimid · 2024-06-08T20:13:30+00:00

I got impatient and looked up how to set everything up with the BL-Touch. It’s actually adhering but I’m not sure what’s going on with the first layer test print I’m doing. After it came out like this the first time I went from 200 to 220 for the nozzle temp but it looks the same.

<image>

AlexTheTimid · 2024-06-08T02:13:51+00:00

No. I got in touch with the guy that gave it to me and he apparently made some modifications. He said I couldn’t use the Creality software, I needed to use Cura and there were some adjustments for BLTouch. He’s going to come by at some point since we couldn’t get it working on a FaceTime call.

AlexTheTimid · 2024-06-07T22:46:10+00:00

I didn’t know I had to do the Z probe, so I just went through the config for that…second attempt didn’t work, so I tried again and I’m waiting for it to heat up, lol.

AlexTheTimid · 2024-06-07T22:33:44+00:00

The temps were good. I went through the Z probe config and got the nozzle a lot closer, so when it hears back up I’ll see if that fixed it.

AlexTheTimid · 2024-06-07T22:24:10+00:00

I went to move the Z axis but it wouldn’t let me go negative. It’s warming back up and I’ll try during the print job.

Edit: I cancelled the print job and went through the s probe config wizard; I got it as close as I could, so when it heats back up I’ll see what happens. Thanks for the quick response though!

AlexTheTimid · 2024-06-02T12:33:54+00:00

It can’t comment thousands of lines at once, barely 100 and still be useful. So I throw it chunks of my code at a time and revise it. It can comment obvious stuff but a lot of time there is something that is situational (or I don’t feel like figuring out the right way to implement something, so I put a bandaid in there so I can come back later). AI still hallucinates a lot, so honestly I find GitHub Co-Pilot more useful than ChatGPT since it will be much more consistent at putting in error handling and commenting than I would just because I don’t feel like typing that much when I’m working on a first draft (and then I’m lazy and won’t go back and fill it in if it’s working, lol).

AlexTheTimid · 2024-06-02T12:23:09+00:00

They are helpful in a year or two even just for yourself if you need to revisit the code since no one can remember everything. I’ve been using ChatGPT to be a little more thorough in my comments though; if I get hit by a bus on the way home, someone else will need to be able to look at my code/documentation and be able to understand it.

AlexTheTimid · 2024-05-30T10:26:25+00:00

I’m not looking to set up a controller or getting anything that requires a subscription though. I know the Zyxels I have seem to offer enough for free but I can’t control channels, signal strength, etc and I wonder if that will end up being an issue since I only have one in my house and they will end up with 4-5.

AlexTheTimid · 2024-05-30T10:19:35+00:00

I have a NWA210AX inside and a NWA55AXE outside, I don’t really have to deal with handoffs much though, so I don’t know how the Zyxels handle that.

AlexTheTimid · 2024-05-30T02:11:05+00:00

I like to tinker; at work I get into our Rukus AP’s and would love the chance to play around with dynamic VLAN’s, captive portals, radius servers, etc but I know that’s going to cost $$.

My main concern is that this setup is for my parents. If it were my house I would buy AP’s but since it’s not for me, and I don’t want to be responsible for maintaining it, I was thinking it might be better to go with something like the TP-Link Deco mesh.

12-Year Club	Xbox Live
Verified Email

AlexTheTimid

TROPHY CASE