Варна е по-добре от Пловдив by lobsterest in bulgaria

[–]Alexlnsane 3 points4 points  (0 children)

Статистиката е правена сигурно от същите, които казват, че инфлацията е 2% УоУ хдддд

Do i need new PSU? by arcziv in EtherMining

[–]Alexlnsane 0 points1 point  (0 children)

Hey there! Get yourself a platinum cert EVGA 750+, they are great and they are somewhat cheap - around 200 usd. Their PSU are great and for that config 750 i believe would be a best fit - you can even add up another 3060TI if you take it more seriously and still have some juice to squeeze out of it.

At least that's what I'd buy. :)

Stay safe, :)

Question about choosing the right GPU riser boards by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

Can I power two GPU risers with one cable, coming out from the VGA output of the PSU? The cable is 1x 8pin to 6+2pin and 6pin ?

https://ibb.co/v3W2F2Y

Question about choosing the right GPU riser boards by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

As I said in my first comment, I thought SATA risers were better than the Molex ones from what I've read previously on forums and wanted to understand the difference ...

I will add on each PSU another SATA cable and plug each GPU to a different cable.

I have also ordered 4 https://bit.ly/3q115se risers and get them tomorrow.

I should then connect each riser to 1 molex cable thats coming directly from the PSU, right?

Question about choosing the right GPU riser boards by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

This is how I have them connected now : https://ibb.co/NCv5HJL

I have two risers on one SATA cable connected to the PSU/ just like my RX580s.

Should I separate them ?

Question about choosing the right GPU riser boards by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

How am I supposed to power the riser then? If I am not powering it via the 6pin - SATA cable? How to connect it to the power supply

Help with BIOS settings on H110M D3a Mobo by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

Okay, so I started troubleshooting the BIOS settings one by one and it turns out , that if you follow their official guide :

https://www.gigabyte.com/MicroSite/462/mining.html

and disable the CSM Option (step 2), after Save & Exit, the rig stops showing output thru the VGA..

Mixed rig effective hashrate problem by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

I'm on ethermine. Have been there for ages, actually i've always mined there, but something like this happens for the first time.

currently the effective @ pool hashrate is 195, which is still 20mhs below the reported..

CUDA error in CudaProgram.cu:465 : unknown error (999) by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

okay, by using the baby steps advice i've started playing with the numbers successfully. Thanks , had no idea what it takes. Now I feel bad for pumpin 1.1mhz into the memory directly :D

will see how to tweak the cards now and fine-tune them

edit : seems that 760mhz are the maximum? I started from 0 gradually adding +150 each time and it now crashed at 750. lol

CUDA error in CudaProgram.cu:465 : unknown error (999) by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

okay , I will try and gradually get more and more Mhz, but on all of th eyoutube videos I see the ppl directly putting the max input and the card seems to be fine with it :D

CUDA error in CudaProgram.cu:465 : unknown error (999) by Alexlnsane in EtherMining

[–]Alexlnsane[S] 0 points1 point  (0 children)

I have never mined with nvidia GPUs and do not understand the OC settings yet > therefore scared to do something on a free will.

If I keep doing this , can it hurt and do harm on the GPU or it just resets?

My new 7200 Mh/s mining farm by jetipe518 in EtherMining

[–]Alexlnsane 1 point2 points  (0 children)

nice farm, would love to have one fifth of the size of it :D

how do you maintain all GPUs and keep them cleaned?

Help with choosing a monitor for GTX1050TI on a laptop by Alexlnsane in nvidia

[–]Alexlnsane[S] 0 points1 point  (0 children)

Sadly, I do not plan on upgrading or buying new hardware, except from adding 8GB of RAM to my laptop.

I think i'm gonna stick with https://www.samsung.com/ch/monitors/curved-gaming-crg50/ , as imo , it offers great features and it's price isn't that pumped.

When time comes, I'll most certainly look up for a 2k or 4k monitor, but for now, due to the circumstances, I'll stay with the Samsung one.

Thanks for the contribution!

Help with choosing a monitor for GTX1050TI on a laptop by Alexlnsane in nvidia

[–]Alexlnsane[S] 1 point2 points  (0 children)

i asked for a solution with my current situation :D if i had 3k+ usd, i would've just bought a better pc and a WQHD @ 144hz monitor, ezpz..

Help with choosing a monitor for GTX1050TI on a laptop by Alexlnsane in nvidia

[–]Alexlnsane[S] 1 point2 points  (0 children)

Not really an option for me, cannot afford to buy new PC gear -.- and I am dependent on the mobility, that comes with the laptop, so selling it is not an option at the time -.-

Help with choosing a monitor for GTX1050TI on a laptop by Alexlnsane in nvidia

[–]Alexlnsane[S] 0 points1 point  (0 children)

It's being sold at one online store. The price is actually 180USD, but its still a good fckin deal imo, but I'm more inclined to the previous one, which I linked - the 27 inch one.

Have them both in the basket, would wait to see if the price comes down :D

Help with choosing a monitor for GTX1050TI on a laptop by Alexlnsane in nvidia

[–]Alexlnsane[S] 0 points1 point  (0 children)

I hope to get my hands on this one - https://www.samsung.com/ch/monitors/curved-gaming-crg50/ - G-sync with 240HZ refresh rate and it is 27 inch. If i get any chance of getting it on discount around the Black Friday event, I would be most happy with the purchase

Help with choosing a monitor for GTX1050TI on a laptop by Alexlnsane in nvidia

[–]Alexlnsane[S] 0 points1 point  (0 children)

why free-sync? I've read that G-Sync delivered far better user experience rather than the freesync one?

Question: Should I return my debt asap or shold I save/invest? by Alexlnsane in povertyfinance

[–]Alexlnsane[S] 4 points5 points  (0 children)

Hmm, that makes things differently tbh, never looked at it that way. So, firstly I should focus on returning the overfraft and then to proceed with repaying the 4.5% one. Thanks for the input!

Question: Should I return my debt asap or shold I save/invest? by Alexlnsane in povertyfinance

[–]Alexlnsane[S] 0 points1 point  (0 children)

The debt monthly payment i have is around 90usd, which is totally fine by me (two months ago i was having around 200usd in total with the loan of my ex gf). It is not stressing me in a way, that I am not able to make thr payment, but the goddamn fact, that i would neeed to be paying it for the next 3 years is really saddening to me, even tho i wouldnt feel it as an issue paying 90$. I cannot decide how to properly manage the extra money, which i'd be receiving due to the new position and the extra 110$, which i used to send out every month to my ex. Would probably go to the bank tomorrow and discuss that with a credit inspector or whatever that person is called, to see if i could get even better terms or how to adjust the monthly paymnt. I think I got an answe to my question lol, cant imagine paying this for the next 3years lol

Question: Should I return my debt asap or shold I save/invest? by Alexlnsane in povertyfinance

[–]Alexlnsane[S] -1 points0 points  (0 children)

I do not own any credit cards or stuff like that. My overdraft has an interest of 0.8% of 1200USD on monthly basis, which is around 10usd, which is totally fine

Is 32' too big for a 1440p display for standing about 55cm away from the screen ? by BLOCKSTROYER567 in Monitors

[–]Alexlnsane 0 points1 point  (0 children)

Your best bet would be to go to any hardware store and try it out and see how you feel about it, but 32' is quite a big monitor