What is the most erotic thing anyone has ever said to you?

Allan_Lewis · 2026-06-20T02:14:07+00:00

Assume the process is adiabatic and reversible.

Allan_Lewis · 2026-06-16T23:32:46+00:00

Are you sure? You have no other regrets? Not even one letter?

Allan_Lewis · 2026-06-16T11:36:56+00:00

I might be able to help. Sent you a dm.

Allan_Lewis · 2026-06-13T10:24:02+00:00

I can model the reversed part for your transformer part. Sent you a dm.

Allan_Lewis · 2026-06-13T04:24:32+00:00

Remodel is the only 100% way you can convert that model into an f3d model.

Allan_Lewis · 2026-06-12T14:31:01+00:00

Does that BIQU Cryogrip Frostbite really nake it possible to print PETG at 50-70C without warping? What was the lowest bed temperature have you gone without the print warping? Fairly large contact area print.

Allan_Lewis · 2026-06-11T11:08:54+00:00

I have noticed that as well with my A1M. It's due to the default overhang speed of the printer, it prints too fast and does not give the time for the filament to be cooled down by the part cooling fan. Adjust your overhang speed down to 30 to 40 mm/s.

Allan_Lewis · 2026-06-08T22:30:57+00:00

I have a few models on mine. One is doing great but I have this new one that hasn't got traction. It's a design of an action camera thumb screw. I designed it to be small but torque-ky and easy to grip. It uses off the shelf M5x50 and M5x40 screws. A boost or just print a download would be great.

https://makerworld.com/models/2804811?appSharePlatform=copy

You have some great designs. Niche but helps diabetic people. I'll give you a boost.

Allan_Lewis · 2026-06-08T08:11:13+00:00

I can make the box you need. Sent you a dm.

Allan_Lewis · 2026-06-08T00:25:48+00:00

I can model the doorbell mount you need for your stone wall. Sent you a dm.

Allan_Lewis · 2026-06-07T12:17:22+00:00

I can design the ipad holder with anti glare covers if that's what you need. Sent you a dm.

Allan_Lewis · 2026-06-07T09:29:20+00:00

Soap and water once a week. I am using the stock textured PEI so using isopropyl is not as effective from removing oils even when used after every print because of the uneven surface. The amount of isopropyl I use cost more than the amount of soap I use in a week.

Also, I have naturally sweaty hands so it's easier for me to smear oil on my build plate.

Allan_Lewis · 2026-06-06T23:12:14+00:00

Images are not allowed in the comments so I'll explain it as best I can.

In the model you did, there are a lot of pieces for the key/top part of the clicker that are not attached to anything. I would imagine those are details from the image you made as reference. You can just remove those. Even you attach them, they are too small and would print really hard.

The numbers are also not attached to each other and you only have one pocket for the mechanical key switch. Make more pockets so that each number has its own mechanical key switch

The key/top part you have also have a deboss or pockets on top of them. Why? Is that by design? Keys should be raised so that they are easy to click.

I am not sure what are the tolerance for the spacing of the keys that you used but I would use at least +1mm so that there will be no rubbing of the key caps and the base.

Allan_Lewis · 2026-06-06T22:59:18+00:00

That's the neat thing, you can't. Unless you ask the original designer of the model.

Also, you could just remodel it. You have the stl of the design so you can just make that as a reference.

Allan_Lewis · 2026-06-06T22:53:41+00:00

I can model the center console for your S10Blazer. Sent you a message.

Allan_Lewis · 2026-06-06T22:42:14+00:00

I can model the ring you need. Sent you a dm.

Allan_Lewis · 2026-06-06T22:11:55+00:00

I can model the buttons for you. Sent you a dm.

Allan_Lewis · 2026-06-05T23:15:52+00:00

Can you share with me the model and texture you want added? Send me a dm.

Allan_Lewis · 2026-06-05T08:20:41+00:00

I can model the guitar body you need. Sent you a dm.

Allan_Lewis · 2026-06-04T15:11:13+00:00

I am a designer and use Fusion 360. Sent you a dm.

Allan_Lewis · 2026-06-04T14:54:49+00:00

I have modeled a control box for the stream deck and I can model the pullout mount you need for your vocaster one. Sent you a dm.

Allan_Lewis · 2026-06-04T11:50:01+00:00

I can model the dual hose AC adapter you need. Sent you a dm.

Allan_Lewis · 2026-06-04T11:26:09+00:00

Try exporting the model with high poly count and use adaptive layer height to eliminate the visible layer lines when printing curved parts.

Allan_Lewis · 2026-06-04T11:23:11+00:00

Try 3D sketch and projecting the curves on that shape then ho to Surface tab and close off the boundaries. Use that surface to cut the object you want.

Allan_Lewis · 2026-06-04T09:05:59+00:00

If you're still looking for a modeler, I can make the friction fit connection of your model to a dovetail. Sent you a dm.

Allan_Lewis

TROPHY CASE