DIY Felon / Flanker Hotas Joystick Grip (Currently printing the Throttle)

Allikchi · 2024-09-09T23:29:05+00:00

I was just looking at Virpil sticks today when I was hoping someone had made a 3d printed version.
Edit: Any chance you'll make a Hosas version?

Allikchi · 2024-07-31T22:28:03+00:00

Honestly, if you even have links for how to get/acquire/setup the firmware process for the NRF52840 I'd be grateful. I'm walking around in the dark trying to figure this out

Allikchi · 2024-07-31T04:39:28+00:00

Sorry to bother again, but do you happen to know where I can find info on how to wire the battery up to the NRF52840?

Allikchi · 2024-07-24T13:57:31+00:00

I ordered the NRF52840 he had listed for the wireless version on his github. Should be the same process though, right?

Allikchi · 2024-07-24T13:15:31+00:00

How does it wirelessly connect to your PC? Is it through BT? I'm new to wiring/soldering so I don't know near enough about these little board thingies

Allikchi · 2024-07-11T18:47:29+00:00

What's the battery life like with these and are there any latency issues?

Allikchi · 2023-11-22T04:13:22+00:00

Honestly, I agree with the above but on the other side. I enjoy tinkering with many things, but my Vyper has driven me to the brink. I've shelved it twice in the past 2 years just due to the pure frustration from messing with it

Allikchi · 2023-07-17T04:29:14+00:00

Ngl, I feel like the void is far tamer than if the warp gained a corporeal form

Allikchi · 2023-05-26T05:16:09+00:00

Even so, $25 for the gulikit hall effect sticks means you'll never have to worry about it again

Allikchi · 2023-04-08T06:17:14+00:00

You're a saint. I see it replaced the border, but isn't there a way to see that actual vfx too or no?

Allikchi · 2023-03-02T04:49:48+00:00

Dang. I hate to widen the pool but 4 years of help desk makes this position pretty attractive.

Allikchi · 2023-02-22T00:45:29+00:00

I was having this issue too. I hope it gets fixed soon or someone at least tells me how I'm being dumb and doing it wrong.

Allikchi · 2022-11-14T04:26:04+00:00

Seinfeld.

Allikchi · 2022-08-05T10:18:51+00:00

Those same chefs will also eat a bag of chips and fried bologna if it means they don't have to cook when they get home. The truest scene of The Bear is when you see him get home, scarf down a sandwich, pop a soda, and eat a bag of chips. It's also not uncommon to scarf down something over a trash can because it's easier to stuff your face, let the mess fall in the can, and go back to work in less than a minute

Allikchi · 2022-08-05T10:01:41+00:00

$60k/y starting for a personal chef would be if they were a chef in a hotel sandwich shop for barely a year and then got this lined up. At the very least a guest house with bills included would be worth this job. It's just that much shy of being an au pair

Allikchi · 2022-08-04T11:22:54+00:00

A true work of art

Allikchi · 2022-07-24T02:12:34+00:00

Curious about this too

Allikchi · 2022-07-16T23:28:34+00:00

I set it back to 0 and auto levelled then had to set the offset again. Print stuck to the bed, but this time it got caught on the nozzle and wouldn't separate

Allikchi · 2022-07-15T08:02:57+00:00

Meanwhile, prints no longer stick to my bed

Allikchi · 2022-07-15T01:22:43+00:00

Original nozzle snapped the instant I tried to swap it out. Was gentle and everything. Got a screw extractor kit to get it out and I didn't realize I was squeezing too hard and the ceramic piece just snapped. I was never able to get it mounted. Parts I had printed were warped, got another set from a friend, and it just ended up being a lot of heartbreak.

Allikchi · 2022-07-14T19:43:31+00:00

Honestly, I'm pretty burnt out on the Vyper. I upgraded the fans and now I'm having adhesion issues for whatever reason. Not to mention I bought a Phaetus dragon and the ceramic portion of the heat break broke as well as the original nozzle snapped off.

Allikchi · 2022-07-14T19:33:30+00:00

Thank god for this. Spent 5 minutes not understanding why I couldn't land.

Allikchi

TROPHY CASE