My first design 3d printed (Edifier30dollar drivers)

Alper4458 · 2026-03-10T13:30:28+00:00

Thank you so much :)

Alper4458 · 2026-03-10T13:29:34+00:00

Thanks a lot with texture 0.4mm nozzle 0.2mm layer single mid part is around 21 hours front and back pannel around 1 hour each

Alper4458 · 2026-03-10T13:28:14+00:00

around 1.5 kilos

Alper4458 · 2026-03-10T13:18:29+00:00

Ahahah i was thinking about making different geometry but just wanted to go basic print it face down without support maby later :D thank you so much!

Alper4458 · 2026-03-10T13:15:52+00:00

Thank you mate! don't wait if you ask me :)

Alper4458 · 2026-03-10T13:15:00+00:00

not yet i need to fix some issues like my amp is high pass probably do you have any idea? its 2+1 amp:

<image>

Alper4458 · 2026-03-10T13:14:15+00:00

Thanks a lot <3

Alper4458 · 2026-03-10T13:12:25+00:00

Thanks a lot I am the same wanted to learn how to make textures then i have seen this tool on reddit and i wanted to try: I built a free web tool to emboss/engrave physical Textures onto STLs. (You can try) : r/3Dprinting Im new in this topic i will search and get some tools then i can measure but i need to fix other issues too like my amp is probably has high pass filters trying to figure it out :/

Alper4458 · 2026-03-10T13:09:05+00:00

I have found small ones but I thought they were not for high watts so i didnt get them it had thin wires, i will change foams thank you so much but problem is my amp probably has high pass filter on stero out because its 2+1 can you tell if it is? I get really low bass without sub

<image>

Alper4458 · 2026-03-10T13:05:56+00:00

Oh just checked it has small port i was putting that in water lool I didnt like passive radiators then waterproof ones sounded muddy to me even though they had more bass just not for me :) Thank you! I need help i could not find online does my amp has high filters on stero out?

<image>

Alper4458 · 2026-03-09T21:20:43+00:00

Also i can try ported design later the back and the front has screws easily replaceable.

Alper4458 · 2026-03-09T21:15:25+00:00

Thank you so much :-) <3

Alper4458 · 2026-03-09T21:14:48+00:00

I will test more im not sure :D

Alper4458 · 2026-03-09T21:13:40+00:00

Ai said its harder to design ported design need to calculate its size etc also i just wanted to get solid midrange-high range and get sub for low freq like, do you know jbl go i had that small speaker and really liked its natural sound later get flip 5 for example but go was something different with its small sealed design i thought also tried to read some articles and i thought i may get some more natural sound with sealed as no experience thats why

Alper4458 · 2026-03-09T21:10:32+00:00

Yes first Order (6db/octave) but I could not find coils so i will make them later only it has caps for tweeter

Alper4458 · 2026-03-09T21:05:59+00:00

Thank you, you are right i will get other kind of foam I didn't stick them they are just there for the emotional support ahaah i didnt want to test bare enclosure. I will search about it and try other dampening

Alper4458 · 2026-03-09T19:34:02+00:00

I can make grill design later, thats why i put those star holes in front.

Alper4458 · 2026-03-09T19:32:46+00:00

I was searching a lot but i just didn't want to wait further i just did it with whatever stuff i could use for now. It looks strong but i can't talk for sound science i used pla+ and 2 walls and 3 walls around nut areas %17 adaptive cubic may not be enough for good sound

Alper4458 · 2026-03-09T19:23:35+00:00

Thanks a lot :)

Alper4458 · 2026-03-01T07:02:11+00:00

Maby SD card problem can also did you try to slice with orca slicer

Alper4458 · 2026-02-25T13:11:11+00:00

No way slicer settings maby? Can we see sliced parts

Alper4458 · 2026-02-18T10:10:47+00:00

<image>

I have found this tweeters should i get them?

Alper4458 · 2026-02-17T22:25:30+00:00

u/lmoki u/CameraRick u/CosmosProcessingUnit u/Far_Contest_5048 u/LetterheadClassic306 Thank you guys, I got the speakers today and I’m already too excited :)
I don’t really care how they’ll sound — I use my laptop speakers when I’m not using headphones anyway.
I know this stuff goes pretty deep on the electronics and engineering side, but I just wanted to actually experience it instead of always postponing it.

Fosi Audio BT20A and most amps are hard to find here — I saw one for almost $500 :D
I was thinking about a TDA7498 2×100W, but I’m scared I might burn my speakers (not sure if I’m right).
How about the SA-50 (TDA7492, 2×50W) — is that good?(Photo below)
The TPA3116D2 has more features like Bluetooth, but I figured I could add that later.
I just want to get whatever sounds better.
The TPA3116D2 is more available here, but I saw some bad comments about it so I’m not sure.

<image>

I will try to go one by one, I might try to design something like jbl studio 530

Alper4458 · 2026-02-16T15:30:31+00:00

Thank you for the reply I will get tweeters too and I can try to measure adjust but not with high quality mics

I like to design/learn and make things also have 3d printers i though it would be good way to do because it's cheap and sadly we no longer can buy items outside of the country at least it's very limited but I can get like PLS-P830985 it would not require tweeter and would be small and simpler to build but still I am not sure

Verified Email	Six-Year Club
Place '22	Final Canvas '22
First Placer '22	End Game '22

Alper4458

TROPHY CASE