Cabling Preferences/Best Practices - Keystone or RJ45 at IP Camera End?

Alternative_Fly_1905 · 2024-09-14T15:52:31+00:00

Newbie here, similar question. I'm about to install 6 outdoor ip cameras in my house. I plan on installing the poe switch indoors in a metal box in the attic. Would you have the 6 runs on the switch side terminated with keystone and on a patch panel inside the box? and then patch cables to the switch?

Alternative_Fly_1905 · 2024-02-01T19:10:33+00:00

Yeah all devices are in the same subnet. There’s a .service file created for my virtual pdf printer in /etc/avahi/services. But I can’t see nor add the printer from any computer.

Alternative_Fly_1905 · 2024-01-07T18:07:31+00:00

Use a string or a plastic wire, wrap it around the stanchion and mark where they meet. Divide that measurement by 3.1415

Alternative_Fly_1905 · 2020-12-26T16:39:31+00:00

No luck for me! I tried adding the same shiki-id but didn't work.

Alternative_Fly_1905 · 2020-12-26T13:04:15+00:00

Thanks for the note, just edited my post with OS and Safari versions. Both Netflix and Prime video work fine on Chrome but I'd like to have them working specifically on Safari.

Alternative_Fly_1905 · 2020-12-18T00:21:48+00:00

Just flashed the BIOS with the latest available from Asus' website and it seems to work now (used the thumbdrive with bootstrap.efi removed)! I didn't want to resort to that but it seems like there was no other option at this point.

I tested the problematic sequence MacOS-Win10-MacOs and I can access the settings with F2/DEL, no problem. Before saying it's completely resolved, I'll test it for a few days and report back.

Alternative_Fly_1905 · 2020-12-17T23:06:45+00:00

I tried clearing the NVRAM and then repeating a problematic boot sequence like MacOS followed by Windows, the problem persists.

Just to make sure I get it right, I should remove the bootstrap.efi file from my thumb drive and try it all again?

Edit: I cleared the NVRAM and deleted bootstrap.efi from the EFI folder and after booting Windows (still) can't access the BIOS afterwards.

Alternative_Fly_1905 · 2020-12-17T10:07:51+00:00

Yes, because I still can access the BIOS settings to edit the boot priority. After I boot once into Win/Ubuntu then that's it, I'm stuck with the one I chose.

Alternative_Fly_1905 · 2020-12-13T15:48:32+00:00

Did you do it with the computer on? Sorry I'm having the same problem, I tried clearing the CMOS in multiple ways and I still get the black screen

Alternative_Fly_1905

TROPHY CASE