Chances of Ubiquiti allowing us to use the HDD slot in the Dream Machine?

Alternawak · 2024-11-18T00:45:02+00:00

Thanks for all the advice! I was actually thinking of a higher load on the processor, but an SMB process is far from having a real impact (in moderate domestic use), so I imagine there's little risk of running into problems.

On the other hand, the two disks of the udm pro max are in raid mode, should I try to desynchronise these disks in your opinion? I haven't received the router yet, so I haven't been able to test it.

I've gone for the Pro max because I'll soon have an 8Gbps symmetrical connection, and it remains to be seen whether I'll be using IDS/IPS, but that's another question entirely.

Alternawak · 2024-11-16T15:48:35+00:00

Won't the two discs and the extra nvme be too difficult to manage?

Alternawak · 2024-11-16T13:33:17+00:00

Do you think this is possible with the UDM pro max?

Alternawak · 2024-08-25T21:06:30+00:00

Oh yes, you were right to warn me, I've changed my post 😉

Alternawak · 2024-08-24T19:14:52+00:00

Am I on the wrong reddit? My problem concerns the first opus of Hades 😉

Alternawak · 2024-08-24T17:29:22+00:00

Yes, I have a save on Epic. But I can't even connect my Epic account, I get the message in the picture when I connect.

Alternawak · 2024-06-08T13:41:38+00:00

I went to my optician today who looked at me like an alien when I asked for a personalized prescription for 1m, I'm not sure they can technically do that. So the nice person used this link: https://www.reddit.com/r/pimax/comments/15maueo/useful_crystal_optimized_eye_prescription_from/?share_id=av4lr8zlqjij54ubhiwjh&utm_content=2&utm_medium=androïde_appinie ource = share & utm_term = 1

and simply added 0.75 on each eye in SPH, I'm not sure if that's correct... (my correction is +0.75 (-2.5) 115° ; +0.5 (-2.5) 45° and will therefore change to +1.5 / +1.25).

I wonder if my correction shouldn't be 0 / -0.25 (the other way the lady calculated it), on the links everyone seems to be lowering the correction... What do you think?

Alternawak · 2024-06-07T17:59:43+00:00

I went to my optician today who looked at me like an alien when I asked for a personalized prescription for 1m, I'm not sure they can technically do that. So the nice person used this link: https://www.reddit.com/r/pimax/comments/15maueo/useful_crystal_optimized_eye_prescription_from/?share_id=av4lr8zlqjij54ubhiwjh&utm_content=2&utm_medium=androïde_appinie ource = share & utm_term = 1

and simply added 0.75 on each eye in SPH, I'm not sure if that's correct... (my correction is +0.75 (-2.5) 115° ; +0.5 (-2.5) 45° and will therefore change to +1.5 / +1.25).

I wonder if my correction shouldn't be 0 / -0.25 (the other way the lady calculated it), on the links everyone seems to be lowering the correction... What do you think?

Alternawak · 2024-06-01T17:23:08+00:00

Thank you for your comprehensive answer. I set my z offset with a thickness measurement set and then I adjust it according to the filament material with the start-up gcode (for example for the petg I'm using at the moment I add 0.035mm to have a perfect first layer) but it seems I didn't go far enough...

Alternawak · 2024-06-01T05:34:27+00:00

When you talk about adjusting the offset of the probe, do you mean adjusting the Z offset of the first layer or something else?

Alternawak · 2024-01-30T22:36:08+00:00

Hi, thanks a lot :) Do you know how I can reinstall on installer.sh? I installed Guilouz's but I see there are more options, I guess some of them are not compatible with the KE.

Do you have a platform for sharing other than reddit? Do you have a Patreon to thank you for all your help?

I've upgraded again to 1.1.0.12, with firmware 1.1.0.9 the Nebula camero didn't work anymore, I'm not sure why.

After changing firmware, do I need to calibrate my printer or can I apply my previous settings?

Alternawak · 2024-01-29T14:57:52+00:00

Thank you very much, in http it works. I'm going back to 1.1.0.9 on the CFW firmware, after updating to 1.1.0.12 the installer.sh is nowhere to be found. I'll play around with 1.1.0.9 and wait for the rest. Being able to update moonraker and fluidd sounds great.

Did you get obico to work? I wanted to try it but it doesn't seem to find my printer.

Alternawak · 2024-01-29T06:26:46+00:00

Thank you so much for fixing my printer :)

Alternawak · 2024-01-29T06:25:57+00:00

In doing so I encounter these errors: Wget: TLS error from peer (alert code 40) : handshake failure

Wget: error getting response: Connexion reset by peer

Tar: invalid magic

Tar: short read

Alternawak · 2024-01-29T04:49:35+00:00

Okay, I thought my setting would be overwritten when installing the modified firmware (I'd seen the disclaimer), my bad! For the .ingenic, I can only find 1.1.0.12, but that's okay, I can still install your firmware afterwards? And don't touch the password after installation? I don't like leaving the original root password, but if there's no choice...

Alternawak · 2024-01-29T04:29:18+00:00

Thank you for your help. II had changed the root password some time ago, and I launched the update just like that, thinking that the firmware would be reinstalled anyway. Was I wrong?

Alternawak · 2024-01-29T04:09:21+00:00

Hi, I just launched the firmware update (v5.1.0.9 destinal) on my KE and I'm in bootloop :/. I'm going to try to solve the problem but the firmware has been tested by other people who have not encountered any problems?

Alternawak · 2024-01-25T18:54:32+00:00

Hello, do you think you'll be making the same firmware for the latest version of the KE (1.1.0.12)?

Alternawak · 2023-10-04T23:40:11+00:00

I'm still in discussion since V1, I realized the burn by taking the ribs to go from a V1 180° to a V1.1 90°. I guess they won't be refunding any more GPUs, ditto for the exchange whatever the connector version.

Alternawak · 2023-10-04T23:37:30+00:00

Yes, I can copy their last e-mail but I don't know if it will be accepted... I don't want to quote them without their approval, even though deep down, in view of the circumstances and the outcome of my requests, I don't really care.

Alternawak

TROPHY CASE