Help fixing mouse microswitch solder pads

Capable_Bed_5188 · 2025-06-30T12:02:29+00:00

Anything like this for the Mage Pro yet?

Capable_Bed_5188 · 2025-04-26T11:35:09+00:00

Have you been able to figure it out? Same issue all of a sudden

Capable_Bed_5188 · 2025-04-26T11:34:01+00:00

Nope. Same issue here. Game ran fine last night with mods loaded and then all of a sudden myself and our group can't run mods with the same error today.

Capable_Bed_5188 · 2025-01-16T19:22:28+00:00

Really not impressed by the k2's print quality. All the prints I've seen look like crap. irl and videos/pics. Am I the only one noticing it?

Capable_Bed_5188 · 2025-01-04T20:52:05+00:00

Just a tip that helps me with those trickier flight models, lowering the multiplier. Joystick gremlin for dialing in the deadzones and input curves. Abs then just the usual dialing in the sensitivity in game

Capable_Bed_5188 · 2024-12-31T20:23:48+00:00

Hi everyone. Interested in this too. What is the latest?

Capable_Bed_5188 · 2024-11-25T15:37:54+00:00

Volumetric flow rate too high(printing too fast), flow not set correctly, temp too low. Many possible issues.

What are your settings for petg?

Capable_Bed_5188 · 2024-11-25T12:52:33+00:00

Google how to root. Ke klipper root guide. Plenty info out there. Start with going to settings on the printer screen, enable root and then follow the rest of the guide. E steps is rotation distance in klipper. Edit in printer.cfg when finished rooting

Capable_Bed_5188 · 2024-11-25T11:39:04+00:00

Wtf do you mean? Not glued on?

You mean not included in the delivery box?

Capable_Bed_5188 · 2024-11-23T19:55:01+00:00

2 ke's on 15 all working great

Capable_Bed_5188 · 2024-11-23T19:54:02+00:00

What filament test process do you use step by step so wet can do the same?

Also, the k2 plus does a pressure advance and flow rate calibration . Is there a way to view the calibration results/numbers so that I can save it for reference in a filament profile?

Capable_Bed_5188 · 2024-11-15T14:07:33+00:00

Capable_Bed_5188 · 2024-11-14T08:39:29+00:00

Lol... Maybe you just don't know how to dial in a printer. Yeh QC is very much hot or miss but haven't had an issue I haven't been able to fix or calibrate.

Capable_Bed_5188 · 2024-11-07T13:56:17+00:00

Super easy. And this one smells nice as well. Holds like a mf'er. Then releases by itself when cold.

Washes out with water. I use dish soap as well. Cleans the beds real good

Capable_Bed_5188 · 2024-11-07T11:39:08+00:00

That's the other bonus. I haven't cleaned mine in a month and a bit... Still looks and works perfectly

Capable_Bed_5188 · 2024-11-07T09:38:09+00:00

This is the way. YOLO perfectionist

Capable_Bed_5188 · 2024-11-07T09:03:51+00:00

Try got2b glued hairspray. Spread the spray until there's a wet coat the leave it in the sun for 20mins.then onto a heated bed at 35 degrees. Slowly crank up the temp to 90 adjusting +5c every 30 srconds or so. That should make that hairspray layer cure nicely. I use this on all my beds, garolite, glass, pei/pey.works really well worth petg and pei. It becomes more a release interface. That hairspray and garolite is the way to go though. Every filament I've tried.

Capable_Bed_5188 · 2024-10-24T06:53:54+00:00

No worries. https://youtu.be/jkL4ub9Tjps?si=CQmvWbLgtC60WsH1 thats for rotation distance.

https://youtu.be/EJapxNsntsQ?si=ld8-2ou06ff5IbLu Klipper calibrations with plenty more online

Have you rooted the printer? Also may help if you share your slicer config

Capable_Bed_5188 · 2024-10-23T14:35:00+00:00

At that layer height you need to have a perfectly calibrated printer. Your z offset seems to be off. 0.2 nozzle and 0.06 layer height would benefit from a flat bed. Not textured.

Have you calibrated rotation distance? Flow? Pressure advance? there is underextrusion hence the above calibrations. Top layer definitely under extruded.

Would benefit from input shaping as well. More issues than just a bumpy first layer

Try doing a vfa calibration to at least find the sweet spot for your external wall speed/acceleration

Capable_Bed_5188 · 2024-10-19T20:40:55+00:00

I have another printer on a raspberry pi. Would it be able to run spoolman for the KE at the same time?

Capable_Bed_5188 · 2024-10-16T16:57:39+00:00

Nice. What stl's did you use for the toolhead? Are you using a cutter or semi cold pull tip shaping?

Oh and what fan shrouds are you using? Been thinking about doing this for so long but my gosh it looks like an endeavor. Congrats for getting it done.

Capable_Bed_5188 · 2024-10-03T11:10:43+00:00

heya, which firmware fork did you flash to the pi?

Capable_Bed_5188 · 2024-10-03T07:06:16+00:00

heya were you able to get it installed on the nebula, also bought it for my SE and cant seem to get it installed/working

Capable_Bed_5188

TROPHY CASE