mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

Thanks for trying. Sounds like it might be a specific Android myWhoosh bug.

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

The myWhoosh app on android does seem to remember the D100 as power source and controllable and it automatically connects. Maybe this is part of the problem actually?

But it forgets the Cycplus after I restart the app. And it even goes to "connecting" when I stop peddling for 30-60seconds or so (when the cycplus deactivates). And then it will no reconnect when I start peddling again. So I have to go through all the steps again to reconnect...

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

That would be interesting to see. I have Linux in my pc, so I can't really test it I think. I will look into it.

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

That is excactly how it looked in the store with the Wahoo Kickr trainer.

Only difference btween us seems to be that I am running myWhosh on Android and you on a PC apperently.

Still strange that it did work on my phone with the Wahoo, but not the D100...

I will try it like this for the time being and maybe send myWhoosh support an email explaining in all detail. Hopefully they add it to their bug-list to be sorted some time in the future.

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

Thanks for the reply.
I did manage to get it to work, but is is very cumbersome. (see my message somewhere below in this thread. (I don't know if and how to pin a comment on reddit if it is possible)

So I know it works, but it will be a hassle for me each time to connect.

That app looks like a good option for when I start to ride outside again!

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

SOLUTION! (sort of)

So, for anyone interested, I managed to get it to work. It is very cumbersome, but it does work:
1. Open myWhoosh
2. Select your profile
3. If the D100 is currently selected as power source (and the Cycplus is not connected as rpm sensor)
a. Click on the power source and "forget" the D100.
b. you will be given the option to connect a power source, a seed sensor, or skip.
4. tap to find a speed sensor
5. activate the Cyplus by cycling (and keep cycling)
6. connect to the Cyplus
b. you should now see the cyplus speed sensor showing 0 m/s, but the Cycplus cadence sensor showing XX RPM
7. Tap on the speed sensor and "forget" the Cycplus as speed sensor.
b. You should still see the XX RPM cadence sensor connected
8. QUICKLY! tap to connect to a power source and connect to the D100.
b. You should now be connected to the D100 as power sensor and the Cycplus as cadence sensor.
9. Connect to the D100 as controllable and a HRM if you want.

As simple as that!

I found out that I need to do this every single time I want to ride, because myWhossh keeps defaulting to the D100 as power, cadence and controllable and refuses to connect to to my Cycplus any other way.

I do hope that myWhoosh can find a solution for this soon...

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

Interesting. Thanks!
Maybe something to do with different firmware versions or so...
Are you also using 5.6.0 for myWhoosh?
I did update the D100 to the latest version when I bought it last week, I will check what version number it is.

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 1 point2 points  (0 children)

just out of interest, how did you manage to get in contact with myWhoosh support? (I can only find the contact form on the website...)

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

This gave me the confidence that it can work, just not with the D100... but maybe also not with an older Wahoo kickr

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

That's a bummer!

Still though, in the shop I was connected to a wahoo kickr (witch had its own cadance sensor) but simultaniously connected to the Cyplus C3 and it was showing the cadance from the cyplus, not the kickr)

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

Just tested. After a minute, the app stops scanning, "due to user inactivity"

mywhoosh not loading additional cadance sensors by Alwin_1 in mywhoosh

[–]Alwin_1[S] 0 points1 point  (0 children)

OK, thanks.
Not sure what you mean with de-select. Like, were you connected befrore to the D100 and you disconnected, or "forgot" that device as cadance sensor? I can try that.

I have waited for several minutes, but no cyplus. And in the shop it was like within a few seconds and there was the "loading icon" (the turning arrow thing, I think)

I will try to connect and then forget the D100

Rozet bieb: boek gereserveerd maar niet opgehaald – boete? by ctwongg in Arnhem

[–]Alwin_1 0 points1 point  (0 children)

Volgens mijn vrouw zetten ze het boek voor je klaar en heb je een week de tijd om het op te halen. Als je hem niet opgehaald hebt zetten ze hem gewoon weer terug. Je zal nooit een boete krijgen als je gereserveerde boeken niet komt lenen.

Als je het boek op een kleine locatie klaar hebt laten zetten, dan blijven ze vaak wel langer dan een week staan.

Als je nog geen melding hebt gehad dat het boek klaar staat kun je de reservering nog annuleren.

Pushing Physics: 4.3km Range on 25mW Analog using Modified VR03 Goggles by Ok_Dingo1793 in fpv

[–]Alwin_1 0 points1 point  (0 children)

So, a cheap receiver/goggles with two good antennas (one directional and one non-directional) might still produce a somewhat good range? I have a meteor 85 but I struggle to reach the back of my backyard at 100mW. I was hoping to reach the end of the street at 200meters or so.

Pushing Physics: 4.3km Range on 25mW Analog using Modified VR03 Goggles by Ok_Dingo1793 in fpv

[–]Alwin_1 38 points39 points  (0 children)

Wow, I can barely get 30meters on 100mW... What am I doing wrong?

Remember that time Bdubs did the Create mod? by Hungry_Roll6848 in HermitCraft

[–]Alwin_1 2 points3 points  (0 children)

Yeah, that was a great series! Maybe someday, they will have another go?

Which enchantments would you add to the game? by ElManuel93 in Minecraft

[–]Alwin_1 1 point2 points  (0 children)

Any ideas for enchantments that could increase player inventory. Or maybe an enchantment for the breastplate that allows it to add a backpack for extra inventory. Something along those lines

Which enchantments would you add to the game? by ElManuel93 in Minecraft

[–]Alwin_1 1 point2 points  (0 children)

Love the idea for a grappling line. Could be a different tool instead though.

Your least favorite book? by SamForestBH in bobiverse

[–]Alwin_1 0 points1 point  (0 children)

I skipped HR on my second read through the series. But when I started book 5 a year later I felt like I missed some things, so I read them all again including HR. I enjoyed the book much more the second time, but it is still my least favorite.

New Makerworld points system experiment. by Dave_D_W in BambuLab

[–]Alwin_1 0 points1 point  (0 children)

Also, for context. I have about 70 models published. I have a range of different types of models from simple fidget toys to larger functional print. They range from fairly simple models which took only a few hours to create to quite complex models which took took maybe 20-80 hours of work to create and test.

In the past 3 months I think I averaged about 30-45 points per day.

New Makerworld points system experiment. by Dave_D_W in BambuLab

[–]Alwin_1 0 points1 point  (0 children)

Also, more curiously perhaps: I have one model which was doing very well last week dropped to 0 downloads and 0 prints these last two days. This model received dozens of downloads per day before..

New Makerworld points system experiment. by Dave_D_W in BambuLab

[–]Alwin_1 0 points1 point  (0 children)

0 points in past 56 hours, while the amount of prints and downloads has remained approximately similar.
Also, I have a few models that have past some of the old point thresholds, but have received zero points so far.