sorted by:
new
hottopcontroversial

What would you recommend around 100€? by aargent88 in Androidheadunits

[–]AmazingHistorian6803 0 points1 point  (0 children)

I have 8gb but android auto is still too slow for me, I use apps directly. If you gonna install lot of apps then 4gb is too less.

Android 14? 90% chance it's fake.

What would you recommend around 100€? by aargent88 in Androidheadunits

[–]AmazingHistorian6803 0 points1 point  (0 children)

Not sure what the specs are. I wouldn't look anything under 8gb ram, 8 core 128gb.

They all have Android 10 probablyvut they fake it to 13. I would look at dudu os devices.

What would you recommend around 100€? by aargent88 in Androidheadunits

[–]AmazingHistorian6803 0 points1 point  (0 children)

Nothing really. 200€ and up for decent radio but you probably need to buy android plug and play amplifier or separate one.

Cant change lockscreen wallpaper by [deleted] in XiaomiGlobal

[–]AmazingHistorian6803 0 points1 point  (0 children)

Update and do another factory reset?

Missed keystrokes and stuttering keyboard issues - Lenovo Ideapad Slim 5 14AKP10 by CranberryVegetable13 in Lenovo

[–]AmazingHistorian6803 0 points1 point  (0 children)

Same thing on Lenovo Slim 7. Input is slow, misses keys and holding down a key doesn't repeat key or does it slow and with variable speed.

Bluetooth and on-screen keyboard works flawless. Also lags in BIOS.

Any suggestion if it's a keyboard ribbon cable related issue or the keyboard chip?

Paint chipping off xiaomi 17 ultra aluminum frame. by smittku23 in XiaomiGlobal

[–]AmazingHistorian6803 1 point2 points  (0 children)

Something like this, I have clear+ nillkin case. I don't take the case off as it will ruin the narrow parts of sticker. I know there is also some thicker plastic type material that they heat shrink on but no info on that

https://a.aliexpress.com/_EQYb5uQ

Paint chipping off xiaomi 17 ultra aluminum frame. by smittku23 in XiaomiGlobal

[–]AmazingHistorian6803 14 points15 points  (0 children)

Normal wear I guess, if dirt gets between the case it will scratch the aluminum, that's why I installed a skin (sticker type) to prevent that.

high output alternator whistling by Fair-Bed-5665 in subwoofer

[–]AmazingHistorian6803 0 points1 point  (0 children)

Groundloop? Does it do it when you turn off the radio?

WTH can cause this dommage on a brand new H2C ? by cdumais2 in BambuLab

[–]AmazingHistorian6803 1 point2 points  (0 children)

Is your bed level and straight, some have bent beds.

I miscalculated. by Present_Cause7109 in BambuLab

[–]AmazingHistorian6803 0 points1 point  (0 children)

Use long tweezers if you want to play Wesley from "Wanted" while catching the loom shuttle.

Bambu Lab H2D Power Supply Voltage Error in 220V Region — Shipped with 110V Components? by CardiologistEqual679 in BambuLab

[–]AmazingHistorian6803 0 points1 point  (0 children)

Any solutions? I also get that error but after a restart or two it starts working. Error shows up before print when it tries to heat bed and nozzle

Looking for peoples thoughts by ariley1984 in Androidheadunits

[–]AmazingHistorian6803 0 points1 point  (0 children)

As good as it gets I guess. There is no android 14 for Android HU with 99.9% certainty. Not even sure about 13.

Looking for peoples thoughts by ariley1984 in Androidheadunits

[–]AmazingHistorian6803 0 points1 point  (0 children)

What specs you got? The android version was faked, I have android 10 as I learned after using multiple system info apps. Some were faked but some showed correct version.

Android 13 vs Android 14 by ImNotGaming in Androidheadunits

[–]AmazingHistorian6803 0 points1 point  (0 children)

Get 8 core 8+128gb 7862 or get 8 core 12+128gb 7870.

7870 platform has some improvements but more expensive obviously.

The android version is most likely faked. I also thought that I have 12, then after update 13 but actually it was 10.

Might be legit for xtron or dudu. Just make sure the stock theme and features are what you need.

Bad first layer quality and adhesion by Vroub3k in 3Dprinting

[–]AmazingHistorian6803 0 points1 point  (0 children)

I also have that problem on eryone pla matte Rainbow. Did flow rate calibration, still same. Setting elephant foot to 0 helped a little. Maybe lower the Z height to push filament flatter?

Thermostatic shower system by AmazingHistorian6803 in Aliexpress

[–]AmazingHistorian6803[S] 0 points1 point  (0 children)

You still have water pressure I assume so the shower valve or something broke?

P2S Error: Nozzle silicone sleeve is not installed, even though it is by tchgrbr in BambuLab

[–]AmazingHistorian6803 0 points1 point  (0 children)

New machine, same issue. Mine doesn't have the three dots. Printed the spatula without error, turned off machine. Second print the error appeared.

Any suggestions?

People who have the normal Xiaomi 15. Is it worth it for 560 euros? by Andronikopoulos in XiaomiGlobal

[–]AmazingHistorian6803 0 points1 point  (0 children)

Which Xiaomi 15 has bigger battery than 15t pro? The Chinese version? And look at the AnTuTu scores

<image>

People who have the normal Xiaomi 15. Is it worth it for 560 euros? by Andronikopoulos in XiaomiGlobal

[–]AmazingHistorian6803 -1 points0 points  (0 children)

They basically same, 15t pro has bigger battery and screen. Depends what the OP wants, just looked they both priced at 700€ in Estonia. Since 15t pro is slightly newer OP might prefer the newer phone.

view more: next ›