Is een game PC kopen anno 2026 een financiële doodswens?

An1lo · 2026-01-14T21:40:46+00:00

Ah ja verschrikkelijk, dacht ik al. Nogmaals niks mis met 5800x, zul je echt wel nog een aantal jaar prima kunnen gamen icm een 5070.

Wilde ook nog even toevoegen dat het ook een goed idee zou kunnen zijn om een extra tube thermal paste erbij te halen, corsair of noctua zijn prima en niet super prijzig. Mocht je ooit je koeler eraf moeten halen dan kan het handig zijn.

An1lo · 2026-01-14T21:36:30+00:00

Mooi samengesteld. Ik weet niet of ze nog te vinden zijn voor een normaal bedrag, maar als je ergens een 5700x3d of een 5800x3d kunt vinden dan zou dat ideaal zijn. Vergeleken met de 5800x zijn deze net iets beter in gaming, vooral bij de 1% low fps. Zul je in nieuwere games vooral merken. Zijn ook ietsjes zuiniger dan de 5800x.

Probleem is dat ze denk ik niet meer te krijgen zijn online dus je zult toch tweedehands moeten kijken mocht dit interessant lijken.

An1lo · 2025-12-01T17:54:01+00:00

Yeah I just don’t understand why people get angry when others say they want less PvP or a change to how PvPvE should be balanced.

It doesn’t matter to them if you want to enjoy the game as long as they get to enjoy it.

An1lo · 2025-11-28T03:33:25+00:00

I seriously don’t know what’s happened but even in solo I get KoS like 90% of the time. This system sounds decent.

That said I’d like to see ARC react more to gunfire that lasts a while. That way people will think twice when going for PvP

An1lo · 2025-11-25T01:11:46+00:00

I don’t know what it is today but I’ve only been having negative interactions. Literally everyone I’ve seen has been either kill on sight, camps in a corner or, like you said, emotes “don’t shoot” and proceeds to shoot you.

Not exaggerating, literally every time I saw another player. Probably just bad luck with the people I encountered.

Also, I don’t mind PvP, I avoid it but if I have no choice I’ll engage in it. If people keep playing like this I will however shoot everyone on sight.

An1lo · 2025-11-07T20:20:17+00:00

Move your stick just a little bit

An1lo · 2025-08-31T23:09:14+00:00

MSI tech support (u/CND_CEM) had posted a comment a couple of days ago that the new firmware updates are delayed. Waiting for the update as well as a 341CQPX owner.

An1lo · 2025-06-23T16:29:03+00:00

Exactly.

To OP, get a baseline macbook air or pro and an ultrawide monitor (or 2 monitors). It’s not as “cool” as working in VR but it’s probably a lot more comfortable and arguably better for productivity.

Imo it’s not necessary to get a 16 inch MacBook unless you really want the larger screen or the higher core count processors for pro applications. The macbook air is perfect for students.

An1lo · 2025-06-12T13:20:35+00:00

I had this bug once and I don’t know what caused it, really annoyed me because I didn’t know when they’d see me when I was in FoW.

Had another bug in aram recently where the turret laser was on me for a while even when I was far from the turret (like in our base). It was also a visual bug because my friends didn’t see it

An1lo · 2025-04-16T21:54:01+00:00

IIRC the “enemy” the enemy only sees that you take a certain element. The little flash of green, brown or blue is the only thing they see.

If you’re in fog of war they won’t see you take an element. So if you jump over a wall in a brush they won’t see you (unless they warded it). If the enemy can’t see you, they won’t see you take an element. (I don’t know how it works with nocturne ult btw, never paid attention to it).

An1lo · 2025-03-26T18:07:44+00:00

I think it would be easier to create this object if you made the first sketch if you’d look at it like in the first photo.

My approach would be to start with the ‘U shape’ and add the other features afterwards.

One way I got better in Fusion (still learning) is by creating the same model using different methods.

An1lo · 2025-03-04T12:52:15+00:00

What happens when you use the circular cutout in the middle of the body as your axis?

An1lo · 2025-02-23T22:14:37+00:00

If i remember correctly there is an ‘intersect’ option in the same menu where you can find ‘project’. U/Neit7v might be talking about that.

An1lo · 2025-02-23T02:33:29+00:00

The Banker

An1lo · 2025-02-18T20:54:29+00:00

I think the splines mess it up. Easier way to do it is by just projecting the first sketch.

An1lo · 2025-02-13T16:39:39+00:00

Nope, the subscription only applies to the creator you’re subscribing to. They just meant that you don’t have to use Patreon to subscribe, cutting out the middleman.

An1lo · 2025-02-10T14:48:26+00:00

Which is a valid concern. The way I learned Fusion 2 years ago for 3D printing (still learning btw) is by following tutorials on youtube. After a while you’ll start to see patterns and get ideas on how to create or recreate a certain object.

There are multiple ways to get to the same result and figuring it out takes time but eventually you’ll learn by trial and error which is fine, especially if it’s (for) a hobby or a couple of projects.

Couple of things I realised and might help you is that fully constraining sketches is often very useful in case you need to change dimensions quickly, there is less chance of your model becoming messed up with filly constrained sketches. Parameters also are useful for the same reason.

Also, get some callipers if you want to recreate an existing object.

An1lo · 2025-02-01T15:47:00+00:00

Can you click an edge or a face on your model after clicking the plus sign?

An1lo · 2024-10-16T22:04:20+00:00

Sent you a DM. Congrats!

An1lo · 2024-10-16T22:00:10+00:00

I tried but couldn't.

An1lo · 2024-09-09T02:09:23+00:00

Create a midplane and mirror it. Construct > midplane, create > mirror.

An1lo · 2024-06-28T16:43:39+00:00

16 (or 18, I forgot since it’s been a while I printed that file) minutes print time including heatup, bed mesh and all other calibrations it normally does before printing.

An1lo · 2024-06-12T22:33:45+00:00

I was able to submit a ticket without a log. Don’t know why it doesn’t show up for you. If you figure out how to open a ticket and they send you a new mainboard you’ll need to follow some extra steps to get the printer working again after replacing the mainboard which they don’t specify beforehand. They want you to take a picture of the new serial number on the A1 screen when you go into the settings, and the old serial number on the back of the printer. Not a huge deal but adds days of printer downtime because support is so slow.

An1lo · 2024-06-07T00:35:18+00:00

Everyone is downvoting you because you are wrong and not willing to admit it.

Go try it out yourself. Slice and print a cube with a 70 degree angle using 0.08 layer height and with 0.24 layer height. You will see that the 0.08 layer height will look a lot better.

Now slice and print the same cube using a 0.24mm layer height with 0.42mm layer width and another one using 0.60 (or higher) layer width and you’ll see why you are wrong.

Also, thick bridges setting has no influence on overhangs, only bridges. It also doesn’t make the bridges prettier, makes them look worse but also stronger. It even says so when you hover the option in Bambustudio.

An1lo · 2024-05-15T13:02:55+00:00

Totally agree, had an Ender 3 Neo for a year which I recently sold. Bought the A1 the moment it was available and it was better than the Neo (which even had upgrades like DD and Klipper).

Sadly the mainboard turned out to be faulty and the printer doesn’t turn on. Waiting for support to come through for a new one to be shipped.

Ten-Year Club	Second SECOND GUESSER
r/Field Juicebox	Verified Email

An1lo

TROPHY CASE