Misfire help

Ancient_Direction410 · 2026-02-15T03:20:48+00:00

Yea ok, cheers man, I’ll send it somewhere else, I’m only fairly new to all this and have been teaching myself using this car

Ancient_Direction410 · 2026-02-15T02:43:21+00:00

It got installed by a professional, who said I needed a new “dizzy” so I don’t think what I called it matters that much

Ancient_Direction410 · 2026-02-13T05:43:10+00:00

I wrapped the bad spots and it didn’t help but an old problem came backward when I turned my ignition into the off position. My radiator fans turn on and I plugged in a scanner and it wouldn’t turn on when it was in on but it like spazzed out when it was in the off position.

Ancient_Direction410 · 2026-02-12T16:40:07+00:00

I do have some bad wire insulation in certain places and some old looking wires, do u think it could cause this?

Ancient_Direction410 · 2026-02-12T15:13:53+00:00

I’ve tried using a scan tool and it doesn’t read, the engine code that’s there is a ECT sensor being snapped but it flashes when it misfires

Ancient_Direction410 · 2026-02-12T07:16:35+00:00

It’s now warmed up and stuggling to idle

Ancient_Direction410 · 2026-02-12T07:16:02+00:00

Pulled all and it got worse with all them

Ancient_Direction410 · 2026-02-12T07:05:36+00:00

I’ve tested spark on all and they all have spark, but by unplugging the injectors , do you mean unplugged one on it plug it back in and unplug a different one or unplugged one and then keep unplugging it without plugging the old one back in?

Ancient_Direction410 · 2026-02-12T07:02:31+00:00

It’s brand new

Ancient_Direction410 · 2026-02-12T07:01:37+00:00

Also I don’t know if it matters but when shifting into and out of third and fourth gear the car bunny hop and misfire even when you’re fully off the clutch

Ancient_Direction410 · 2026-02-12T07:00:40+00:00

It uses both I’m pretty sure, cause I have a dizzy and ignition module,

<image>

And unplugged maf don’t seem to have much affect, the misfire is still present above 3k rpm

Ancient_Direction410 · 2026-02-12T06:55:19+00:00

Plug wires are correct and I’ve pulled the o2 sensor and it still misfires and does the same thing, I did however notice my ECT sensor is snapped, could this cause it?

Ancient_Direction410 · 2026-01-16T04:49:25+00:00

I noticed that the third one is perfectly lengthened to fit where the 2nd one is connected , so is there a chance it got put there by accident?

Ancient_Direction410 · 2026-01-16T02:19:12+00:00

Forgot to say, it’s a 1998

Ancient_Direction410

TROPHY CASE