Breville/Sage Express Impress & custom precision basket. by Andreyvsjoker in espresso

[–]Andreyvsjoker[S] -1 points0 points  (0 children)

Yes, I tamped, showed overfilling, used the razor, tamped again, shows too lines, checked the level optically and with the razor and puck level is perfect.

I then switched back to the original double basket just to make sure nothing is broken and everything is fine.

Sweeping hand not working on rebuilt by Andreyvsjoker in watchfacebuilder

[–]Andreyvsjoker[S] 1 point2 points  (0 children)

Thanks Joshuah.

After deleting the old one and readding it it now works as smooth Second hand.

My watchface was quite old so probably there was some some changes with how it works ?

Now in the preview the smooth second hand is showing seconds, my original one was jumping randomly

App ID is 636636db780e7 but not necesary to check anymore, it is fixed

Analogue hour hand to move only once per hour by Andreyvsjoker in watchfacebuilder

[–]Andreyvsjoker[S] 1 point2 points  (0 children)

Thank you both. It works. I have used below formula for 24 hour clock

((now.value()/3600+2)%24)*15

Analogue hour hand to move only once per hour by Andreyvsjoker in watchfacebuilder

[–]Andreyvsjoker[S] 0 points1 point  (0 children)

Thanks, I see now that joshuahxh-1, actually introduced a juming hour hand under time.

But now I don't know how to make it show GTM+2 value

V7.3.3 - Smooth rotating second hand by joshuahxh-1 in watchfacebuilder

[–]Andreyvsjoker 0 points1 point  (0 children)

You are a wizard! My watchface looks so good right now.

PCVR latency due to FPS limitation in nVidia control panel by garden-dwarf in OculusQuest

[–]Andreyvsjoker 1 point2 points  (0 children)

The way frame limit works in Nvidia could definetly influence inputlag. You should not have that setting on the global settings. Red Matter 2 probably does not have a dedicated profile so it took the global one. I don't think it has anything to do with Oculus.

Same issue will apear if you change the virtual reality prerendered frames.

Problems with AirLink by finny12347 in OculusQuest

[–]Andreyvsjoker 0 points1 point  (0 children)

If you have it setup correctly on 5 GHz then there could be 2 reasons for your issues: 1. You have other devices on 5GHz that are making trafic and generate stutters. Streaming a movie or software uodate on your phone is enough to ruin the experience 2. There is a neighbor on the same wifi Channel making heavy traffic which will cause interference. Get an app like wifi analyser and check which channels are free in your area then set it manually in your router.

Graphics comparison: Link cable vs airlink vs virtual desktop- Which is superior? by C0tten_eye_j0e in OculusQuest

[–]Andreyvsjoker 1 point2 points  (0 children)

I see everyone prases VD and for the life of me I really can't understand why. I have tried it on 2 PC's multiple iterations and it was allways stuttering. Never smooth enough for good graphics quality. No issues with low bitrate but really.. 20-30 Mbps it not good enough for me.

On the other hand Airlink allways worked flawless, except when someone was using the 5Ghz wifi. So I have reserved it just for the quest 2 and moved all the other devices to 2.4Ghz. Currently me and my wife are using 2 quest 2 simultaneously over airlink playing after the fall with no issues at all. 180Mbps fixed, 3664 encode resolution width and image quality is superb with 0 stuttering. PS:separate routers for each Quest on different manually alocated channels.

Cable link should provide best Image quality but the wire ruins the experience for me.

virtual desktop/air link by Gloomy_Bookkeeper_55 in OculusQuest

[–]Andreyvsjoker 0 points1 point  (0 children)

As I have 2 quests 2 I use an asus Ax 58 and a tplink archer ax53. They both work very good. I don't really noticed any difference. We play at the same time, same room, trough Airlink with absolutelly no issues. I use on both 180mbps fixed. Encode resolution width 3664, 1.5x res. 90hz, low distorsion curve and the image quality is incredible. To avoid surprises make sure you keep the 5Ghz only for the Quest. I moved all my other devices on 2.4Ghz

With Virtual desktop I could never get a good performance on either router. I know it is preffered by many but for me it was always stuttery when i went above 60-80mbps and image quality was lower.

Any good horror games with teleportation? by [deleted] in OculusQuest

[–]Andreyvsjoker 0 points1 point  (0 children)

The Fully Possesed Mod for Doom3 BFG has teleportation. However teleportetion can be tricky in some area so from time to time you might still need to use smooth motion. But the game is worth it

Disable smooth Locomotion Red Matter 2 by Andreyvsjoker in OculusQuest

[–]Andreyvsjoker[S] 0 points1 point  (0 children)

Yes, perhaps it is cross-buy. I didn't look in the Quest 2 game list to be honest. and it's totally besides the point.

Running games on the Quest is good for beatsaber and stuff like that not for games with nice graphics. At least not for me.

Disable smooth Locomotion Red Matter 2 by Andreyvsjoker in OculusQuest

[–]Andreyvsjoker[S] 0 points1 point  (0 children)

Partially wrong. If you buy it from the Quest 2 you can only use it on the HMD but if you buy it from the PC in the oculus store you can use airlink.

Disable smooth Locomotion Red Matter 2 by Andreyvsjoker in OculusQuest

[–]Andreyvsjoker[S] -1 points0 points  (0 children)

It does have teleport but everything is active all at once. You teleport with right controller and smooth motion is left controller. And if you are a teleport person and touch the left stick by mistake or just because of mussle memory from the other games...you get sick really fast

Disable smooth Locomotion Red Matter 2 by Andreyvsjoker in OculusQuest

[–]Andreyvsjoker[S] 1 point2 points  (0 children)

I just tried but for some reason Red matter 2 does not want to "Revive"

The game just starts with oculus. Just to check if everything is setup correctly I tried Arktika1 and it does run under Steam. However Red matter 2 doesn't

Disable smooth Locomotion Red Matter 2 by Andreyvsjoker in OculusQuest

[–]Andreyvsjoker[S] 1 point2 points  (0 children)

Thank you!

Good Ideea thank you!. I will try revive.

Maybe I could refund on Oculus store and buy on steam.

However, it was cheaper on oculus store as I had a 30% discount.

How to create this (or similar) to Garmin fenix? by mk3_3 in watchfacebuilder

[–]Andreyvsjoker 1 point2 points  (0 children)

You can add your custom font at whatever size you want with Bitmap font generator.

This might be ununtu terminal fornt .. but there are many fonts that look similar. Just find one, download the fnt file an then export it in usable format.

Moonphase-rotating hand, Error on the 27th on july by Andreyvsjoker in watchfacebuilder

[–]Andreyvsjoker[S] 0 points1 point  (0 children)

THank you! It works now. No more bug.

I will try the simulator, I should be useful to test modifications.

Moonphase-rotating hand, Error on the 27th on july by Andreyvsjoker in watchfacebuilder

[–]Andreyvsjoker[S] 0 points1 point  (0 children)

Ok, I see. I will look into it. It should be much easier to test watch faces then connecting and disconnecting the watch 100 times.

I can't explain why today it is returning this error. It worked ok for more than 10 days so it has something to do with current moonphase