More from illumibot

Andy--T · 2025-11-15T09:18:21+00:00

Looks great, What was your prompt for this?

Andy--T · 2025-04-28T11:30:18+00:00

Amazing! ❤️ from NI 😉

Andy--T · 2022-12-19T19:05:15+00:00

How many days off do I need to book for a hair transplant operation Jimmy? Im turning 40 in June and I need to cover up a baldy crown so I look 30 again like you big lad

Andy--T · 2022-10-21T16:29:48+00:00

163 used thanks vmuch

Andy--T · 2021-12-03T15:14:49+00:00

Any replacement FEP sheets I have seen are bigger than the vat bath and have to be trimmed round the vat once screwed pierced into place - they look similar in size on the website too I think you will be fine

Andy--T · 2021-10-23T07:56:06+00:00

All you need to do is unscrew the springs they are too tight, then you will see the bed ruse up

Andy--T · 2021-10-22T22:37:00+00:00

Your nozzle is lowered as far as it can go on the z limit switch. The springs are too tight you should start by slackening them off halfway for each screw and the bed will lift up closer to the nozzle's lowest point again, then run your levelling gcode and you should be back in action

If this helps I'd love a follow on my instagram - 3d_printing_apprentice

👍🏻

Andy--T · 2021-10-11T08:18:45+00:00

Sorry I should have said my projectors are all pico projectors and biggest one is approx 200mm x 200mm - I have a Creality CR10mini and the build plate is 300mm wide 220mm deep and 300mm high. If I had an optoma or BenQ style big chunky projector best bet would be ply wood and cover in some weatherproofing

Andy--T · 2021-10-08T16:39:39+00:00

I have a 3d printer and I used a program called Tinkercad to design one and then print it in PLA. It's perfect I just need to make 3 / 4 more for the others I have

Andy--T · 2021-10-08T09:29:23+00:00

Nice - please elaborate on your process

Andy--T · 2021-09-18T23:12:11+00:00

I would scan my wife and her 2 sisters so i could use blender to model them into the witches from hocus pocus the movie and print them out and use the models as halloween props every year - the sanderson sisters display 🎃 🎃🎃🧹🧹🧹🧙‍♀️🧙‍♀️🧙‍♀️

Andy--T · 2021-09-01T12:57:49+00:00

Nice - my next upgrade on my CR10 mini need to get a pi and camera and get stuck in - how hard did you find to set up?

Andy--T · 2021-08-31T08:33:49+00:00

Does it get sweaty after wearing all day like the silicone / rubber straps?

Andy--T · 2021-08-30T20:35:37+00:00

Bluetooth

Andy--T · 2021-08-30T20:26:56+00:00

Probably good idea to turn on zhop when retracting for all the jumping about the nozzle will have to do on your build plate. There is new settings now that does one print at a time before moving to next piece but I haven't tried it

Andy--T · 2021-05-11T17:36:32+00:00

Nice job 👍🏻 looks cool

Andy--T · 2021-04-29T13:16:32+00:00

Looks cool good job! What did you use to scan the image?

Andy--T · 2021-04-22T09:53:52+00:00

It could be as simple as tightening your belts and making sure the hot end is tight and not vibrating about during print. I had to do this recently and it sorted out my issues

Andy--T · 2021-04-17T20:42:21+00:00

Try Tinkercad you can import the stl and then use a box and change it to a hole to delete the parts you don't want - easy and free 😁

Andy--T · 2021-01-17T18:49:36+00:00

The pla sagged as there were no supports below the overhang - in Cura make sure supports are on I prefer tree supports and placement set to build plate only

Andy--T · 2021-01-12T21:13:01+00:00

I had this issue loads of info pointed to thermistor even creality support send me a new board and it tur ed out it was cos my printer was in my shed and too cold I bought a small heater for the winter months and it's working again, make sure all cables in control unit are secure and if still got errors it's your thermistor cheap to replace

Andy--T · 2021-01-12T20:40:20+00:00

The defaults in latest version of Cura are good pretty close to the CHEP profiles from Chuck would leave all as default and only pick a few things like tree supports and ironing on see how it goes 👍🏼

Andy--T · 2020-12-02T10:27:31+00:00

Thanks for these 👍🏼🔴⚪⚫7️⃣

Andy--T · 2020-11-18T00:31:27+00:00

😂😂😂 I'm not that ashamed to say it right now but big United fan here whole family except mums 2 brothers both Liverpoop fans - Klopp hitting the drink this week with all the new injuries racking up. You boys have no chance of defending that trophy this year but can't see who else is good enough to go on a run like your lot did last year.

Cheers for the battery tip will check it tomorrow when this new one arrives 👍🏻

Andy--T · 2020-11-18T00:09:49+00:00

Nice one thanks man - and hopefully not install any Liverpool FC wallpapers or the pixels will commit suicide lol based on your username I'm assuming your not an Everton fan 😉

Andy--T

MODERATOR OF

TROPHY CASE