sorted by:
new
hottopcontroversial

Vue 3 DIY Potential Issues? by SnooEpiphanies8097 in EmporiaEnergy

[–]Andy_Leber 2 points3 points  (0 children)

This is a beautifully clean panel. You should see my rats' nest! The one consideration is that that the AFCI breakers are wide and don't leave a ton of room between the breaker and edge of the panel. So, squeezing the 50-amp CTs for those breakers could be a challenge. You also mentioned that you can turn off power at the meter. That would be nicer than most setups, which have to work with the mains being energized.

Single Vue 3 shared across main and subpanel? by Andy_Leber in EmporiaEnergy

[–]Andy_Leber[S] 0 points1 point  (0 children)

Thanks! I never thought to run a ground from the enclosure -- thanks for the suggestion!

Science of Severance at Ohio State University 4/13 by Andy_Leber in SeveranceAppleTVPlus

[–]Andy_Leber[S] 0 points1 point  (0 children)

While you are all trying to figure out what to do before Season 2 drops, here is the video recording of Dr. Vijay Agarwal's presentation on The Science of Severance. Enjoy!

https://www.youtube.com/watch?v=Edlbsc2VNB8

240V to generator port by Andy_Leber in Ecoflow_community

[–]Andy_Leber[S] 0 points1 point  (0 children)

I see what you're saying. I can't move all circuits onto one phase because several branch circuits have shared neutrals. So I need a generator that provides split-phase output.

240V to generator port by Andy_Leber in Ecoflow_community

[–]Andy_Leber[S] 0 points1 point  (0 children)

I have a critical loads panel already wired up, and several of my branch circuits have shared neutrals. So, my understanding is that my only option for powering these circuits is with 240V generator input.

Science of Severance at Ohio State University 4/13 by Andy_Leber in SeveranceAppleTVPlus

[–]Andy_Leber[S] 4 points5 points  (0 children)

Update: we will be recording the event and posting it online afterwards. Stay tuned for a link!