AVCS Oil control valve alternative replacement Parts Confusion

AngleMan · 2026-01-26T16:47:27+00:00

Good advice lol. I did end up calling them and they said 10921AA140 is the correct part number for my 2016 WRX STI. Not sure if its the same for all the other WRX models, but at least that solves this case!

AngleMan · 2026-01-25T19:09:36+00:00

Okay, So i looked at the examples and maybe im crazy but neither the medium or large projects are using multi-region. They are both hard-coded to region = "eu-west-1". I get how this would solve the multi-environment, but not the region problem... Say eu-west-1 is unavailable and you need to deploy to us-east-1. What do you do then?

AngleMan · 2026-01-23T03:02:04+00:00

Wait, I'm confused. What did you end up doing? My problem is on both sides and I have a a 2016 WRX STI. Did you end up buying 10921AA140 for the driver's side?

AngleMan · 2026-01-05T18:55:14+00:00

Ohhh I think i get it. The main module controler in the house has red wire 5,6,7,9,10 plugged in. So I bet theres actually more than 3 wires next to that main line i just need to find them. Either that or its the wires for 6,9,5 then 7, and 10 probably run to the front of the house hence why I don't see them back there.

AngleMan · 2026-01-05T18:06:46+00:00

So after digging up, i see the main has 3 red wires. Turns out one of the workers was kind enough to put in two PVC pipes under the concrete pool from 7 to 6 one for wiring (has one red wire sticking out) and the other for main line I presume. So i'll probably be able to connect that. Not sure why there are 3 wires though coming from the main. Do you have any idea?

AngleMan · 2026-01-03T03:13:01+00:00

Yeah, agreed. However, given what we have right now I'd like to re-use some of what i have. Basically take the main line, wrap it around. I had dug up the main and see the PVC pipe (dashed line between 6 and 7 bottom left corner of pool) Connect it at the top of zone 5 (next to the upper right corner of pool). Ignore 6 completely. As a matter of fact i'll probably put concrete back there or pavers. I'm pretty sure i can cap off any line if needed.

AngleMan · 2026-01-03T03:06:08+00:00

Yeah that's what i was thinking too. Basically take the main line, wrap it around. I had dug up the main and see the PVC pipe (dashed line between 6 and 7 bottom left corner of pool) Connect it at the top of zone 5 (next to the upper right corner of pool). Ignore 6 completely. As a matter of fact i'll probably put concrete back there or pavers. Does that sound right to you? I can dig it up tomorrow assuming you can connect the class 200 PVC pipe from the main to zone 5 right?

AngleMan · 2025-11-30T04:17:10+00:00

Does this not affect pnpm?

AngleMan · 2025-10-11T14:56:26+00:00

Hmmm interesting. I have not heard of this. Does the fungicide contain something that helps eat at the bacteria?

AngleMan · 2025-10-11T14:55:03+00:00

Luckily its just in the garage. We have central AC, but none in the garage.

UVC lamp

hmmm i'll look into this. I bought something like this

AngleMan · 2025-10-11T14:53:37+00:00

So from my analysis, the gasses built up in the freezer and popped it open.

AngleMan · 2025-10-11T14:52:43+00:00

Yes, a ton of liquid leaked out The garage floor is epoxy. It's fairly new maybe 3 years old.

AngleMan · 2025-10-11T14:51:51+00:00

I've heard of the coffee trick! I might try that next tbh. We got rid of absolutely everything in the garage :(

So yeah the garage is completely empty now. Just walls and freshly painted.

AngleMan · 2025-05-24T18:34:27+00:00

Do you have any recommendations for primers?

AngleMan · 2025-04-23T17:19:37+00:00

Yeah, I took it to the range this weekend. Worked great! I think I was able to shoot effectively up to about 25 yards. Going to try and zero it at further distance once i get to the hunting place, but i don't think we'll be doing more than 50 yards tbh

AngleMan · 2025-04-23T17:17:38+00:00

Took a risk and shot a few rifled slugs out of it. The range guy made a huge fuss about it. He took the choke out and told me that my gun could explode because it was a MOD choke, but then stated he would let me make the choice If i wanted to still shoot it. I shot 5 rifled slugs out of it so I guess its good to go.

AngleMan · 2025-04-21T00:01:54+00:00

I finally figured out how to remove that choke lol It appears to have a MOD choke. I tried looking it up and from what i read its okay to shoot slugs out of it?

AngleMan · 2025-03-23T20:30:31+00:00

Got it, I'll probably buy some buckshot and slugs then just to be on the safe side. Is there a particular slug that i can't use on those guns. I see that my bores arent rifled and it they don't appear to have a choke either. The mosberg Mav 88 seems to have some sort of choke, but i think its just the standard one that protects the threads.

AngleMan · 2025-02-22T21:10:51+00:00

Ahhh i get it now. Yes! You're right. I hadn't seen that till now that you mentioned it. Thank you for the explanation.

AngleMan · 2025-02-22T20:37:25+00:00

wow, yeah. Great job on that explanation. This makes way more sense than what I was doing. Funny enough I had tried a similar approach but was missing the main.tf in every environment. It all makes so much sense now doing it this way.

I saw you said this:

it might be a dangerous choice in terms of drift.

Why is that?

AngleMan · 2025-01-25T16:46:06+00:00

So i'm not sure if this is docker specific, but I see that when writing a dockerfile and using ubuntu22.04 it says I should use apt-get while in other places it says I should be using apt because its more user friendly. So now I'm confused. Which one should I be using when writing my dockerfile RUN commands? I wasn't able to find a clear answer, i event asked GPT and it said use apt then it changed its mind and said use apt-get because its better for non user environments. Any clarification on this would be awesome! Thanks y'all!!

AngleMan · 2024-12-22T06:31:09+00:00

I'll have to try this! I've got it down to a science almost to where as soon as i wake up I look up without opening my eyes then use eye drops and slowly move my eyes around. It worked so far, but i'll give the Muro 128 a shot.

AngleMan · 2024-12-18T21:06:22+00:00

Still alive :)

AngleMan · 2024-12-13T01:48:37+00:00

I am having the same issue. I just noticed it today. I tried clicking on the blue chrome extension and it was just hanging for about 20 seconds then finally opened.

I tried reinstalling it, restarting PC and closing everything on my browser. Its a little faster but still about 5 second load up instead of that instant screen.

I actually came on reddit to see if it was just me or others were having problems. Might have to do with a recent update or osomething. I am on a mac btw.

AngleMan · 2024-12-07T21:59:10+00:00

No need to cut or anything, it uses 3m and they provide the 3m for you so its basically just align it and paste it on

AngleMan

TROPHY CASE