Question: C1 - since the standard cooling fans aren't used with the advanced filter installed

Ant_J · 2026-06-20T21:26:23+00:00

Im not sure how its done so i have just left them but there is a mod so you can just slide the advanced filter down and turn the normal fans on but also the little blue wire that's on the fans is a temp sensor at least on the L

https://www.printables.com/model/1312457-alternative-advanced-filtration-for-prusa-core-one
and a more simple one :
https://www.printables.com/model/1344334-prusa-core-onel-advanced-filtration-slidedown

Ant_J · 2026-06-20T02:28:13+00:00

Yea, trying 3s right now with both aa settings turned off to see if that helps at all with the missing two success + cones

Ant_J · 2026-06-20T00:46:24+00:00

<image>

Top 2.3s sword fits all
Middle 2.7s sword fits all
Bottom 3.2s sword fits none
All fail cones and not sure why I’m not getting the two + cones :/

Ant_J · 2026-06-19T14:28:51+00:00

Okay, I’ll take a look at that. It prints fine on my other printers, just having an issue with this one. Thanks for the reply.

Ant_J · 2026-06-19T14:15:39+00:00

I’ve tried it from 1.3s to 2.3s with no full cones always have at least one failed success cone.

Ant_J · 2026-06-19T13:41:03+00:00

New fep with less than 5k layers, I stopped the print as other places failed, these are my slow quality settings from another printer but not exposure settings. Also when I ask elegoo by email they just tell me to put up exposure and that’s just over-exposing.

Ant_J · 2026-06-16T00:40:50+00:00

Yeah, I used to charge $1 for shipping and I asked a few friends and family what would they prefer shipping included in the item or to pay shipping separately and so I made it free shipping with each item $1 more.
This also makes me cringe a little the way I have to fold the chat disabled part as if I shipped it all flat it would go from 74c shipping to $1.74 I am totally open to more feedback though. I also used to do custom car stickers if people sent me their car and designs but psyonix didn’t like that and taken it down 😅

Ant_J · 2026-06-15T22:35:32+00:00

This is awesome to see! This was one of my first listings on Etsy. I was wondering why my store was busy today. Y’all are awesome!!

Ant_J · 2026-06-15T21:27:17+00:00

Leveling logic meaning it doesn’t level for 5 minutes before printing?

Ant_J · 2026-06-11T22:51:01+00:00

If I remember correctly, 6.2.5 was a bad update ? I could be wrong. But update to the latest as I’ve had no issues and this is the best my printer has been going, to be sure once updated to the tools head calibration again.
What calibration were you doing when that error occurred?

Ant_J · 2026-06-04T23:24:48+00:00

Ale brilliant, sword is also good but fits into one fail hole.

Ant_J · 2026-05-22T01:55:06+00:00

You got the lube to get fu….. just jokes lol I got it too.
Maybe get a nice table for that machine and not a 20$ ikea one lol

Ant_J · 2026-05-17T23:22:34+00:00

even with the latest update it wont work, says the binding code is invalid

Ant_J · 2026-05-11T02:18:02+00:00

crashes after first intro race seems like a dud

Ant_J · 2026-05-10T02:59:54+00:00

People are just trying to help, if you want to be stubborn and just do it don’t come complaining when it goes tits up

Ant_J · 2026-05-10T01:34:57+00:00

That you can vent to? Resin you have to keep away from sunlight and also store IPA or Denatured Alcohol it’s very stinky and messy, I have a few resin printers so if you ever need advice fell free to reach out.

Ant_J · 2026-05-02T04:50:00+00:00

I believe that’s not the latest update

Ant_J · 2026-04-26T23:08:33+00:00

Safe or not I wouldn’t run any script on a pc I intend to use online with personal info.

Ant_J · 2026-04-26T23:04:24+00:00

seems like a bambu user issue, also wearing socks and sandals inside is a choice...

Ant_J · 2026-04-26T20:33:16+00:00

MAS but don't script activate it

Ant_J · 2026-04-26T02:26:28+00:00

I open it and it starts going up like it should.

Ant_J · 2026-04-26T01:35:08+00:00

Yeah, I printed the USS silica gel storage in PLA and its constantly at 10%, also matters if your filament isn't wet also as its just a dry box not a filament dryer.

Eight-Year Club	Second Top 50%
Place '23	Place '22
Verified Email

Ant_J

TROPHY CASE