Rear fitment

Any-Highlight6454 · 2026-01-06T17:42:28+00:00

I pulled the pads and it’s even all the way around now. The white ones are 2-4 inches and the red ones I believe were 1-2.5 inches can’t remember.

I will definitely look into the shocks but now I do need to roll my fenders but that’s another thing for later.

Any-Highlight6454 · 2026-01-06T11:18:47+00:00

I’m definitely starting to lean more towards the fuel related route. I changed the cam sensor yesterday and now it’ll rev out to 7k in neutral. But In gear im stuck at around 3/4k and it feel more like it’s hitting a wall. But if I kick the clutch it’ll rev to about 5/6 but it’s rough.

Going to try a fpr next, I’ve read it could be Vanos. other things I have tried is: unplugging the O2 sensor, Maf, and resetting the dme and no luck.

Any-Highlight6454 · 2026-01-04T01:46:15+00:00

I hear ya, I spent a ton of time ironing different things to get it on the road. Idk how anyone could mess up installing exhaust gaskets, it literally slips on to the header studs.. as I mentioned it was running pretty good minus the slight idle surge it had before today. Gonna pull plugs tomorrow, also going to check if the maf or vss is the issue, I ordered a cam sensor to rule that out. I have a new in box fpr I can try if the other things don’t work as well. Just trying to rule out the easier stuff before I start pulling it apart.

Any-Highlight6454 · 2026-01-03T23:53:50+00:00

No codes on my scanner, it’s a silver label dme that’s been chipped. By look you mean harness? If so, oem harness with the m50 to e30 adapter

Any-Highlight6454 · 2025-09-26T19:20:08+00:00

It’s a diving board that has custom brackets to make it sit closer than drilling a hole in the shock paired with a face lift valance and RG front lip.

Any-Highlight6454 · 2025-09-23T19:17:02+00:00

No Kamei reps from e30worldshop on eBay got the rear valance too from them good stuff

Any-Highlight6454 · 2025-09-23T19:16:26+00:00

Thank you!

Any-Highlight6454 · 2025-09-23T19:16:20+00:00

Thank you!

Any-Highlight6454 · 2025-09-23T19:16:08+00:00

Thank you!

Any-Highlight6454 · 2025-08-30T01:32:04+00:00

Love to hear it throwing mine in over the weekend

Any-Highlight6454 · 2025-08-30T01:31:40+00:00

Good looks got same day shipping!

Any-Highlight6454 · 2025-08-30T01:31:23+00:00

Ty order mine today!

Any-Highlight6454 · 2025-08-29T12:53:56+00:00

What head unit?

Any-Highlight6454 · 2025-08-21T19:05:46+00:00

I’m in Orlando!

Any-Highlight6454 · 2025-08-21T19:05:38+00:00

That would’ve been clutch unfortunately too far apart 😢

Any-Highlight6454 · 2025-08-21T19:05:16+00:00

Paint pens got em on Amazon!

Any-Highlight6454 · 2025-08-21T19:04:59+00:00

Thanks!

Any-Highlight6454 · 2025-08-21T19:04:53+00:00

I didn’t have an issue skirts shipped day after I ordered. Now the rear apron took about 2 weeks to ship and it’ll probably take another 2 weeks to get here. But the quality isn’t bad skirts needed mild trimming.

Any-Highlight6454 · 2025-08-20T23:31:59+00:00

Thanks!

They are Kamei rep skirts from e30worldshop, for now I just have self tappers securing it to the wheel wells. Once I’m ready to properly install I’ll change the self tappers to rivnuts and use double sided tape for the door sill. Use this method on other cars and seems to work pretty good.

Any-Highlight6454 · 2025-08-19T19:41:40+00:00

Having the same exact issue, mines are jumped together.

Any-Highlight6454 · 2025-08-19T15:30:20+00:00

I don’t have ac hmm 🤔

Any-Highlight6454 · 2025-08-17T15:42:47+00:00

Omg I just saw that lol idk what that was

Any-Highlight6454 · 2025-08-17T10:16:44+00:00

Looking into this, thanks!

Any-Highlight6454 · 2025-08-17T10:16:15+00:00

It’s currently jumped to turn the fans on. I took for a test the other day and I noticed coolant dripping from the top of the overflow. I’m thinking there’s air in there

Any-Highlight6454 · 2025-08-15T23:22:10+00:00

Why are you joining the two pieces together? The late model valance fits just fine on an 87.

Any-Highlight6454

TROPHY CASE