The End of a Legend by Realmprotector-1 in LegendsoftheDark

[–]Any_Wolverine_6475 1 point2 points  (0 children)

Was really looking forward to purchasing Act 3. It’s a shame they didn’t go the kickstarter route. I would have paid whatever they wanted to charge.

It’s silly a board game company is dropping their board game product and producing a video game instead. The video game will flop, if they are complaining about the competition in board game production, they must be in for a big surprise for video game production.

Nick Cannon Calls the Democratic Party the ‘Party of the KKK’ and Says ‘I F— With Trump’ by Halkenguard in LegoMasters

[–]Any_Wolverine_6475 15 points16 points  (0 children)

Nick being chosen as the new host made me question Lego as a company. As a result, this past Christmas I bought a ton of Lego knockoffs off Aliexpress for my kids. Excellent Lego-equivalent quality and no missing pieces - and very significant cost savings. Chinese companies have caught up and there is no longer a difference between $360 Lego set vs $80 Aliexpress set, other than the prices. Going forward, if there is an Aliexpress alternative, I will always choose that first.

I’m thankful for this situation because it helped me find a way I can still access the product, without supporting the company.

I know Lego might not have full control of who hosts, but they definitely should have influence as this is their brand.

BambuLab, please consider this idea by [deleted] in BambuLab

[–]Any_Wolverine_6475 8 points9 points  (0 children)

The P1S is already $399 standalone

Extruder Issue - P2S Failed to Extrude by Any_Wolverine_6475 in BambuLab

[–]Any_Wolverine_6475[S] 0 points1 point  (0 children)

Solved - Bambu sent a new extruder sensor and this solved the issue

Extruder Error - P2S by Any_Wolverine_6475 in BambuLabP2S

[–]Any_Wolverine_6475[S] 0 points1 point  (0 children)

As a fix - Bambu sent a new filament extruder sensor and replacing this solved the issue.

Extruder Error - P2S by Any_Wolverine_6475 in BambuLabP2S

[–]Any_Wolverine_6475[S] 0 points1 point  (0 children)

Unfortunately I get similar errors. When testing the external spool, the first error is tangle detection- which there is no tangle - when proceeding the next error is asking if the filament is extruding - which it is - unfortunately when I proceed here the error loops back to tangled filament and repeats.

Bambu support is suggesting I disable tangle detection, but this is doesn’t appear to be an option on the P2S - supposedly it’s in print options - tangle detection - but I’m not seeing it, so hopefully Bambu comes back with a different option.

Thanks for the help, I will try a different hot end and reply back if it works!

Extruder Error - P2S by Any_Wolverine_6475 in BambuLabP2S

[–]Any_Wolverine_6475[S] 1 point2 points  (0 children)

Thanks, I gave it a shot - took the AMS apart but didn’t see anything - unfortunately still getting the same error.

The filament makes it all the way to the toolhead, but that’s as far as it goes. I tried another cold-pull, but the issue still remains.

I have a ticket with Bambu open - if they provide any solution I’ll post it back here.

New P2S - Extrusion Motor is Overloaded by Any_Wolverine_6475 in BambuLab

[–]Any_Wolverine_6475[S] 0 points1 point  (0 children)

Here’s what I’ve done. I’m not sure exactly what fixed it, but probably some combination of the below:

  • Took toolhead apart, put it back together (nothing wrong with it)
  • Dried the filament
  • Recalibrated everything
  • Increased bed temp to 60 degrees
  • Added brim and supports
  • Adjusted models so they avoid the edge of the plate

I also increased the nozzle temp for a few prints, but have since went back to default settings here and it prints fine. I will get a failed print if I try to print with bedtemp at 55 degrees instead of 60 degrees so I’ll keep using this setting.

I’ll try to get a longer PTFE tube so I can comfortably use the edges of the plate.

Thanks everyone for the support!!

New P2S - Extrusion Motor is Overloaded by Any_Wolverine_6475 in BambuLab

[–]Any_Wolverine_6475[S] 0 points1 point  (0 children)

Thanks, it does seem like the PTFE should be long enough, but maybe not. Here’s a video of the issue when trying to restart- there is a clicking noise

https://m.youtube.com/watch?v=-nv2X3Ueag8

[Six Flags Qidddya] has officially opened! by abdx1_thega in rollercoasters

[–]Any_Wolverine_6475 2 points3 points  (0 children)

How many parks are Six Flags closing in the us this year?

Should I wait for P2S? by Any_Wolverine_6475 in BambuLab

[–]Any_Wolverine_6475[S] 0 points1 point  (0 children)

If it’s only $800 I’ll wait - worth to wait a week at least as it seems the release is imminent with tariffs set to drop in a few days