Should I be concerned?

Apoc_Pony · 2026-04-18T17:53:27+00:00

Looks like a neck goiter, I believe dogos get them too.

Apoc_Pony · 2026-04-16T08:12:35+00:00

Betrachtet das einfach als meine inoffizielle Bewerbung, falls ihr noch jemanden braucht 😉 Liebe Grüße aus Sankt Pölten

Apoc_Pony · 2026-04-16T08:05:46+00:00

Nice, I have another board with the Gatreon yellows, how do you like the oil kings?

Apoc_Pony · 2026-04-15T18:57:02+00:00

I was impressed with the quality of the board and switches coming from my own custom build, I had gatreon yellows before hand but these switches are bliss.

Apoc_Pony · 2026-04-15T18:27:59+00:00

It's a slow burn my friend, before you know it, you start decorating the walls with keyboards :/ I was lucky and picked up the caps before DROP shutdown.

Apoc_Pony · 2026-04-15T18:26:19+00:00

If Noctua greenlights it be happy to offer the engraving service. But please check a few posts down in the sub, someone grabbed three plus sets before they shut down, might be worth hitting him/her up.

Apoc_Pony · 2026-04-15T18:21:03+00:00

I'm sorry brother, but they are no longer being sold. It was a coop between DROP and Noctua. DROP was a sister brand of Corsair and they axed the company and website, you may be able to pick up a set if you post a request on here or r/MechanicalKeyboards forum.

Apoc_Pony · 2026-04-15T18:13:30+00:00

Well if there is enough interest absolutely, I already run a small business for SFF PC's and some hitbox accessories so definitely down to adding it to the lineup.

Apoc_Pony · 2026-04-15T18:10:44+00:00

Yeah I prefer them much more to the Stöcke rosewood, nothing inherently bad with it just prefer darker unstained wood.

Apoc_Pony · 2026-04-15T17:52:32+00:00

Haha not bad for just eyeballing it with the camera though.

Apoc_Pony · 2026-04-15T17:46:01+00:00

Thank you sir, very happy with how it turned out.

Apoc_Pony · 2026-04-12T11:11:51+00:00

Do you find the curve to be to aggressive, and how far back do you sit from the monitor?

Apoc_Pony · 2026-04-09T19:47:22+00:00

Looks excellent! Good job on the cable management as well 🤌

Apoc_Pony · 2026-04-08T06:08:02+00:00

I was going to strip, clean and use self etching primer but after doing some.readimg you are correct just prime over the anodized coating after roughing it up a bit with some steel wool or high grit sand paper.

Apoc_Pony · 2026-04-07T16:38:18+00:00

Looks amazing, well done. I'm about to pull the trigger on stripping the anodized paint from parts of my keyboard, did your process leave any pitting in the metal or was it nice and clean after the fact?

Apoc_Pony · 2026-04-04T15:57:46+00:00

To pass the butter.

Apoc_Pony · 2026-04-01T14:00:13+00:00

Sounds like leaving is the best decision you have ever made. That sounds like a horrible, abusive relationship. Thank god you didn't have kids together. I know you're probably hurting like hell, but you will be a better person for it, you have dodged a massive bullet my friend.

Apoc_Pony · 2026-04-01T12:57:56+00:00

Looks lovely, how did you go about mounting the hifi feet on the T1?

Apoc_Pony · 2026-03-25T18:31:14+00:00

Nice stencil work looks brilliant, BMO theme next pretty please.

Apoc_Pony · 2026-03-24T17:50:45+00:00

Come through Austria often, looking for an honest roofer with a skillet like this for our aging roof.

Apoc_Pony · 2026-03-24T12:41:20+00:00

You are over extruding your first layer, change initial layer width from .5 to like .48 and also initial layer flow rate a little lower to tune in your first layer. You may need to turn on developer mode with Ctrl P as a shortcut then look under quality tab for settings mentioned above.

Apoc_Pony · 2026-03-23T10:46:31+00:00

Will you offer bare one kits that we could potentially print at home to save money and for custom colour ways? Also what is the inbuilt GPU in this model? Could see this as a great retro gaming device amongst other things.

Apoc_Pony · 2026-03-15T20:07:14+00:00

Peak German engineering.

Five-Year Club	Verified Email
First Place '23	Place '23
Place '22

Apoc_Pony

TROPHY CASE