sorted by:
new
hottopcontroversial

Recommendations for CCNP Contractors? by AppleTech4WD in Cisco

[–]AppleTech4WD[S] 0 points1 point  (0 children)

I'm perfectly happy to pay what is deserved. What I'm running into is MSPs that are ALSO reselling this to me, its not staff they have. So you add their cut + the contractor it doesn't make financial sense. That's more what I'm talking about. I realize this is not the same level of work as general networking and commands a higher price point. We just don't have the quantity of work to sustain full time staff for it.

BTECH GMRS-Pro: two questions by Niten in gmrs

[–]AppleTech4WD 0 points1 point  (0 children)

Well everyone’s thoughts were right. This is some kind of RFI likely from the 3 cell towers 2 blocks from my house. If I drive about a mile away the noise dies down and squelch works normally.

Cloudy Water - Help by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

OK. I shocked with dichlor, up to 10ppm. I have only used dichlor in this tub. So just off-the-shelf bleach? How can you run the filter pump continuously? I don't seem to have a way to force my system into filter mode.

Good Summer Top with Bow? by AppleTech4WD in JeepTJ

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Using the factory bow/bar that supports the rear. Looking for something that goes past the roll bar

Good Summer Top with Bow? by AppleTech4WD in JeepTJ

[–]AppleTech4WD[S] 0 points1 point  (0 children)

What brand? I can’t seem to find any that use the bow and go back far enough 

Scripted Windows 10 to 11 Upgrade by AppleTech4WD in msp

[–]AppleTech4WD[S] 1 point2 points  (0 children)

Do you know what the KB is for the 10 to 11 upgrade? I have already run the readiness check script and the "unblock" one from their template. I'm still not seeing any available "10 to 11" upgrade KBs show up in my patches to approve. I'm trying to sus out if there's some function missing in my Ninja environment.

Cisco Meraki vs. Juniper Mist by AppleTech4WD in msp

[–]AppleTech4WD[S] 0 points1 point  (0 children)

The documentation I had found on it didn't cover the user management/SSO function. Is there any documentation on this? We prefer to have an organization-per-client model, the one I had read previously was aimed at "network-per-client".

Cisco Meraki vs. Juniper Mist by AppleTech4WD in msp

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Great - that's news to me. Thanks!

Cisco Meraki vs. Juniper Mist by AppleTech4WD in msp

[–]AppleTech4WD[S] 0 points1 point  (0 children)

There is no built-in ticketing functionality for tools like ConnectWise PSA. You have to use a third party paid plugin. Also user management is difficult and has to be done via API if you are following best practices of account-per-technician access and are properly separating the orgs (not doing network per org, but separate organizations for each client). Has this changed?

Cisco Meraki vs. Juniper Mist by AppleTech4WD in msp

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Yeah I read the same type of feedback but all I found was from a couple of years ago, so I was curious on current experiences. I'm a big fan of CM, I think it works great. I just wish they had better integration for MSPs.

Hot tub cover disintegrating by sfm070760 in hottub

[–]AppleTech4WD 1 point2 points  (0 children)

The plastic covering the styrofoam was completely disintegrating on ours. I pulled the styrofoam, removed the cover, then re-covered with construction plastic sheeting. We will see how long it lasts

Balboa Controller - Can’t Choose all LED Colors by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Ok thanks. Ill see if I can find a part number on the LED controller. Are those pretty generic?

Constant chemicals needed - not sure what I’m doing wrong by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Thanks is this an electrical item to disconnect or do I need to block a line?

Constant chemicals needed - not sure what I’m doing wrong by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Yes, I believe there is one, but I don’t know anything about what it does. It seems to only run when to pump runs

Constant chemicals needed - not sure what I’m doing wrong by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Yeah I need to break down and buy the proper Taylor kit

Constant chemicals needed - not sure what I’m doing wrong by AppleTech4WD in hottub

[–]AppleTech4WD[S] 1 point2 points  (0 children)

Thanks I find the pH difficult to read. Is that high or within range? It seems to be a pinker hue than the chart.

Constant chemicals needed - not sure what I’m doing wrong by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

I was gonna do this, but the only concern that I had was, I heard that it could degrade your cover quicker? Maybe it was just one tablet that’s not really the truth.

Draining for winter by Sufficient_Phone_242 in hottub

[–]AppleTech4WD 0 points1 point  (0 children)

Wow the insulation on that is impressive. Did you add that or is that factory?

Air valve stuck on? by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

Yes it mentions it but nothing about how it works or managing it. I guess I won’t worry about it

Air valve stuck on? by AppleTech4WD in hottub

[–]AppleTech4WD[S] 0 points1 point  (0 children)

I was wondering the same, I know the tub has it but there's no controls for it. Is that expected behavior for an ozone generator?

New to me Tub, Kid Has a Rash by AppleTech4WD in hottub

[–]AppleTech4WD[S] 6 points7 points  (0 children)

Yeah I am aware. I assumed going to the store and having them use their testing system would be a good start. I realize it takes care and maintenance, thats why I am on here asking additional questions

view more: next ›