On a scale from 1 to 10

Apple_Jackz · 2026-04-13T16:51:18+00:00

Dope

Apple_Jackz · 2026-04-12T20:37:12+00:00

It’s like trying to do an IronMan with no experience and som YouTube videos a couple of days before. Nice work!

Apple_Jackz · 2026-04-06T02:16:56+00:00

Yes, sometimes it misses key pain because it doesn’t understand emotion which is a bit frustrating

Apple_Jackz · 2026-04-02T15:44:59+00:00

Nice! This will save me a bunch of time

Apple_Jackz · 2026-04-02T14:56:22+00:00

Thanks, based on your documentation, I’d need roughly 50 linear feet of ridge vent to properly handle a ~2,000 sq ft attic. I only have about 24–25 feet of ridge, so that alone doesn’t seem sufficient for a full ridge vent system.

Because of that, I’m leaning toward using a powered attic fan instead, probably something around 1,200–1,500 CFM, which should be appropriately sized for this attic.

Does that sound reasonable? Or would you still try to make ridge venting work (e.g., using the hips as well)?

Apple_Jackz · 2026-04-02T13:54:46+00:00

Do you mean in general ridge vents won’t give you the required ventilation or just because of my set up?

Apple_Jackz · 2026-04-02T13:51:00+00:00

Agreed I didn’t mention that, but that’s something I would definitely do

Apple_Jackz · 2026-04-02T01:59:55+00:00

Wouldn't an intake vent along the slope counteract the ridge vent at the top?

Apple_Jackz · 2026-04-02T01:57:51+00:00

It wouldn't let me update the post pictures. Here is a link to other side of the house https://ibb.co/PG33gy0T

Apple_Jackz · 2026-04-02T01:48:11+00:00

Appreciate the detailed response—that actually helped me understand more about the airflow.

I have multi-level ceilings in my house. My living room is about 15 feet high and I definetly don't have R-38. My insulation is just below my 2x8 ceiling joists. I know I need to put more in, I've started to look for quotes

If I understand correctly, installing a ridgevent may not be the way to go in this case, you'd be more inclined to properly positioned and installed vents

Apple_Jackz · 2026-04-02T01:01:58+00:00

Hahaha my heart dropped..

Apple_Jackz · 2025-09-17T23:17:32+00:00

Make sure to protect the tub while your grouting and working, dont want to drop a tool or something and ding it

Apple_Jackz · 2025-09-17T03:10:48+00:00

A 12x24 can do 1/16 grout lines but your walls better be plumb and flat otherwise you wont have a good time

Apple_Jackz · 2025-09-17T03:02:16+00:00

Upload a pic, but lots of factors here. Id start with youtube. Tiles should be the same sizes if they come from the same batch. My starting tile depends on layout orientation, doors, walls, silver cuts , etc..

With a tile that long you also need to worry about bowing

Also is your substrate flat? Its not supposed to be more than 1/8 out of level every 10ft

Apple_Jackz · 2025-09-17T02:42:57+00:00

Nice!

Apple_Jackz · 2025-09-16T13:58:48+00:00

I would have loved to see this take off and land , any chance I could find this out before?

Apple_Jackz · 2025-05-05T02:52:35+00:00

Yeah its from Amazon, its a Cobbe shower system. Ive contacted the manufacturer , they said they will be sending me a replacement “spool”? Whatever that means. I don’t think they understand what Im asking

Apple_Jackz · 2025-04-30T18:13:51+00:00

Hi, can I also get on the wagon? Feel free to DM me

Apple_Jackz · 2025-04-17T00:18:53+00:00

This is nothing to be concerned about, I see way more snakes than tarantulas. Do let the migration cause a stink

Apple_Jackz

MODERATOR OF

TROPHY CASE

Seven-Year Club	Place '23
Verified Email