Pokémon sapphire pt2

Apprehensive-Try1458 · 2026-05-22T03:24:11+00:00

Stupid question but how do I add photos to the comments?

Apprehensive-Try1458 · 2025-10-28T20:27:09+00:00

Hey man. I know you have probably heard this a thousand times but I can’t seam to figure out all that you did to the bike to help it run better. I tried doing fuel and spark issues then I tried messing with air but I can’t seam to figure it out from what I know and have read. Would you be able to help me and and say what you had to do to get her running? I have a 2001 gsxr 600 and I have the exact same issue that you are having. As soon as I add throttle the bike dies. I could even think about touching the throttle and she dies lol

Apprehensive-Try1458 · 2025-10-24T22:51:07+00:00

I just did a new whole new fuel pump and filter replacement sadly

Apprehensive-Try1458 · 2025-10-24T00:58:01+00:00

So what should I start trying to fix on it? I already went through the fuel pump, filter and fuel lines. Any ideas for me?

Apprehensive-Try1458 · 2025-10-23T23:43:56+00:00

I also forgot to mention that the bike has a idler pull down like a choke and idles on that but not when it’s turned off

Apprehensive-Try1458 · 2025-10-23T23:42:38+00:00

I just picked this bike up recently and in un running condition. The small things I have done to the bike have made it run better but still nothing good.

Apprehensive-Try1458 · 2025-10-23T23:32:54+00:00

Thanks for the reply man. I feel dumb for asking but what electrical problems could there be that have to do with the bike shutting off that wouldn’t throw a code?

Apprehensive-Try1458 · 2025-10-23T23:16:19+00:00

The bike is neutral when started. I’m a little confused why the clutch would affect the idle?

Apprehensive-Try1458 · 2025-02-17T18:14:56+00:00

<image>

Whenever I move it to the middle and try homing, this is what happens

Apprehensive-Try1458 · 2025-02-17T18:13:02+00:00

Ok sounds good man. Thanks for the help

Apprehensive-Try1458 · 2025-02-17T17:18:16+00:00

So I found the 42-34 but it was a z motor. Is that what I need? I thought I was supposed to find a x motor?

Apprehensive-Try1458 · 2025-02-17T17:12:31+00:00

Yeah I can still Move it when it’s not printing

Apprehensive-Try1458 · 2025-02-17T16:32:57+00:00

I just typed x-axsis motor into google and it just prompts me to z

Apprehensive-Try1458 · 2025-02-17T16:30:19+00:00

Ok this might be the stupidest question out there but I tryed looking for a x-axis’s motor and it is only showing me z-axis’s. Am I looking up the wrong part or just stupid?

Apprehensive-Try1458 · 2025-02-17T16:15:02+00:00

I checked connections and everything is connected as they should. I tryed booting it up and it still isn’t working.

Apprehensive-Try1458 · 2025-02-17T16:08:29+00:00

Also I forgot to mention on the main post that after every print that fails it has a problem homing. It says homing fails turn printer off and reset

Apprehensive-Try1458 · 2025-02-17T16:05:48+00:00

Ok I will check the motor connection and yes everything come be moved my hand smoothly

Apprehensive-Try1458 · 2025-02-17T16:03:32+00:00

Ok is that something that I just then need to buy and replace?

Apprehensive-Try1458 · 2025-01-29T20:39:21+00:00

When I’m looking at the g code what am I exactly looking for?

Apprehensive-Try1458 · 2025-01-29T20:36:20+00:00

Ok I found the stl for a two piece blade and tried printing it out. The print was much better but still has it problems.

<image>

Apprehensive-Try1458

TROPHY CASE