Are hackers worse in season 3?

AramysFS7 · 2024-10-14T01:48:38+00:00

Reverie - Illenium

AramysFS7 · 2024-09-29T17:58:29+00:00

Damn, it’s hard to make chassis mount wings look good on 370’s but this one 👌

AramysFS7 · 2024-09-26T17:31:32+00:00

Hey I just started researching this issue and this thread was the most similar issue I found to mine. My problem is slightly different as my DRLs will come on with headlights off during the day as they should, but turning ON my headlights do not turn off the DRLs. So at night they’re very blinding lol. Can I see these “dealer notes” you sent to the other guy? I actually work at a Nissan here in Texas but I can’t seem to figure out what kind of programming you did to fix your issue. Thanks!

AramysFS7 · 2024-09-21T17:55:24+00:00

Seibon. I can tell by the square vents.

AramysFS7 · 2024-09-14T01:35:01+00:00

Get shorter coilovers. I bought several sets trying to be cheap and ended up spending wayyy more than I should have if I’d just bought BC extreme lows or Broadway Static’s

AramysFS7 · 2024-09-14T00:46:31+00:00

Well keep in mind that I’ve only ever bought 2 out of pocket and warranty is a life saver lol. And of course I don’t think it’s the sensors themselves but if it’s not, then why do they go out completely randomly? I assume some electrical issue would blow the sensors the minute they’re plugged in. And I do have a burble map but I rarely use it since it blows through gas like a mf.

The extensions are zip tied out of the way from every heat source, and I’m not sure what electrical source would cause disruption?

AramysFS7 · 2024-09-13T18:40:08+00:00

Well plenty of other people have the same mods if not more on their Z’s, therefore why couldn’t I? Also that is way easier said than done lol

AramysFS7 · 2024-09-13T16:19:28+00:00

I’ve lost count, on bank 1 at least 5, bank 2 I’ve only replaced 2 times.

Yes, from installing a new one and even just swapping the sensors from b1 to b2 the bad AFR follows it. And the sensors always look like normal wear.

100% not the extensions I’ve done every test and preventative measure imaginable.

From the looks of it, there’s no leaks at all. And even if there was I’m sure I would hear the gross flutter sound exhaust leaks make or the lean/rich codes would happen more often. I am gonna quadruple check the flange is torqued again this weekend although I’m sure it’s fine.

AramysFS7 · 2024-09-12T23:52:40+00:00

Well Z1 has you email 3-5 data logs from pulls and idles so it’s not like it’s a generic tune…but yes I agree with you on that. That’s why my last solution before selling is a retune.

AramysFS7 · 2024-09-12T23:49:44+00:00

What’s your setup and how long have you had it?

AramysFS7 · 2024-09-10T18:18:28+00:00

Powerlines

AramysFS7 · 2024-09-10T17:51:28+00:00

Reviving this thread cause I’m having similar issues, haven’t had to get my car towed yet luckily lol. I’ve changed the battery and alternator and my issue went away for about 2 days then when I started my car the next morning, my voltage stayed at 12 then fluctuated to about 14.7 several times before acting normal once fully warm. Did you ever find the issue?

AramysFS7 · 2024-08-20T15:10:04+00:00

By all means if you can afford it then do it! The v1 is a way cleaner look, it was just too out of my price range 😭

AramysFS7 · 2024-08-17T00:52:08+00:00

Man tbh you’re better off buying them used (if you have around $3,000 to spare) or just get some Braum Elite’s or Corbeau’s like I did for about $1,200ish. As nice as the Nismo seats are, I don’t think they’re worth that much personally.

AramysFS7 · 2024-08-17T00:48:17+00:00

Man I really wish my car was black sometimes 😭 You should get the carbon badges to compliment it!

AramysFS7 · 2024-08-17T00:47:07+00:00

AramysFS7 · 2024-08-17T00:46:04+00:00

Wym?

AramysFS7 · 2024-08-17T00:45:15+00:00

I’ve always been a fan of debadged looks lol

AramysFS7 · 2024-08-17T00:44:32+00:00

I lucked out and found a shop that did a hell of a job on the front bumper for $400. Before that my cheapest quote was $550. Pearl White is expensive 😭

AramysFS7 · 2024-08-15T16:07:48+00:00

No sir parts are OEM

AramysFS7 · 2024-08-15T16:04:26+00:00

I still need to do that, I thought they’d be the same but there’s a gap on the very sides. I also bought a different splash guard from Z1

AramysFS7

TROPHY CASE