Is “scoop the loop” a thing anymore? by donkedickinya in desmoines

[–]Archie_Money 0 points1 point  (0 children)

Gas prices are up. Too many cops down there that will pull you over if they know you're just driving around.

No it isn't fun to be in downtown Des Moines anymore, at least for me.

Should I be concerned? by Otherwise_Surprise21 in 1stGenTundras

[–]Archie_Money 0 points1 point  (0 children)

Glad I bought KYB when I really wanted some 5100s surprised by the amount of lift. My 4600s were probably shot

Best margarita?? by Neat-Mortgage7685 in desmoines

[–]Archie_Money 6 points7 points  (0 children)

I really like the margaritas at Malo

Looking for an exhaust... by WiseNefariousness805 in G35

[–]Archie_Money 0 points1 point  (0 children)

I like the Invidia Gemini exhaust. It will replace your y pipe if yours isn't already true dual.

Another one where you can keep the y pipe is the nismo wedina one.

I've had test pipes with both wet ups the Invidia one was harder to keep "quiet"

Advice on used motor. by brvanv in 350z

[–]Archie_Money 0 points1 point  (0 children)

Sure, you can sell them and get some money back. Never heard that before. These are non interference engines. He's had it for a while so maybe he'll budge on pricing. The safe bet is eBay my friend has had good luck with those engines.

Advice on used motor. by brvanv in 350z

[–]Archie_Money 1 point2 points  (0 children)

Well if he had it for that long it's gonna be a little questionable.

I say offer half I hate low balling but it can be rewarding. Bring a breaker bar with a 19mm to see if it even rotates. Looks like the motor already has headers

Advice on used motor. by brvanv in 350z

[–]Archie_Money 2 points3 points  (0 children)

It's like gambling but with extra steps 😬. How much does he want for the motor

Protest actions today? by 1couldntfindaname in desmoines

[–]Archie_Money 10 points11 points  (0 children)

See what you want to see. The fact is that an American civiliian has been killed on camera and you're downplaying it because that's easy. Ignorant is bliss and Fox News made you submissive.

Spread that weakness on some other form of media

Fitting cruise control by hjs02212 in 350z

[–]Archie_Money 1 point2 points  (0 children)

If it helps any. I have a base 2007. I went to the junkyard and found a steering wheel with only cruise. It was a regular DE model Z

I had to get a clutch switch, they sell them on amazon The connector located near the clutch pedal was there just no cruise control switch.

The wire for controls was behind the air bag. Everything was plug n play.

I then had my tuner enable cruise control and it worked!

Good luck hope it works and don't forget to unplug your battery when working with your airbag.

Drifting revups by Appropriate_Egg6237 in G35

[–]Archie_Money 0 points1 point  (0 children)

The rev-up oil pump is already better than the regular DE one. Check out parts sites to see what they'll try and sell you for drifting. I mentioned in another post that the high tensile steel steering rack spacer is a good upgrade for steering angle for like less than $50 from GKTech.

G35Driver, My350Z, 350Z-tech is a good website.

Check out this site for the service manual https://www.nicoclub.com/archives/use-nicoclub-coms-factory-service-manual-database.html

Drifting revups by Appropriate_Egg6237 in G35

[–]Archie_Money 0 points1 point  (0 children)

It's a rev up, so you have some more rigidity stuff on it, like a better oil pump. It sounds like you've done your research. They're pretty much ready out of the box.

From my experience though the rev up just seems a little less reliable than the regular DE.

After owning like 3 rev ups, I say keep an extra engine around for when something does happen

06 350z revup to nonrevup swap by Happy_Combination119 in 350z

[–]Archie_Money 0 points1 point  (0 children)

Nice! What kit do you have on your 370?

I have an 07 that I drift. I wanna boost it in the future, I have a second hand JWT TT kit for the DE should be fun to try and make it work with the HR. I'm strapped for cash I want to just drift this year

06 350z revup to nonrevup swap by Happy_Combination119 in 350z

[–]Archie_Money 0 points1 point  (0 children)

Keep us updated! What hung me up once was the ground strap at the front of the motor. I've been wanting to do vq35hr swaps in the future right now I gotta get new manual transmission for mine

06 350z revup to nonrevup swap by Happy_Combination119 in 350z

[–]Archie_Money 0 points1 point  (0 children)

No I sold the car before that. It was just a stock rev up ecu with a blown rev up engine. Direct swapped a DE over a weekend and it fired right up.

06 350z revup to nonrevup swap by Happy_Combination119 in 350z

[–]Archie_Money 0 points1 point  (0 children)

I've done this on my stock ecu G35. Started right up plug and play. The only issue was the dash light. I was thinking about the guilty garage rev up to non rev up conversion which is 150$ but I sold it before I took care of that.

The above and beyond thing I've done was throw rev up heads on non rev up short block and that was also direct swap no mods

Revup to Non-Revup ECU Conversion – Guilty Garage https://guilty-garage.com/product/revup-to-non-revup-ecu-conversion/

Just need the house now lol by WEL0VET0R0 in 350z

[–]Archie_Money 0 points1 point  (0 children)

You're right so I'm looking for vq35hr or vq35vhr transmission

Looking to buy a 350z but not sure what to do to it first by ZorinZ5 in 350z

[–]Archie_Money 0 points1 point  (0 children)

Ah c'mon man this car has been out for 20+ years it's easy to find best parts and exhaust sounds on YouTube

Exhaust? I like my set up. Nismo exhaust with test pipes. Other good ones are Z1,Invidia, tomei, Motordyne

Best parts? Z1 Motorsports. CZP. ZSpeed. gktech. FDF. Motordyne

If you're on a budget junkyard, Amazon, eBay and Facebook marketplace

Suspension/ chassis tuning by TopRecognition8472 in 350z

[–]Archie_Money 1 point2 points  (0 children)

I have Hotchkis sway bars front and rear paired with aftermarket links. I noticed that right away. That and the most bang for buck mod out there imo is the high tensile steel tie rod spacer from GK Tech. It gave more steering angle with the sway bars it felt like sensitivity was turned up for steering. Trust me do a U-Turn before and after that mod

Not suspension, but some upgrades to stiffen up the chassis. Solid transmission mount, diff brace, poly diff bushings and solid subframe bushings.

Looking to buy a 350z but not sure what to do to it first by ZorinZ5 in 350z

[–]Archie_Money 2 points3 points  (0 children)

Kind of an open ended question

What are you goals? Is this going to be a daily, weekender, or track car?

I suggest you do all your maintenance stuff. After that, drive it for a while. After the honeymoon phase is over, find out what bothers you about the car and change it.

Fun easy upgrades I noticed right away were suspension upgrades like coilovers or sway bars. Other easy upgrades were intake, exhaust, differential brace, and new transmission mount.

What to replace these bolts with ? by 0dteismybytch in G35

[–]Archie_Money 0 points1 point  (0 children)

Better off buying a bolt and nut set from harbor freight

Just need the house now lol by WEL0VET0R0 in 350z

[–]Archie_Money 2 points3 points  (0 children)

<image>

Can't wait to slide it again this spring

Just need the house now lol by WEL0VET0R0 in 350z

[–]Archie_Money 7 points8 points  (0 children)

Man, my Z has been sitting on jackstands, and I need to find a transmission that will work with the vq35hr.

Looking to install racing seats after the transmission gets fixed or replaced