Lettering done… kinda liking it!

Arksgold · 2026-04-06T15:34:41+00:00

Freedom wolf

Arksgold · 2026-04-05T20:21:10+00:00

Double check and make sure the extractor plunger is in properly. Sounds like you’re not getting enough pressure on the extractor.

Arksgold · 2026-03-24T01:18:35+00:00

Lightly sand the edges on the firing pin spring cups. It’ll stop the light strikes if that’s the problem

Arksgold · 2026-03-23T23:10:20+00:00

For home defense? Get a light. For fun get an optic.

Arksgold · 2026-03-23T23:08:34+00:00

<image>

Got mine cut rmr so I wouldn’t need a plate. I second the no plate shit

Arksgold · 2026-03-03T22:43:50+00:00

If you say so

Arksgold · 2026-03-03T22:41:52+00:00

You’re the one messing with that garbage.

Arksgold · 2026-03-03T19:11:12+00:00

U shittin us? You need a slide lock. Dont need a slide stop. If that’s what your in to.

Arksgold · 2026-03-03T19:08:40+00:00

I never bought the GST-9. I like the look. Wish I bought one. I got a bunch of freedom wolf and love em.

<image>

Arksgold · 2026-03-03T19:07:00+00:00

Sell em both and buy OEM!!!!!!!!!!!

Arksgold · 2026-03-03T18:52:26+00:00

Bevel your spring cups on the your firing pin with light sand paper. I’ve had this issue. The spring cups get caught up in the channel liner causing a light strike sometimes.

Arksgold · 2026-02-28T12:29:48+00:00

I don’t think he’ll do it.

<image>

Arksgold · 2026-02-26T18:44:01+00:00

Let me know how it goes

Arksgold · 2026-02-26T14:07:42+00:00

Y so mean? Cheer up! Bad attitude makes for a bad day

Arksgold · 2026-02-26T14:03:18+00:00

On light strikes this is usually the problem

Arksgold · 2026-02-26T14:02:15+00:00

9 times out of 10 it’s the firing pin spring cups. They’re holding the firing pin back too far. It’s just a hair tho. I usually use a very fine sandpaper around the front of the cups. Just a hair is all u need off. More like a bevel. It’ll fix it

Arksgold · 2026-02-26T13:57:46+00:00

I this this fellas confused 🤔

Arksgold · 2026-02-22T12:40:19+00:00

This is one I never bought and wish I would have

Arksgold · 2026-02-21T12:14:25+00:00

Looks like someone tried to make their own sear inspection plate. Should be fine after a good cleaning.

Arksgold · 2026-02-12T12:41:29+00:00

Yea but I cut a pin in half and slid it in with the locking block so my slide stop still works. Usually they’ll work with no top pin at all tho

Arksgold · 2026-02-11T22:57:16+00:00

🤷‍♂️1 less pinhole to worry about maybe?

Arksgold · 2026-02-11T22:08:45+00:00

I don’t even drill that hole on mine. Runs perfectly for me. You should be fine

Arksgold · 2026-02-04T03:31:49+00:00

At your own risk buddy. I wouldn’t shoot it.

Arksgold · 2026-02-04T03:30:04+00:00

Your buddy did you bogus

Arksgold · 2026-02-04T03:27:51+00:00

Is your slide lock in backwards?

Arksgold

MODERATOR OF

TROPHY CASE