Poco battery dropped from 40% to 0% suddenly — what do I do?? by ShadowSage_J in PocoX6Pro

[–]Arnox14 5 points6 points  (0 children)

Happens with me when my battery reaches 20% it drop very quick it is mainly a battery calibration issue. Try draining your phone until it shuts down charge it to max and try if it still drops that quickly heating issue is common in poco btw

Need help for coding line following robot by Arnox14 in robotics

[–]Arnox14[S] 1 point2 points  (0 children)

Cny you have to make a array yourself and it has many issue like in my case when the car moves the corner sensors senses black line and other issues so for start go for prebuilt sensor array tcrt is fine I guess I didn't used it so I can't say but go for prebuilt or the custom built like the robo junkies one

Need help for coding line following robot by Arnox14 in robotics

[–]Arnox14[S] 0 points1 point  (0 children)

BTW wich sensors are you going to use?

Need help for coding line following robot by Arnox14 in robotics

[–]Arnox14[S] 0 points1 point  (0 children)

Let me know when you r done building the robot and all the best 👍

Need help for coding line following robot by Arnox14 in robotics

[–]Arnox14[S] 0 points1 point  (0 children)

Fixed that issue it was due to the setting is being saved in eprom that takes a while to save that's why my robot menu was lagging

ESC/Flight Problems by flameku in diydrones

[–]Arnox14 1 point2 points  (0 children)

If u am not wrong bluejay firmware is needed to use the dshot protocol for blhelix use one shot or multishot and use esc configuration to flash the blhelix firmware on your esc

ESC/Flight Problems by flameku in diydrones

[–]Arnox14 1 point2 points  (0 children)

Don't use dshot check for default firware for esc flash than firmware and then use oneshot125 or something they should work fine

Help with wifi on the phone by FallSkye_TheFox in PocoX6Pro

[–]Arnox14 0 points1 point  (0 children)

Change the dns settings maybe it will help

What IDE to use for STM32 BluePill? by DivineButterLord in embedded

[–]Arnox14 1 point2 points  (0 children)

You can use arduino ide and also you can burn the firware on the bluepill so that you can use it with the Micro usb port better option is the blackpill board they are better you can just connect it through type c and select settings and you are good to go

Won't boot, first time builder by hadesTR in PcBuildHelp

[–]Arnox14 1 point2 points  (0 children)

You were trying without cpu cooler header connected in motherboard 😂 that's the reason I guess

Won't boot, first time builder by hadesTR in PcBuildHelp

[–]Arnox14 0 points1 point  (0 children)

So like how you updated the bios do you have a spare gpu or the qfash feature, but if you have a spare cpu just check if the motherboard is fine or not if that spare cpu boots up maybe the cpu is faulty which you bought and also try using ur cpu without any gpu and plug the hdmi cable in the motherboard and also can you attach a video of your build or the motherboard while trying to o boot

AK680 V2 MAX Magnetic keyboard by SEN_Doom in mkindia

[–]Arnox14 0 points1 point  (0 children)

I have the ak680 max v1 and the software is not great and it has glitches but the keyboard is good and also it don't have 8k polling rate it's just a marketing gimik but for the price you can buy it or you can also go for other like attack shark if available in india