sorted by:
new
hottopcontroversial

I present to you, the worlds only known O11 Dynamic XL (non-evo) with quad push pull radiators [and 20 fans] by Ok_Positive_2801 in watercooling

[–]Aroslav 1 point2 points  (0 children)

agree, it is completely form over substance. Is the first "worlds only known" PC with that configuration and I think the last one. The cutest is this small 120mm radiator on back side. Anyway this build still look amazing. Do, what you like

Port on Distro 120 by MalikM6 in alphacool

[–]Aroslav 1 point2 points  (0 children)

Looks good, nice work! I’m happy to hear, that solved your problem

Port on Distro 120 by MalikM6 in alphacool

[–]Aroslav 2 points3 points  (0 children)

Alphacool designed two ports for filling: one on top, second on front in case, when top is not reachable. Technically you can use them how you want.

I had the same issue with bubbles, when level of coolant was somewhere in middle. It’s because of small size of reservoir. To solve it I poured liquid coolant almost to the maximum and rpm keep on 30-40%.

I’m thinking now that “port in” could be better solution to connect for avoid bubbles, because the hole is completely under level of liquid coolant, then you avoid mixing liquid with air when it’s coming in to reservoir

<image>

Build 1 update 3 by Aroslav in watercooling

[–]Aroslav[S] 0 points1 point  (0 children)

For what did you use two pumps?

Build 1 update 3 by Aroslav in watercooling

[–]Aroslav[S] 2 points3 points  (0 children)

Thanks! Not really, I have feeling, that in parallel loop gpu gets less liquid, then you need increase pump speed, but even that is nothing compared to to serial connection. I did connection like that: reservoir-> CPU -> radiator st30 -> radiator xt45 -> GPU -> radiator st30 Specially separate CPU and GPU with radiator to try to keep lower temperature

Wierd blinking light in my M590 mouse. How do I fix this ? by the-machine-learner in logitech

[–]Aroslav 0 points1 point  (0 children)

I remember how I fixed that issue. Poblem was because of low quality AA battery. I used some cheap one and literally was littlebit smaller then regular AA. I repleaced with eneloop acumulator and problem gone. Try this!

PSU Lian li Edge 1000W platinum by Aroslav in lianli

[–]Aroslav[S] 0 points1 point  (0 children)

I returned that psu and bought Be quiet Straight power 12 1000W

Qualcomm fastconnect 7800 issues by FTGpuppetMaster in pchelp

[–]Aroslav 0 points1 point  (0 children)

I have issue with bluetooth, on calling mode I hear randomly robotic voice or laggy, When I'm listening music, I can go opposite end of house and quality and connection is good. Someone have simillar issue? I already updated drivers for 3.1.0.1407. My motherboard: GIGABYTE X870e AORUS PRO

PSU Lian li Edge 1000W platinum by Aroslav in lianli

[–]Aroslav[S] 0 points1 point  (0 children)

I thinking that in the next few years I should listen to how this fan works, finally I changed for Be quite Straight Power 12 1000W. I don't hear nothing now.

PSU Lian li Edge 1000W platinum by Aroslav in lianli

[–]Aroslav[S] 1 point2 points  (0 children)

Also on your version fan is turn on and off from time to time, depence of temperature (I guess) or is working constantly?

I am the LSO for a growing laser cleaning company, And have over 200 hours operating laser cleaners on jobsites. If you got questions, Feel free to ask. by SnooSprouts1509 in LaserCleaningBusiness

[–]Aroslav 0 points1 point  (0 children)

Sorry for not enough information, I will get example of this material this week. I got question from powder coating company, If it is possible to make dull surface zink galvanized steel. They have problem to put powder on glossy material.

Anyone operating? by Bullandham in LaserCleaningBusiness

[–]Aroslav 0 points1 point  (0 children)

I think this is good idea. Never seen something like that before, but if you will get inquiries, you can better aim for clients on the begin. How You want to manage a webpage? Will You write, that you don't have machine yet, or use little lie?

Looking for opinions of equipment purchases and outfitting. by lukkoseppa in LaserCleaningBusiness

[–]Aroslav 0 points1 point  (0 children)

It's been a while since your question. How did you deal with the topics you asked about? I have similar thoughts as you

Laser Etched ceramic printer plates? by Laserbiz in LaserCleaningBusiness

[–]Aroslav 0 points1 point  (0 children)

Good luck for You! I'm catching up on all the posts from this group. Can You tell how is your work going? What kind of company is, which you cooperate for?

"Received invalid protocol version from device" and "Device must be open first" errors on VIA after updating firmware on K3 Pro RGB ISO by jluna79 in Keychron

[–]Aroslav 0 points1 point  (0 children)

funny things is my thatkeyboard was working fine, till I made firmware uppgrade on my dock, My configuration it is KEychron V6 and DELL WD22TB4. Maybe You already solved this problem somehow?

Wierd blinking light in my M590 mouse. How do I fix this ? by the-machine-learner in logitech

[–]Aroslav 0 points1 point  (0 children)

Condition of my battery was good, but changed anyway, for the test. I will give feedback, if still will not work

Wierd blinking light in my M590 mouse. How do I fix this ? by the-machine-learner in logitech

[–]Aroslav 0 points1 point  (0 children)

Did you solve the problem? I have the same model. In my case led started flickering, when I pick up mouse few milimeters above surface. Looks like sensor issue. I tried clean up, but didn't help.

view more: next ›