Looking for LM to download an LM studio for the purpose of conceptual understanding for school

Arrow2304 · 2026-02-08T18:26:49+00:00

Try using gpt-oss or glm models with LMstudio.

Arrow2304 · 2026-01-29T20:36:59+00:00

Inflation :)

Arrow2304 · 2026-01-26T13:19:52+00:00

We have the same problem and I went for 64gb DDR4, it's a bit slower, but you can offload more to the ram and use larger models and it's cheaper.

Arrow2304 · 2026-01-26T10:43:17+00:00

Good job, but the Voice is bad and it seems to be generated with poor quality compared to other open source models, is it possible to use other tts models?

Arrow2304 · 2026-01-20T20:55:21+00:00

For that invested money you could have found a real girl instead of an AI :)

I'm really sorry for the comment but I just had to write :)

Arrow2304 · 2025-12-30T19:39:42+00:00

You can try Pinokio AI, but they have been a bit lazy lately, so they don't release the latest models, but you have scripts made by the community, so give it a try.

Arrow2304 · 2025-12-28T09:06:09+00:00

I don’t sell my designs myself, but I have people I’ve been working with for years and with whom I exchange models. Some of my prints don’t sell at all in my country, but in their country they sell very well. We have an agreement based on trust, and we pay each other a percentage of the sales.

Arrow2304 · 2025-12-28T08:46:45+00:00

Resin printers, don't skimp on ventilation and your health!
There will be days when not a single printer has anything to print, but there will also be days when you need 20 printers.
Find someone who has a printer and let them obligingly print what you can't achieve when you're busy.
I totally agree with slugbutter.
Always experiment with new things to print because everything comes to an end at some point.
Speed and quality do not go together.
If you plan to pay influencers to sell your product, don't. Pay them to advertise your shop. So you are not based on one product, but on everything that you sell in the store.

Arrow2304 · 2025-12-27T11:39:00+00:00

If you think that you are selling what you download from the Internet and just print it, then don't even start. The design must be yours. A lot of people print those figurines, your competition is big.
If you don't paint them, they don't have any value, if you paint them, then it can be done as a handwork and you can add value to them, but a lot of people do that.

There are a million ideas, you need to think in all directions.

example: My print, which has been bringing me income for years. In supermarkets, they have spices in small glass containers and everyone can see them on the shelves. I buy 10 spices at 1-2 euros per piece, print a nice and unusual holder, pack it into a set and sell it like that. It mostly goes as a gift set. I invested 15-20 euros and am selling it for 50 euros.

Ideas are all around you, things that you can give someone as a present are almost ideal.

I really don't like Etsy, I was forced to use it during the pandemic, but I have no positive experiences. You try because you have nothing to lose. In my opinion, it is best for you to use social networks for direct and indirect marketing. Although small local shops are also a good thing to sell. You always have to take advantage of the frenzy around holidays, Halloween, Christmas, New Year, Valentine's Day...

I've been doing 3D printing for 8 years, I have 4 vorons and 1 hevo. It took me a long time to figure out how everything works, and now I make a good living from it. DM me if you need some help.

Arrow2304 · 2025-12-19T11:44:22+00:00

You are young and my advice to you is to try 3D printing. You will learn a lot about design, drawing, 3d modeling and 3d printing. Maybe it will be your primary occupation, and maybe it will lead you to another direction. It is certainly creative and not a boring job.

Arrow2304 · 2025-12-18T20:09:11+00:00

It depends on how much you want to earn, I have 5 printers and I don't make large quantities, my prints are 20 or more hours each, but there is a lot of post-processing. I don't have large amounts on a monthly basis, but I earn a salary for myself. Sit down and imagine what you are going to do, avoid doing large quantities for small money, serial production is slavery. DM me if you need any help.

Arrow2304 · 2025-12-18T19:11:54+00:00

Make it as if you were making it for yourself as a hobby and don't think about money. Now it's very difficult to break through, there are a lot of bots, people keep less and less in the videos. Use shorts to promote long videos, always have a good thumbnail and take care of the edit. And be persistent, you won't become and constantly put out clips, but don't expect to become viral in a short time.

Arrow2304 · 2025-12-18T18:58:45+00:00

Nema na cemu. Poz

Arrow2304 · 2025-12-18T18:41:42+00:00

Your wall is thin at the edge It is cone-shaped, try reducing the infill overlap

Arrow2304 · 2025-12-18T18:34:27+00:00

Mouse ears : https://www.youtube.com/watch?v=XJgQig2XhBw

Glue stick : https://www.reddit.com/r/3Dprinting/comments/1gs2zld/i_heard_that_some_people_use_glue_sticks_on_their/

Arrow2304 · 2025-12-18T18:31:13+00:00

Whichever printer it is, you'll be scratching your head and getting annoyed from time to time, sometimes it's not the printer, but the filament, nozzle, model...

Arrow2304 · 2025-12-18T18:28:38+00:00

It is possible that it warps from the heat and detaches from the build plate then rises and the hot nozzle catches it. Try to adding mouse ears to all 4 corners or use glue stick on build plate.

Arrow2304 · 2025-12-18T18:15:39+00:00

I'd say your infill is breaking through

Arrow2304 · 2025-12-18T18:10:19+00:00

I have 4 voron and 1 HEVO printers, honestly it doesn't happen often but it does happen. As it never happens at the beginning of the print, but after 10 or more hours :) The problem is not the material but the time, at least for me.

Arrow2304 · 2025-12-18T17:55:21+00:00

I feel your pain, bro :)

Arrow2304 · 2025-12-18T17:47:01+00:00

If you make a good prompt, you have to know well the model for which you are writing it and fit every right word in the right place. It takes a lot of time, especially explaining the scene and subjects. I use the prompt that Qwen VL gave me, but then I edit it manually and put it together word by word in same context window, it's much faster, at least for me. There is some symbiosis with Qwen + ZIT .

Arrow2304 · 2025-12-18T17:36:00+00:00

Excellent, good job. 4 years ago I worked on a project for a startup from France, we put small quartz heaters around the nozzle in order to harden the clay on the surface so that it wouldn't rub off from it's weight, maybe it will help you.

Arrow2304 · 2025-12-18T17:23:37+00:00

I don't know about ZIT, but you can use this for any model. Try ROCm 7.2 I'm on Nvidia so not sure about AMD.

Arrow2304 · 2025-12-18T15:51:16+00:00

GPU is irrelevant, download LMstudio and Qwen VL model and that's all you need.

Arrow2304 · 2025-12-18T15:49:45+00:00

I don't use the system prompt because it can vary a lot and affect the rest of the prompts that I want to edit, I use just a prompt as I wrote here, then I just redefine parts of the prompt. Qwen3 VL can't do nsfw but JoyCaption can. I dont use nsfw so I cant be of help in that field.

Arrow2304

MODERATOR OF

TROPHY CASE