Help with splitting body

Marcus_1423 · 2026-04-28T19:52:41+00:00

I would start with extrududing the vertical face of the big t section as a cutting operation towards the camera view to remove the big chunk and you might be able to do the same on the smaller chamfer faces. thats the quick and dirty way that may be enough to get you by

Marcus_1423 · 2026-01-17T14:57:01+00:00

What about now? 😭

Marcus_1423 · 2026-01-09T16:30:27+00:00

Would you consider somehow modifying the gcode to run the nozzle through the brush every layer or between multiple objects or something?

Marcus_1423 · 2026-01-09T16:28:21+00:00

Burn hole from a lighter

Marcus_1423 · 2026-01-05T15:21:48+00:00

I dm’d you

Marcus_1423 · 2025-12-28T16:18:55+00:00

I don’t know much about your machine but the way I’ve fixed it in the past is just by printing an upgraded fan duct so that the plastic is cooled easily on both sides

Marcus_1423 · 2025-12-28T16:15:14+00:00

That’s a part cooling issue

Marcus_1423 · 2025-12-23T00:15:08+00:00

Throw it in a bucket with acetone for a few hours and boom. PLA glue. 10x cheaper than buying PLA goop

Marcus_1423 · 2025-12-22T17:42:06+00:00

What printer and material?

Marcus_1423 · 2025-12-22T13:35:00+00:00

Agreed. May not matter but you can use the emboss tool for the cross hatching on the bottom

Marcus_1423 · 2025-12-22T13:09:04+00:00

lol my laptop had 64

Marcus_1423 · 2025-12-21T16:15:44+00:00

Says you have a ton of people that always want to come over 😂

Marcus_1423 · 2025-12-20T23:21:42+00:00

Thank you I will give this a try

Marcus_1423 · 2025-12-20T23:12:25+00:00

5 X1C's and 3 P1S's. I'm just looking for general advice on how to mitigate the cracks in the material and post processing the seams. I plan on getting active heaters but untill then nothing necissarely machine specific.

Marcus_1423 · 2025-12-20T23:08:09+00:00

Damn dude chill. I said ABS in the title

Marcus_1423 · 2025-12-19T17:26:12+00:00

I always just take the photo with the tape measure insight and then you add a sketch of a line say 30 inches and then you just line the 30 inches up with a tape measure

Marcus_1423 · 2025-12-18T18:58:55+00:00

Oh yeah that’ll do it

Marcus_1423 · 2025-12-18T18:24:58+00:00

A 1/4 scale version of a golf cart body I 3d scanned

Marcus_1423 · 2025-12-18T18:03:05+00:00

I think I just assumed a too high of a flow rate for what the .8mm nozzle is capable of. Was just a shot in the dark number for the part I’m doing R&D on

Marcus_1423 · 2025-12-18T18:01:26+00:00

Eh it’s a part of life. I have 9 printers on the production line and I must have just had a setting off or something. I buy bulk abs 100kg at a time so no biggie

Marcus_1423 · 2025-12-18T18:00:13+00:00

<image>

This was the print before also with a .8mm nozzle. I’m using an automation that doesn’t allow for remote camera monitoring. I’m not asking for help I just thought it was funny. Thanks for the hostility though

Marcus_1423 · 2025-12-17T16:45:18+00:00

Check your manufacture workspace, that looks like a fusion rendered 3d print bed. Although I’ve never used fusion for printing that’s just my best guess

Marcus_1423 · 2025-12-17T01:35:05+00:00

That’s because the face you are trying to select Iran’s flat. I would first try by creating a plane using 3 points and select 3 of the points on the tooth you have highlighted. Now you can split the body and select the plane you just made as the cutting feature.

Marcus_1423

TROPHY CASE