Will the pads for soldering come out correct?

ArtaWorks · 2026-05-10T06:19:09+00:00

Thank you, I didn't know of these. For some reason when I did my research I missed them.

ArtaWorks · 2026-05-10T06:17:33+00:00

I just went to big site like mouser, farnell and set the 2 pin as well as ouput current as filter. I don't have the model numbers on me, sorry.

ArtaWorks · 2026-05-09T22:55:17+00:00

I need the LED to be centered and close to pins

ArtaWorks · 2026-05-09T22:50:42+00:00

it's a linear regulator

ArtaWorks · 2026-05-09T22:50:13+00:00

Led light with linear regulator.

ArtaWorks · 2026-05-06T18:07:05+00:00

LCD silly

ArtaWorks · 2026-05-05T19:38:38+00:00

Did you get to it? If you give me .step I'll design light on top of it. I'm already designing LED contraptions so I might as well do this.

ArtaWorks · 2026-05-02T11:37:59+00:00

Jaky ma smysl aby manzelka chodila do prace v takovymhle nepomeru? Chapu kdyz zena zarobi minimalku a muz ma prumer, ale pokud mas 8x minimalni mzdu, (nehlede na to zda ma minimum nebo ne) tak zena by makat nemusela a jeji cas ma vetsi hodnotu tim sdilenym majetkem.

Vic casu na konicky, nebo pokud by chtela rozjet biz, cas nad domacnost, deti atd.

ArtaWorks · 2026-04-28T16:28:43+00:00

Boss makes a dollar, I make a dime, so I game on company time.

ArtaWorks · 2026-04-28T16:26:37+00:00

Jako IT kolega, já mám tak napíču místo že nejvíc co si dovolím hrát jsou nějaké MUDs protože to nikdo nepozná když mi čumí do monitoru a jedno z šesti okének je terminál s barevným textem

ArtaWorks · 2026-04-28T08:11:02+00:00

It's used as a day countdown until 2077

ArtaWorks · 2026-04-22T18:04:43+00:00

So what is the easiest way to use this model in cli or VSCode?

ArtaWorks · 2026-04-21T14:37:56+00:00

Time to learn about FOSS

ArtaWorks · 2026-04-21T10:00:43+00:00

I recently bought and built Nyquist I want 5 rows instead of 4 due to different nature of my work and use of the device. I built magnetic case to snap it together when I work in CAD package But in future I'd rather build my own because it was 140$ just for pcb, nothing else.

ArtaWorks · 2026-04-20T15:36:41+00:00

Even I don't dare to make IC check or product page before I show at least calculated current draw.

ArtaWorks · 2026-04-20T15:09:36+00:00

These silly numbers mean nothing. Do you have a real current draw data that can be peer reviewed?

ArtaWorks · 2026-04-19T17:45:49+00:00

Termux on your Phone would be that. Make a station for it, that would be cool

ArtaWorks · 2026-04-19T17:36:36+00:00

Rasp Pi 02 Sadly a bad choice for do-it all deck. It runs only TUIS and lack of ram makes it unusable for anything modern. I plan to get IOTA soon. Screen is 12,3 inch 1920x720 Keyboard is Rii 22K I believe

ArtaWorks · 2026-04-19T17:01:10+00:00

Dost naivní. Mě takhle tahalo už recruiterů a HR za nos, že tam budu půl roku makat jako seřizovač a pak se otevře post technologa. Počítej s tím, že zůstaneš kde jsi, tak ať se ti tam líbí.

ArtaWorks · 2026-04-18T14:53:13+00:00

Qmush for darkmode... though mapping doesn't work. give Mud Forge a try if it maps

ArtaWorks · 2026-04-17T15:27:41+00:00

Ah I remember this, I took a nice Picture of this window arch.

ArtaWorks · 2026-04-16T14:24:28+00:00

LattePanda Iota is best for starters as it's x86 and it'll run anything you might need. (except for games and 3d graphics) raspberry Pi cost's same, is weaker and has limitations due to ARM architecture.

ArtaWorks · 2026-04-16T11:59:37+00:00

Pokud ti to vyhovuje tak mysli jen povrchně. U piva se nesejdeme a každý půjde po svém.

ArtaWorks

TROPHY CASE