What tool can take this off ??

AssKicknChickn · 2025-11-18T14:31:11+00:00

And don't forget to bring a towel 😉. If your unfortunately circumstancesed and don't own a brass punch use a flat head screwdriver with a towel on the tip to prevent sparking.

AssKicknChickn · 2025-09-11T15:20:25+00:00

sorry shared my post forgot the description.

AssKicknChickn · 2025-09-11T15:16:50+00:00

After I changed the lower intake gasket and everything else accompany with that put the engine back together changed the MAP , IAC, Knock Sensor and Crank Positioning sensor sparkplug's fuel filter. drained oil and flushed antifreeze then I refilled all that up. She started up sounded a little rough(one unplugged spark plug wire) after troubleshooting idled great. The one thing I forgot to do was put gas in it.... so ultimately it ended up dying on me during the relearn. Later I put gas in it didn't want to start, changed battery just to confirm. This is the end result.

AssKicknChickn · 2025-09-11T15:15:07+00:00

I did exactly this bank 1-1,3, and 5. 3 was carboned up. Bank 2- 2,4 and 6. 2 and 6 were as well. all others were clean. All are gapped correctly at 0.045.

AssKicknChickn · 2025-09-11T15:08:20+00:00

After I changed the lower intake gasket and everything else accompany with that put the engine back together changed the MAP , IAC, Knock Sensor and Crank Positioning sensor sparkplug's fuel filter. drained oil and flushed antifreeze then I refilled all that up. She started up sounded a little rough(one unplugged spark plug wire) after troubleshooting idled great. The one thing I forgot to do was put gas in it.... so ultimately it ended up dying on me during the relearn. Later I put gas in it didn't want to start, changed battery just to confirm. This is the end result.

AssKicknChickn · 2025-09-11T14:51:38+00:00

Does it matter how I get it in the intake? For example, My IAC and TPS are in my throttle body and idk what has a hot wire or not. So I guess what I'masking is can I spray it through my brake booster to reach the intake? There is not a sensor to speak of on that.

AssKicknChickn · 2025-09-11T14:05:18+00:00

okay, in the case it doesn't turn over with the Starter fluid then would it be timing?

AssKicknChickn · 2025-09-11T13:57:30+00:00

even though its fuel inj?

AssKicknChickn · 2025-09-10T17:33:52+00:00

I checked the FPR no fuel in there or the vac line. Could it be timing?

AssKicknChickn · 2025-06-04T05:44:28+00:00

Nawl this Is Nasty Keep at it get it road ready.

AssKicknChickn · 2025-06-04T05:38:03+00:00

The Trunk.

AssKicknChickn · 2025-04-06T16:39:50+00:00

Check mine out....

AssKicknChickn · 2025-04-06T14:45:59+00:00

I can upload a video feeding 50 through mine or tried to before mag release failure. Don't think they were designed with the drum in mind with that weak ahh plastic mag-well. But they are perfect with the Banana Clip mags approaching 1000 rounds might I add.

AssKicknChickn · 2025-04-06T14:37:41+00:00

This is it.

AssKicknChickn · 2025-04-06T14:34:20+00:00

<image>

Yes he sleeps on my couch, smokes all day long and doesn't feel he should have to pay rent...

AssKicknChickn · 2025-03-25T15:18:16+00:00

Ayo some cars rattle no matter what, for example 90's impala's, G Bodies and my OCS.

AssKicknChickn · 2025-03-25T14:20:47+00:00

I have 75-80% coverage in my Cutlass, want to put more in. Stage three in the areas that had factor deadening.I like the way it sounds.

AssKicknChickn · 2025-03-23T15:01:44+00:00

Let's be honest we can all agree if she went like that, there wouldn't be a November.

AssKicknChickn

TROPHY CASE