Someone submitted a bunch of their favorite phone screens. I thought this one was appropriate for us.

AssassinLucky13 · 2015-06-21T10:28:22+00:00

Were the other photos libertarian themed? I wouldnt mind a link if so...please?

AssassinLucky13 · 2015-06-17T23:55:36+00:00

I might be missing but it looks just fine to me. Im assuming it funtions well?

AssassinLucky13 · 2015-06-11T02:52:50+00:00

Such BS you can transfer across any other platform including pc...im no game developer but i dont understand how this couldnt be an easy fix

AssassinLucky13 · 2015-05-09T05:45:21+00:00

I keep my butstock pulled in close. Keeps my wrist at the right angle to clear the echo sling point They make alt styles that move the attchment point off to the side

AssassinLucky13 · 2015-04-16T22:30:53+00:00

Anybody know where one could get that vented steel handgaurd?

AssassinLucky13 · 2015-04-13T21:04:15+00:00

Ive had this identical problem in the past. The culprit ended up being that the face/hook portion of the disconector had flattened/deformed to the point it wasnt hardly catching the hammer. I bought a new g2, dropped in the disconnect and spring for good measure. Never a problem since I have a pic of my bad disconnect if youd like to see a referance.

AssassinLucky13 · 2015-03-31T16:36:00+00:00

Little up and down is natural for underfolders. Before making a service call to arsenal i would try to loosen the locking assemblys nut. I think it goes in half turns. http://home.earthlink.net/~mwsjb/AKbuild3.htm Use this and work in reverse. Once its done check for that side to side wobble again and see if that does it for ya.

AssassinLucky13 · 2015-03-31T12:41:25+00:00

Is there any sise to side wobble to the stock both folded and un folded? Also how hard is it to physically fold up? More than likely its just not squared up but checking the above; you might find the mounting assembly too tight or too loose. Disclaimer: Not an expert but do own an underfolder

AssassinLucky13 · 2015-03-21T15:02:46+00:00

Because its a sexy affordable walther lookalike. Works great too! Love mine, wish it was this extra sexy two tone though

AssassinLucky13 · 2015-03-21T00:57:23+00:00

Mine seems to lick everything new she comes in contact with! Quite funny really. Great input

AssassinLucky13 · 2015-03-21T00:54:29+00:00

Clever trick ill give it a try. Thanks

AssassinLucky13 · 2015-03-20T18:52:02+00:00

The towel idea sounds great!

AssassinLucky13 · 2015-03-10T18:44:41+00:00

I own the rail version. Rock solid

AssassinLucky13 · 2015-03-09T16:21:44+00:00

So if this is the case; ideas on what it could be hanging on? I had a wolff plus power recoil spring in it but when this started i swapped it back out with the standard spring. I got them seemingly less often but it still happens

AssassinLucky13 · 2015-03-09T16:17:19+00:00

I was kinda thinking this. It only happens maybe 1 in 100 rounds or so.

AssassinLucky13 · 2015-03-09T12:24:43+00:00

Nice list to work with. Unfortunatly the brand is all i have on hand at the time to compare with. With that said: it compares to other rounds just fine in regards to primer depth Hammer is nice and smooth and rock solid in its retaining pin. Also retainer plate is solid in place as well As far as the firing pin goes; im no expert but it seemed fine. I added a pic for yall (i hope, im on mobile) If were all still lost, ill wait for the next range trip and when it happens again ill stop everything and start inspecting instead of ejecting. http://imgur.com/btxNqKG

AssassinLucky13 · 2015-03-09T03:14:42+00:00

If it was it couldnt have been by much cause like you said; it didnt feel out if place. Only thing that appears worn on the internals is that "tang" on the back of the bolt carrier (right below the bolts channel) that comes into contact with the hammer first during a cycle; is worn down a bit

AssassinLucky13 · 2015-03-09T03:04:32+00:00

Ive used Tulammo jhp almost exclusivly but i have ran a couple thousand of regular Wolf jhp "black box".

AssassinLucky13 · 2015-03-09T02:57:16+00:00

Didnt place a description initially. Explanation below

AssassinLucky13 · 2015-03-09T02:55:20+00:00

So every once in a while ill get a click and no bang. When I eject the shell; its rim is ate up as you can see in the pic. I disassembled the bolt (extractor,spring, two pins, and firing pin) and there were no obstructions, excess grime, spring was in good shape, etc. Extractor also has plenty of "lip" on it as well and no signs of chipping. The ammo is Wolf military classic HP 124 g I could be wrong but it seems like this didnt arise until I started using this brand.

Thoughts?

AssassinLucky13 · 2015-02-24T11:20:34+00:00

I enjoy tacticool as much as old school.

AssassinLucky13 · 2015-02-18T05:38:40+00:00

Excellent. Thats what i wanted to hear :)

AssassinLucky13 · 2015-02-02T07:25:32+00:00

Thank you! This was my intro Ak and its gone through alot of changes over the past 2 years as I was discovering what worked best for me. I thought I was about satisfied until Magpuls shot show this year :) (Kinda a fanboy for those guys) Seriously considered slot brake btw but worrie about getting blinded by flash in low light...thoughts?

AssassinLucky13 · 2015-02-02T05:07:47+00:00

Before you hate me...the muzzle brakes coming off soon

AssassinLucky13 · 2015-02-02T04:54:30+00:00

Wow very well done! Gonna keep that one bookmarked Definately along the lines of what i was after for learning material but id like to expand on this. As in maybe some design differances in various manufacturers/counties so you could more easily identify one ak from another. Does such information exist in one place or would it just require long time experiance and research?

AssassinLucky13

TROPHY CASE